What is E26/E27
E26/E27 is a term used in the lighting industry to describe the standard screw-in base types for light bulbs. The E26 base is the standard base used in North America, while the E27 base is the standard base used in Europe. These bases are commonly referred to as Edison screw bases.
Rayzeek人感センサーのポートフォリオを見る.
お探しの製品が見つかりませんか？ご安心ください。課題を解決する手段は常に複数存在します。当社の製品ポートフォリオのいずれかがお役に立つかもしれません。
The main difference between the E26 and E27 bases lies in their mechanical design and the required standard voltage. The E26 base is designed for use with 120V AC voltage, which is the standard voltage in North America. On the other hand, the E27 base is designed for use with 240V AC voltage, which is the standard voltage in Europe.
In terms of specific dimensions, there are slight variations between the E26 and E27 bases. The length of the screw for the E26 base is typically around 19.56 mm, while for the E27 base it is around 22.0 mm. The live contact pad width for the E26 base ranges from 9.14 mm to 11.56 mm, while for the E27 base it ranges from 4.8 mm to 11.5 mm. The insulator height for the E26 base is typically around 3.25 mm, while for the E27 base it is around 5 mm. The screw diameter at the thread peak for both bases is approximately 26.05 mm to 26.41 mm. The screw diameter at the thread trough is slightly smaller for the E27 base, measuring around 24.26 mm compared to 24.72 mm for the E26 base. The distance between threads, also known as the OC (on-center) distance, is the same for both bases, measuring approximately 3.629 mm.
こちらの商品もおすすめです
- 無電圧接点リレー出力付き天井取り付け型PIR人感センサー
- 12/24VDCまたは12/24VAC低電圧電源
- EMS、HVAC、および建物制御入力用COM、NO、NC絶縁リレー接点
- 低電圧DC天井埋め込み型マイクロ波人感センサースイッチ
- 10～30 VDC範囲の12 VDC / 24 VDC入力
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた最大動作電流10A仕様
- 高負荷対応型 埋込型天井取付けマイクロ波人感センサースイッチ
- 100-265 VAC 商用電源入力、10Aモデル
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた5.8 GHzマイクロ波検知
- 埋込型天井取付けマイクロ波人感センサースイッチ
- 100-265 VAC商用電圧入力、5Aモデル
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた5.8 GHzマイクロ波検知
- 220V電源対応 天井取付けRZ037 PIR（赤外線）人感センサー調光器
- 定格負荷660W、最大動作電流3A
- LUXボタンによる照度センサーのON/OFFおよびユーザー設定の調光明るさ制御
- 110V電源対応 天井取付けRZ037 PIR（赤外線）人感センサー調光器
- 定格負荷330W、最大動作電流3A
- LUXボタンによる照度センサーのON/OFFおよびユーザー設定の調光明るさ制御
- 低電圧DC対応 天井取付けマイクロ波人感センサースイッチ
- 10～30 VDC範囲の12 VDC / 24 VDC入力
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた最大動作電流10A仕様
- 高負荷対応 天井取付型マイクロ波人感センサースイッチ
- 100-265 VAC 商用電源入力、10Aモデル
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた5.8 GHzマイクロ波検知
- 天井取り付け型マイクロ波人感センサースイッチ
- 100-265 VAC商用電圧入力、5Aモデル
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた5.8 GHzマイクロ波検知
- 低電圧DC埋込型天井PIR人感センサースイッチ
- 10～30 VDC範囲の12 VDC / 24 VDC入力
- 最大動作電流10A（調整可能なタイムラグ、照度閾値、感度設定付き）
- 高負荷対応 埋込型天井PIR人感センサースイッチ
- 100-265 VAC 商用電源入力、10Aモデル
- 360度検知（調整可能なタイムラグ、照度閾値、感度設定付き）
- 埋込型天井PIR人感センサースイッチ
- 100-265 VAC商用電圧入力、5Aモデル
- 360度検知（調整可能なタイムラグ、照度閾値、感度設定付き）
- 屋内用照明ON/OFF制御ワイヤレススイッチ＆受信機キット
- 100-230VAC、50/60Hz、定格電流5A受信機
- 2.4GHz通信対応 CR2032電池駆動ワイヤレススイッチ
- Occupancy（自動点灯/自動消灯）
- 12–24V DC (10–30VDC)、最大10A
- 360°検知エリア、直径8–12m
- タイムラグ 15秒–30分
- 照度センサー オフ/15/25/35 Lux
- 高/低感度
- 自動点灯/自動消灯人感モード
- 100–265V AC, 10A（中性線必須）
- 360°検知範囲、検知直径8–12 m
- タイムデレイ15秒–30分、Lux OFF/15/25/35、感度 高/低
- 自動点灯/自動消灯人感モード
- 100–265V AC, 5A（中性線必須）
- 360°検知範囲、検知直径8–12 m
- タイムデレイ15秒–30分、Lux OFF/15/25/35、感度 高/低
- 100V-230VAC
- 伝送距離：最大20m
- ワイヤレス人感センサー
- 有線制御
よくある質問
How Do I Know if My Light Bulb Is Compatible
Every light fixture has a specific maximum wattage. To determine if your light bulb is compatible, it is important to select a bulb with a wattage that is equal to or lower than the maximum wattage indicated on your fixture. It is crucial to avoid using a high wattage bulb in a light fixture with a lower wattage capacity.
Do I Need an A19 or E26 Light Bulb Base
Yes, the A19 and E26 light bulb bases can be used interchangeably. The only distinction between the two is their size and shape. The standard base type for A19 light bulbs is E26. A19 bulbs are designed with an E26 base and can be inserted into sockets that are compatible with Edison bulbs.
How Do I Know if My Bulb Is E27
To determine if your bulb is E27, you can check the label on the base. The code used for the bulb base will be similar to the one used for the bulb itself. For instance, an E27 base refers to an Edison screw base that has a measurement of 27mm. The measurement is taken across the bottom of the screw or bayonet base.
What Is Difference Between E26 and A19
A19 is a term used to describe the shape and size of the bulb, while E26 refers to the type and size of the base. The “A” in A19 stands for Arbitrary, which is simply the name given to the familiar bulb shape. The number “19” represents the size of the bulb, specifically 19/8″ or 2 3/8″ across. On the other hand, E26 refers to the base of the bulb, which is the part that is inserted into the light socket.
Are E27 Bulbs Being Discontinued
The lamps that will no longer be allowed to be sold after October 1st, 2021 include self-ballasted compact fluorescent retrofit lamps with caps B22, E27, and others, as well as linear halogen R7s lamps with over 2,700 lumens. Additionally, 12V halogen reflector lamps such as MR11/GU4 and MR16/GU5 will also be discontinued.
Can You Use E27 in USA
E26 lamps are specifically designed for the North American market, where the standard voltage is 120V AC. On the other hand, E27 lamps are intended for use in other markets where the standard voltage is 240V AC.
