What is Bulb Base
A bulb base, also known as a socket or connector, is an essential component of a light bulb that enables it to connect to a power source and establish an electrical connection. It is located at the bottom part of the bulb and is responsible for securing the bulb in place within a socket or fixture. The bulb base comes in various types and sizes, each designed for specific applications.
Common types of bulb bases include screw bases and pin bases. Screw bases, such as the Edison base, are widely used and come in different sizes denoted by descriptive names and numbers. These sizes indicate the diameter of the base in millimeters. On the other hand, pin bases, like the bi-pin base, consist of two pins that protrude from the base and are inserted into corresponding sockets.
こちらの商品もおすすめです
- 無電圧接点リレー出力付き天井取り付け型PIR人感センサー
- 12/24VDCまたは12/24VAC低電圧電源
- EMS、HVAC、および建物制御入力用COM、NO、NC絶縁リレー接点
- 低電圧DC天井埋め込み型マイクロ波人感センサースイッチ
- 10～30 VDC範囲の12 VDC / 24 VDC入力
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた最大動作電流10A仕様
- 高負荷対応型 埋込型天井取付けマイクロ波人感センサースイッチ
- 100-265 VAC 商用電源入力、10Aモデル
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた5.8 GHzマイクロ波検知
- 埋込型天井取付けマイクロ波人感センサースイッチ
- 100-265 VAC商用電圧入力、5Aモデル
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた5.8 GHzマイクロ波検知
- 220V電源対応 天井取付けRZ037 PIR（赤外線）人感センサー調光器
- 定格負荷660W、最大動作電流3A
- LUXボタンによる照度センサーのON/OFFおよびユーザー設定の調光明るさ制御
- 110V電源対応 天井取付けRZ037 PIR（赤外線）人感センサー調光器
- 定格負荷330W、最大動作電流3A
- LUXボタンによる照度センサーのON/OFFおよびユーザー設定の調光明るさ制御
- 低電圧DC対応 天井取付けマイクロ波人感センサースイッチ
- 10～30 VDC範囲の12 VDC / 24 VDC入力
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた最大動作電流10A仕様
- 高負荷対応 天井取付型マイクロ波人感センサースイッチ
- 100-265 VAC 商用電源入力、10Aモデル
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた5.8 GHzマイクロ波検知
- 天井取り付け型マイクロ波人感センサースイッチ
- 100-265 VAC商用電圧入力、5Aモデル
- 調整可能なタイムラグ、照度（Lux）閾値、感度を備えた5.8 GHzマイクロ波検知
- 低電圧DC埋込型天井PIR人感センサースイッチ
- 10～30 VDC範囲の12 VDC / 24 VDC入力
- 最大動作電流10A（調整可能なタイムラグ、照度閾値、感度設定付き）
- 高負荷対応 埋込型天井PIR人感センサースイッチ
- 100-265 VAC 商用電源入力、10Aモデル
- 360度検知（調整可能なタイムラグ、照度閾値、感度設定付き）
- 埋込型天井PIR人感センサースイッチ
- 100-265 VAC商用電圧入力、5Aモデル
- 360度検知（調整可能なタイムラグ、照度閾値、感度設定付き）
- 屋内用照明ON/OFF制御ワイヤレススイッチ＆受信機キット
- 100-230VAC、50/60Hz、定格電流5A受信機
- 2.4GHz通信対応 CR2032電池駆動ワイヤレススイッチ
- Occupancy（自動点灯/自動消灯）
- 12–24V DC (10–30VDC)、最大10A
- 360°検知エリア、直径8–12m
- タイムラグ 15秒–30分
- 照度センサー オフ/15/25/35 Lux
- 高/低感度
- 自動点灯/自動消灯人感モード
- 100–265V AC, 10A（中性線必須）
- 360°検知範囲、検知直径8–12 m
- タイムデレイ15秒–30分、Lux OFF/15/25/35、感度 高/低
- 自動点灯/自動消灯人感モード
- 100–265V AC, 5A（中性線必須）
- 360°検知範囲、検知直径8–12 m
- タイムデレイ15秒–30分、Lux OFF/15/25/35、感度 高/低
- 100V-230VAC
- 伝送距離：最大20m
- ワイヤレス人感センサー
- 有線制御
The choice of bulb base depends on the specific lighting application and the compatibility with the socket or fixture. Different base types and sizes ensure that the bulb can securely fit into the appropriate socket and establish a reliable electrical connection. By understanding the concept of bulb base, one can select the right type and size of the base for their lighting needs.
Rayzeek人感センサーのポートフォリオを見る.
お探しの製品が見つかりませんか？ご安心ください。課題を解決する手段は常に複数存在します。当社の製品ポートフォリオのいずれかがお役に立つかもしれません。
よくある質問
Is A19 a Standard Bulb
Shaped like a snow cone, LED A19 bulbs are commonly recognized as the traditional light bulb shape. These bulbs have become widely adopted as the standard for household lighting in various areas such as living rooms and bedrooms.
What Is an A15 Bulb Base
Another popular type of A-series light bulb is the A15 bulb, which is frequently utilized in the United States for appliances and ceiling fans. The A15 bulb has a width of 15⁄8 inches (17⁄8 inches; 48 mm) at its widest point and stands at a height of 3.39 inches.
Why Do LED Light Bulbs Not Work in Some Fixtures
Reasons for LED light bulbs not functioning properly in certain fixtures can vary. Some common causes include a defective power supply, loose connections, a flawed circuit design, or even damage caused by water infiltration from rain. Regardless of the specific cause or any noticeable indicators, there is typically a solution available to address the problem.
What Are the Two Types of Bulb Bases
Normally, a bulb typically has two types of bases: a screw base or a bayonet base. The diameter of the base is measured for bulbs with a screw base, while the spacing between two pins is measured for bulbs with a pin base.
How Do You Identify a Bulb Base
The shape or form of the bulb base is indicated by the first letter, while the width of the base is represented by the number, usually in millimeters. For instance, our 11S14 bulb is equipped with an E26 base, where “E” signifies the Edison screw-in style and 26 denotes a base width of 26 mm.
What Is an E26 Light Bulb Base
The E26 light bulb base is the cap or base of a light bulb that enables both electrical and mechanical contact. The term “E” in E26 stands for Edison Screw, which is the most common type of lamp base. The number “26” represents the diameter of the base in millimeters, which is approximately 1 inch.
What Is E26 vs E27 vs A19
E27 (or E26 in the USA) refers to the size of the socket screw base, commonly known as a medium base. A19, on the other hand, represents the standard shape of an indoor light bulb. Additionally, there is a BR30 bulb shape available, which is designed to fit into standard ceiling can fixtures and also features the E26 medium base.
What Is A19 Bulb Size
An A19 light bulb has a diameter of 19/8″ or 2.375 inches. To determine the size of a light bulb, refer to the full size scale provided, which is calibrated in eighths.
