RZ047-5A 360度吸頂式微波動態感應器開關
RZ047-5A is a 100-265 VAC ceiling-mounted microwave motion sensor switch for automatic indoor lighting control.
The 5A model uses high-frequency microwave Doppler sensing, neutral-required AC wiring, adjustable time delay, selectable Lux threshold, and high/low sensitivity for ceiling-mounted lighting control.
- 100-265 VAC 市電輸入，5A 型號
- 5.8 GHz 微波感應，360 度全方位覆蓋
- 手動條件下 8-12 m 的感應直徑
- 延時時間：15 秒至 30 分鐘
- Lux 光敏設定：關閉、15、25 或 35 Lux
產品亮點
- 5A 交流電型號： 100-265 VAC ceiling microwave sensor switch for verified RZ047-5A load ratings.
- 微波感應： 5.8 GHz 多普勒感應，提供 360 度天花板覆蓋範圍。
- 安裝人員設定： 用於時間延遲、Lux 光敏閾值及高/低靈敏度的按鈕設定。
未找到您需要的產品？ 瀏覽我們的產品系列：
諮詢專家
5A Ceiling Microwave Sensing For Automatic Lighting
The RZ047-5A is a ceiling-mounted microwave motion sensor switch for indoor automatic lighting control where overhead sensing is preferred over a wall switch.
It uses 100-265 VAC live, neutral, and load wiring, with push-button adjustment for time delay, Lux threshold, and high/low sensitivity after installation.
360-Degree Microwave Coverage For Everyday Rooms
Microwave Doppler sensing can detect movement through many non-metal materials such as glass, plastic, and thin partitions, which helps ceiling placement cover practical indoor room layouts.
Because that same sensitivity can also detect movement outside the intended area, installers should reduce sensitivity or relocate the sensor when doors, windows, partitions, metal surfaces, or moving fixtures cause nuisance triggering.
功能、優勢、規格
The RZ047-5A combines 5A AC lighting control, 5.8 GHz microwave detection, and adjustable ceiling-sensor settings so installers can verify load fit, placement, and setup before ordering.
功能與優勢
- 5A 線電壓控制： Supports 100-265 VAC lighting circuits with the source-backed RZ047-5A load ratings shown in the specifications.
- 5.8 GHz 微波感應： 高頻多普勒感應可主動偵測移動，實現天花板安裝式自動照明控制。
- 360 度天花板覆蓋範圍： 天花板位置可提供廣闊的房間覆蓋範圍，在手冊測試條件下偵測直徑達 8-12 m。
- 非金屬材質穿透： 微波偵測可穿透多種塑膠、玻璃及薄隔板，而金屬則會阻擋偵測。
- 可調延遲時間： Choose 15 s, 30 s, 1 min, 3 min, 5 min, 10 min, or 30 min to match room traffic patterns.
- 可選的光照度（Lux）門檻： 可設定為關閉（Off）、15 Lux、25 Lux 或 35 Lux，使負載僅在環境光線條件符合安裝需求時才對移動作出反應。
- 高/低靈敏度： SENS 按鈕有助減少穿過房門、玻璃、隔板或相鄰空間引起的誤動作。
- 功能
-
型號
RZ047-5A
產品類型
吸頂式微波動態感應器開關
感應器類型
高頻微波多普勒（HF）
微波頻率
5.8 GHz ISM 頻段
傳輸功率
0.4 mW
延時設定
15 秒、30 秒、1 分鐘（預設）、3 分鐘、5 分鐘、10 分鐘、30 分鐘
光感應等級
關閉、15 Lux、25 Lux (預設)、35 Lux
靈敏度
高或低
材料穿透力
可穿透大多數塑膠、玻璃及薄隔板進行偵測；金屬會阻擋偵測
- 電氣參數
-
電源
100 VAC ~ 265 VAC
電源頻率
50/60 Hz
接線方式
白線接中性線（零線）；紅線接負載；黑線接火線（相線）
功耗
<=0.5 W standby; 1 W operation
白熾燈 / 鹵素燈負載
500 W / 110 VAC; 1100 W / 220 VAC
螢光燈 / 鎮流器 / LED 負載
250 W / 110 VAC; 500 W / 220 VAC
- 偵測與安裝
-
偵測直徑
8-12 m
偵測範圍
360度天花覆蓋範圍
安裝高度
2.5-5 m
工作溫度
-10 至 +40 C
工作濕度
< 93% RH 非凝結
金屬避讓距離
與大型金屬或高反射表面保持至少 1 m 距離；切勿完全封閉於金屬內
安裝注意事項
應避開窗戶、門、自動門、旋轉設備、暖通空調（HVAC）氣流、風扇、運動中的機械及會引致振動的設施，以免引起誤動作。
常見問題
How is the RZ047-5A different from a PIR ceiling sensor?
RZ047 uses high-frequency microwave Doppler sensing. It can detect through many non-metal materials such as glass, plastic, and thin partitions, while metal blocks detection.
Does the RZ047-5A need a neutral wire?
Yes. The AC wiring diagram requires White to Neutral, Red to Load, and Black to Live.
What loads can the 5A model control?
The manual lists 500 W / 110 VAC and 1100 W / 220 VAC for incandescent or halogen loads, and 250 W / 110 VAC and 500 W / 220 VAC for fluorescent, ballast, or LED loads.
Can microwave sensing trigger from outside the room?
Yes. The manual warns that microwave sensing can detect through glass, doors, or partitions, so sensitivity should be reduced or the sensor relocated if nuisance detection occurs.
What settings can installers adjust?
Installers can adjust time delay, Lux threshold, and high/low sensitivity using the buttons under the top cover.
Where should the RZ047 be installed?
The manual lists a 2.5-5 m installation height and recommends avoiding windows, doors, automatic doors, rotating equipment, HVAC airflow, fans, moving machinery, vibrating fixtures, and large metal surfaces.
商品評價
目前沒有評價。