What is Beam Spread
Beam spread is the dispersion or diffusion of light emitted from a flashlight or light fixture. It is a measurement of the angle at which the light beam spreads out from the center, determining the coverage area and intensity of the light. The beam angle is a specific value that indicates the angle of beam spread from the center of the beam. It is measured by drawing an imaginary line from the center of the light source to the point where the light intensity at the outer edges of the beam drops to 50 percent of the maximum. A narrow beam angle is characteristic of a spotlight, providing focused and concentrated illumination for smaller areas. In contrast, a wider beam angle is typical of a floodlight, dispersing light over a larger area.
Additionally, the field angle is a measurement of the angle from the centerline of the beam to a point where the light intensity is significantly reduced, usually around 10 percent of the maximum. This angle, also known as the cut-off angle, indicates the effective lighting area of a light bulb or fixture design.
人感センサーを活用した省エネソリューションをお探しですか？
PIR人感センサー、人感センサー搭載省エネ製品、人感センサースイッチ、商業施設向けOccupancy/Vacancy（在室/不在）ソリューションについては、お気軽にお問い合わせください。
Beam spread values are typically expressed in terms of angles rather than distances. Lighting designers utilize these angles to determine the placement of fixtures in a space, considering factors such as desired light intensity and color temperature. By analyzing the beam and field angle data, designers can achieve optimal coverage and distribution of light in a given area.
こちらの商品もおすすめです
- 無電圧接点リレー出力付き天井取り付け型PIR人感センサー
- 12/24VDCまたは12/24VAC低電圧電源
- EMS、HVAC、および建物制御入力用COM、NO、NC絶縁リレー接点
- 低電圧DC天井埋め込み型マイクロ波人感センサースイッチ
- 10～30 VDC範囲の12 VDC / 24 VDC入力
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた最大動作電流10A仕様
- 高負荷対応型 埋込型天井取付けマイクロ波人感センサースイッチ
- 100-265 VAC 商用電源入力、10Aモデル
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた5.8 GHzマイクロ波検知
- 埋込型天井取付けマイクロ波人感センサースイッチ
- 100-265 VAC商用電圧入力、5Aモデル
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた5.8 GHzマイクロ波検知
- 220V電源対応 天井取付けRZ037 PIR（赤外線）人感センサー調光器
- 定格負荷660W、最大動作電流3A
- LUXボタンによる照度センサーのON/OFFおよびユーザー設定の調光明るさ制御
- 110V電源対応 天井取付けRZ037 PIR（赤外線）人感センサー調光器
- 定格負荷330W、最大動作電流3A
- LUXボタンによる照度センサーのON/OFFおよびユーザー設定の調光明るさ制御
- 低電圧DC対応 天井取付けマイクロ波人感センサースイッチ
- 10～30 VDC範囲の12 VDC / 24 VDC入力
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた最大動作電流10A仕様
- 高負荷対応 天井取付型マイクロ波人感センサースイッチ
- 100-265 VAC 商用電源入力、10Aモデル
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた5.8 GHzマイクロ波検知
- 天井取り付け型マイクロ波人感センサースイッチ
- 100-265 VAC商用電圧入力、5Aモデル
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた5.8 GHzマイクロ波検知
- 低電圧DC埋込型天井PIR人感センサースイッチ
- 10～30 VDC範囲の12 VDC / 24 VDC入力
- 最大動作電流10A（調整可能なタイムラグ、照度閾値、感度設定付き）
- 高負荷対応 埋込型天井PIR人感センサースイッチ
- 100-265 VAC 商用電源入力、10Aモデル
- 360度検知（調整可能なタイムラグ、照度閾値、感度設定付き）
- 埋込型天井PIR人感センサースイッチ
- 100-265 VAC商用電圧入力、5Aモデル
- 360度検知（調整可能なタイムラグ、照度閾値、感度設定付き）
- 屋内用照明ON/OFF制御ワイヤレススイッチ＆受信機キット
- 100-230VAC、50/60Hz、定格電流5A受信機
- 2.4GHz通信対応 CR2032電池駆動ワイヤレススイッチ
- Occupancy（自動点灯/自動消灯）
- 12–24V DC (10–30VDC)、最大10A
- 360°検知エリア、直径8–12m
- タイムラグ 15秒–30分
- 照度センサー オフ/15/25/35 Lux
- 高/低感度
- 自動点灯/自動消灯人感モード
- 100–265V AC, 10A（中性線必須）
- 360°検知範囲、検知直径8–12 m
- タイムデレイ15秒–30分、Lux OFF/15/25/35、感度 高/低
- 自動点灯/自動消灯人感モード
- 100–265V AC, 5A（中性線必須）
- 360°検知範囲、検知直径8–12 m
- タイムデレイ15秒–30分、Lux OFF/15/25/35、感度 高/低
- 100V-230VAC
- 伝送距離：最大20m
- ワイヤレス人感センサー
- 有線制御
よくある質問
Why Does a Light Beam Spread
As the light beam moves away from the surface it is directed at or when the beam width is increased, it naturally spreads out and its intensity decreases. This phenomenon can be observed when using a torch and adjusting its distance from a wall, as the spread and intensity of the light will vary accordingly.
What Is Beam Spread Measured In
The measurement of beam spread refers to the diameter of the light projected onto the subject. To put it simply, if you were to shine a flashlight on a wall, the width of the illuminated circle would represent the beam spread. This measurement is typically expressed in feet. In the context of this discussion, we define beam spread as the area that receives 50% of the light power.
What Is the Beam Spread of a Flood Light
Flood lights typically have a beam spread ranging from over 45 degrees to approximately 120 degrees. Nevertheless, it is worth noting that certain lights advertised as floods may have a narrower beam angle of around 25 degrees. If you specifically require a light with such a narrow beam, it may be more suitable to consider spotlights instead.
What Beam Spread for Ceiling Height
Overlapping beam angles are important to ensure that the entire space is adequately illuminated, reducing the risk of accidents. For ceilings with a standard height of approximately 7.9 to 8.9 feet, a wider beam angle of 60 degrees or more is suitable. However, if your ceiling height exceeds 8.9 feet, a narrower beam angle of 45 degrees or less will be necessary.
What Happens When the Light Is More Spread Out
Light spreads out in a similar manner to how butter spreads from a gun. In other words, as light moves away from a point source, its intensity decreases due to its increased dispersion (similar to the decreased thickness of butter).
