Interruttore con sensore di movimento a microonde da soffitto a 360 gradi RZ047-5A
RZ047-5A is a 100-265 VAC ceiling-mounted microwave motion sensor switch for automatic indoor lighting control.
The 5A model uses high-frequency microwave Doppler sensing, neutral-required AC wiring, adjustable time delay, selectable Lux threshold, and high/low sensitivity for ceiling-mounted lighting control.
- Ingresso tensione di linea 100-265 VAC, modello da 5A
- Rilevamento a microonde a 5,8 GHz con copertura a 360 gradi
- Diametro di rilevamento di 8-12 m in condizioni manuali
- Ritardo di spegnimento: da 15 s a 30 min
- Impostazione Lux: Disattivato, 15, 25 o 35 Lux
Caratteristiche principali del prodotto
- Modello 5A CA: 100-265 VAC ceiling microwave sensor switch for verified RZ047-5A load ratings.
- Rilevamento a microonde: Rilevamento Doppler a 5,8 GHz con copertura del soffitto a 360 gradi.
- Configurazione per l'installatore: Impostazioni tramite pulsante per ritardo spegnimento, soglia Lux e sensibilità alta/bassa.
Non è quello che stai cercando? Visualizza il nostro catalogo:
Consulti un esperto
Consegna rapida: 99% in magazzino
Linea completa di prodotti ad attivazione motoria
Richiedi informazioni per ordini all'ingrosso ODM/OEM
5A Ceiling Microwave Sensing For Automatic Lighting
The RZ047-5A is a ceiling-mounted microwave motion sensor switch for indoor automatic lighting control where overhead sensing is preferred over a wall switch.
It uses 100-265 VAC live, neutral, and load wiring, with push-button adjustment for time delay, Lux threshold, and high/low sensitivity after installation.
360-Degree Microwave Coverage For Everyday Rooms
Microwave Doppler sensing can detect movement through many non-metal materials such as glass, plastic, and thin partitions, which helps ceiling placement cover practical indoor room layouts.
Because that same sensitivity can also detect movement outside the intended area, installers should reduce sensitivity or relocate the sensor when doors, windows, partitions, metal surfaces, or moving fixtures cause nuisance triggering.
Caratteristiche, vantaggi, specifiche
The RZ047-5A combines 5A AC lighting control, 5.8 GHz microwave detection, and adjustable ceiling-sensor settings so installers can verify load fit, placement, and setup before ordering.
Caratteristiche e vantaggi
- Controllo tensione di rete da 5A: Supports 100-265 VAC lighting circuits with the source-backed RZ047-5A load ratings shown in the specifications.
- 5.8 GHz microwave sensing: High-frequency Doppler detection actively senses movement for ceiling-mounted automatic lighting control.
- 360-degree ceiling coverage: Ceiling placement gives broad room coverage with an 8-12 m detection diameter under manual conditions.
- Non-metal material penetration: Microwave detection can pass through many plastics, glass, and thin partitions, while metal blocks detection.
- Ritardo di spegnimento regolabile: Choose 15 s, 30 s, 1 min, 3 min, 5 min, 10 min, or 30 min to match room traffic patterns.
- Soglia Lux selezionabile: Set Off, 15 Lux, 25 Lux, or 35 Lux so the load responds to motion only when the ambient-light condition fits the installation.
- Sensibilità alta/bassa: The SENS button helps reduce nuisance detection through doors, glass, partitions, or adjacent spaces.
- Caratteristiche
-
Modello
RZ047-5A
Tipo di prodotto
Interruttore da soffitto con sensore di movimento a microonde
Tipo di sensore
High-frequency microwave Doppler (HF)
Microwave frequency
5.8 GHz ISM band
Transmission power
0.4 mW
Ritardo di spegnimento
15 s, 30 s, 1 min (predefinito), 3 min, 5 min, 10 min, 30 min
Livello del sensore di luce
Off, 15 Lux, 25 Lux (predefinito), 35 Lux
Sensibilità
Alta o Bassa
Material penetration
Detects through most plastics, glass, and thin partitions; metal blocks detection
- Elettricità
-
Alimentazione
100 VAC ~ 265 VAC
Frequenza di alimentazione
50/60 Hz
Cablaggio
Bianco a Neutro; Rosso a Carico; Nero a Fase
Power consumption
<=0.5 W standby; 1 W operation
Carico ad incandescenza / alogeno
500 W / 110 VAC; 1100 W / 220 VAC
Carico fluorescente / alimentatore / LED
250 W / 110 VAC; 500 W / 220 VAC
- Rilevamento e installazione
-
Diametro di rilevamento
8-12 m
Raggio di rilevamento
Copertura a soffitto a 360 gradi
Altezza di installazione
2.5-5 m
Temperatura di esercizio
Da -10 a +40 C
Working humidity
< 93% RH non-condensing
Metal clearance
Keep at least 1 m from large metal or highly reflective surfaces; do not fully enclose in metal
Installation notes
Avoid windows, doors, automatic doors, rotating equipment, HVAC airflow, fans, moving machinery, and vibrating fixtures that may cause nuisance detection
FAQ
How is the RZ047-5A different from a PIR ceiling sensor?
RZ047 uses high-frequency microwave Doppler sensing. It can detect through many non-metal materials such as glass, plastic, and thin partitions, while metal blocks detection.
Does the RZ047-5A need a neutral wire?
Yes. The AC wiring diagram requires White to Neutral, Red to Load, and Black to Live.
What loads can the 5A model control?
The manual lists 500 W / 110 VAC and 1100 W / 220 VAC for incandescent or halogen loads, and 250 W / 110 VAC and 500 W / 220 VAC for fluorescent, ballast, or LED loads.
Can microwave sensing trigger from outside the room?
Yes. The manual warns that microwave sensing can detect through glass, doors, or partitions, so sensitivity should be reduced or the sensor relocated if nuisance detection occurs.
What settings can installers adjust?
Installers can adjust time delay, Lux threshold, and high/low sensitivity using the buttons under the top cover.
Where should the RZ047 be installed?
The manual lists a 2.5-5 m installation height and recommends avoiding windows, doors, automatic doors, rotating equipment, HVAC airflow, fans, moving machinery, vibrating fixtures, and large metal surfaces.
Recensioni
Ancora non ci sono recensioni.