What is incandescent filament lamp
An incandescent filament lamp, also known as an incandescent lamp or bulb, is an electric light source that operates based on the principle of incandescence. Incandescence refers to the emission of light caused by heating a filament. These lamps are commonly used in various lighting applications and are known for their affordability.
The construction of an incandescent filament lamp involves several components. The lamp consists of a glass bulb that encloses a tungsten filament. The bulb is filled with an inert gas, typically argon or nitrogen, to reduce the evaporation of the filament and extend the lamp’s lifespan. The filament itself is made of tungsten, a metal with a high melting point and heat resistance.
The base of the lamp contains contact wires, which provide electrical connections to the filament. Support wires are also present to give support to the filament. The lamp includes a glass mount or support that is connected to the base, allowing electrical contacts to pass through the envelope without any air or gas leaks. The base of the lamp is typically made of brass, protected with plaster of Paris or porcelain, and may have an outer layer of aluminum for added strength. The lamp’s electrical foot contacts, located at the base, are coated with a material to protect against electricity.
您可能也會感興趣
- 吸頂式 PIR 人體感應器，配備乾觸點繼電器輸出
- 12/24VDC 或 12/24VAC 低電壓供電
- 用於 EMS、HVAC 和建築控制輸入的 COM、NO 和 NC 隔離繼電器觸點
- 低壓直流嵌入式天花安裝微波人體感應開關
- 12 VDC / 24 VDC 輸入，支援 10-30 VDC 範圍
- 最大工作電流 10A，配備可調節延時、光感閾值及靈敏度
- 高負載嵌入式天花安裝微波人體感應開關
- 100-265 VAC 市電輸入，10A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 嵌入式天花安裝微波人體感應開關
- 100-265 VAC 市電輸入，5A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 適用於 220V 電源的天花安裝 RZ037 PIR 被動式紅外線佔空感應調光開關
- 最大工作電流 3A，額定負載 660W
- LUX 按鈕控制光線感應器開關及用戶設定之調光亮度
- 適用於 110V 電源的天花安裝 RZ037 PIR 被動式紅外線佔空感應調光開關
- 最大工作電流 3A，額定負載 330W
- LUX 按鈕控制光線感應器開關及用戶設定之調光亮度
- 低壓直流天花安裝微波人體感應開關
- 12 VDC / 24 VDC 輸入，支援 10-30 VDC 範圍
- 最大工作電流 10A，配備可調節延時、光感閾值及靈敏度
- 高負載吸頂式微波動態感應器開關
- 100-265 VAC 市電輸入，10A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 吸頂式微波動態感應器開關
- 100-265 VAC 市電輸入，5A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 低壓直流嵌頂式 PIR 動態感應器開關
- 12 VDC / 24 VDC 輸入，支援 10-30 VDC 範圍
- 最大工作電流 10A，具備可調式時間延遲、光照度閾值及靈敏度
- 高負載嵌頂式 PIR 動態感應器開關
- 100-265 VAC 市電輸入，10A 型號
- 360度偵測，具備可調式時間延遲、光照度閾值及靈敏度
- 嵌頂式 PIR 動態感應器開關
- 100-265 VAC 市電輸入，5A 型號
- 360度偵測，具備可調式時間延遲、光照度閾值及靈敏度
- 用於室內開關照明控制的無線開關及接收器套裝
- 100-230VAC，50/60Hz 接收器，額定電流 5A
- CR2032 電池供電無線開關，採用 2.4GHz 通訊
- 佔用感應（自動開啟/自動關閉）
- 12–24V DC (10–30VDC)，最高 10A
- 360° 覆蓋，直徑 8–12 米
- 延遲時間 15 秒至 30 分鐘
- 光感應器 關閉/15/25/35 Lux
- 高/低靈敏度
- 自動開啟/自動關閉佔用模式
- 100–265V AC，10A（需接零線）
- 360° 全方位覆蓋；8–12 米偵測直徑
- 延遲時間 15 秒至 30 分鐘；Lux 關閉/15/25/35；靈敏度 高/低
- 自動開啟/自動關閉佔用模式
- 100–265V AC，5A（需接零線）
- 360° 全方位覆蓋；8–12 米偵測直徑
- 延遲時間 15 秒至 30 分鐘；Lux 關閉/15/25/35；靈敏度 高/低
- 100V-230VAC
- 傳輸距離：最遠 20 米
- 無線動態感應器
- 有線控制
In terms of operation, an incandescent filament lamp works by passing an electric current through the filament. As the filament heats up, it emits light, producing illumination. Tungsten filaments used in these lamps can reach temperatures as high as 4,500 degrees Fahrenheit. The glass enclosure of the lamp prevents oxygen from reaching the filament, preventing it from overheating and oxidizing.
Incandescent filament lamps are commonly used for task lighting and are available in various sizes, voltages, and wattages. They are often used with dimmers in many applications. These lamps have a relatively short lifespan, typically around 800 hours, and are known for their high energy consumption. However, they remain popular due to their low cost and versatility in different lighting scenarios.
正在尋找動態感應節能解決方案？
歡迎聯絡我們以獲取完整的 PIR 動態感應器、動態感應節能產品、動態感應器開關以及人體感應／無人感應商業解決方案。
常見問題
What Is Difference Between Incandescent and LED
Incandescent bulbs are the traditional type of bulb that generate light by heating a wire with electricity. On the other hand, LEDs (light-emitting diodes) use semi-conductive material and electrodes to emit visible light when a current passes through them.
Is There a Ban on Incandescent Light Bulbs in 2023
The Department of Energy (DOE) is not implementing a complete ban on incandescent light bulbs. Instead, they are specifically targeting the ones that are commonly used in homes and are not energy efficient. The DOE issued a warning to manufacturers and retailers about this change in January, and it will be fully enforced starting in July 2023.
What Light Bulb Is the Brightest
LED light bulbs are the brightest option available. They utilize a light-emitting diode (LED), which is a solid-state semiconductor that emits light when an electric current passes through it. These bulbs are highly efficient, emitting more lumens per watt, and have a lifespan that is 20 times longer than incandescent bulbs.
What Is the Most Efficient Home Lighting
LED bulbs are considered the most efficient choice for home lighting. In addition to being energy efficient, they provide various advantages such as long lifespan, high brightness, and reduced electricity expenses. LEDs consume less power to produce a significant amount of brightness while operating at a low temperature. On average, LED bulbs can last up to 25,000 hours.
What Is Better LED or Incandescent
LED bulbs are a much more energy-efficient option compared to incandescent lights. According to Energy.gov, LEDs consume 75% less energy than incandescents. Additionally, they have a significantly longer lifespan, lasting up to 25 times longer. Unlike incandescent bulbs, which burn out quickly, LEDs can endure multiple years of regular use.
Is a 60 Watt LED Bulb Brighter Than a 60 Watt Incandescent Bulb
Lumens are used to measure brightness. In the case of a 60-watt incandescent bulb, it produces approximately 800 lumens of light. However, an LED bulb, which only uses about 9 watts, also produces the same 800 lumens.
