What is Lumen Maintenance
Lumen maintenance is the measurement of how well a lighting product retains its initial lumen output over time. It is a factor in evaluating the performance and longevity of light sources and luminaires. Lumen maintenance is typically expressed as a numerical value followed by the letter L or LM, which stands for lumen maintenance. This value represents the percentage of light output that remains after a certain number of hours of operation. Commonly used values include L50, L70, L80, and L90, or their LM equivalents.
從 Rayzeek 動態感測器產品組合中獲得靈感。
找不到您想要的產品？別擔心。總有其他方法可以解決您的問題。也許我們的其中一個產品組合可以幫到您。
For example, if a light source or luminaire is specified as L70 at 50,000 hours, it means that it will maintain 70% of its initial light output after 50,000 hours of use. This measurement provides an indication of how long the light source or luminaire will maintain a certain level of brightness before it starts to significantly degrade.
Lumen maintenance is an important consideration in lighting design and selection as it helps users understand how the brightness of a light source or luminaire will change over time. It allows for informed decisions about lighting needs and potential replacements. The nomenclature for lumen maintenance is evolving. The current practice of using L or LM values may not be sufficient for comparing products or determining their useful life. A new measure is emerging, which specifies lumen maintenance at a specific number of hours, such as 100,000 hours. This provides a more accurate representation of how well a light source or luminaire will maintain its brightness over a longer period.
您可能也會感興趣
- 吸頂式 PIR 人體感應器，配備乾觸點繼電器輸出
- 12/24VDC 或 12/24VAC 低電壓供電
- 用於 EMS、HVAC 和建築控制輸入的 COM、NO 和 NC 隔離繼電器觸點
- 低壓直流嵌入式天花安裝微波人體感應開關
- 12 VDC / 24 VDC 輸入，支援 10-30 VDC 範圍
- 最大工作電流 10A，配備可調節延時、光感閾值及靈敏度
- 高負載嵌入式天花安裝微波人體感應開關
- 100-265 VAC 市電輸入，10A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 嵌入式天花安裝微波人體感應開關
- 100-265 VAC 市電輸入，5A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 適用於 220V 電源的天花安裝 RZ037 PIR 被動式紅外線佔空感應調光開關
- 最大工作電流 3A，額定負載 660W
- LUX 按鈕控制光線感應器開關及用戶設定之調光亮度
- 適用於 110V 電源的天花安裝 RZ037 PIR 被動式紅外線佔空感應調光開關
- 最大工作電流 3A，額定負載 330W
- LUX 按鈕控制光線感應器開關及用戶設定之調光亮度
- 低壓直流天花安裝微波人體感應開關
- 12 VDC / 24 VDC 輸入，支援 10-30 VDC 範圍
- 最大工作電流 10A，配備可調節延時、光感閾值及靈敏度
- 高負載吸頂式微波動態感應器開關
- 100-265 VAC 市電輸入，10A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 吸頂式微波動態感應器開關
- 100-265 VAC 市電輸入，5A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 低壓直流嵌頂式 PIR 動態感應器開關
- 12 VDC / 24 VDC 輸入，支援 10-30 VDC 範圍
- 最大工作電流 10A，具備可調式時間延遲、光照度閾值及靈敏度
- 高負載嵌頂式 PIR 動態感應器開關
- 100-265 VAC 市電輸入，10A 型號
- 360度偵測，具備可調式時間延遲、光照度閾值及靈敏度
- 嵌頂式 PIR 動態感應器開關
- 100-265 VAC 市電輸入，5A 型號
- 360度偵測，具備可調式時間延遲、光照度閾值及靈敏度
- 用於室內開關照明控制的無線開關及接收器套裝
- 100-230VAC，50/60Hz 接收器，額定電流 5A
- CR2032 電池供電無線開關，採用 2.4GHz 通訊
- 佔用感應（自動開啟/自動關閉）
- 12–24V DC (10–30VDC)，最高 10A
- 360° 覆蓋，直徑 8–12 米
- 延遲時間 15 秒至 30 分鐘
- 光感應器 關閉/15/25/35 Lux
- 高/低靈敏度
- 自動開啟/自動關閉佔用模式
- 100–265V AC，10A（需接零線）
- 360° 全方位覆蓋；8–12 米偵測直徑
- 延遲時間 15 秒至 30 分鐘；Lux 關閉/15/25/35；靈敏度 高/低
- 自動開啟/自動關閉佔用模式
- 100–265V AC，5A（需接零線）
- 360° 全方位覆蓋；8–12 米偵測直徑
- 延遲時間 15 秒至 30 分鐘；Lux 關閉/15/25/35；靈敏度 高/低
- 100V-230VAC
- 傳輸距離：最遠 20 米
- 無線動態感應器
- 有線控制
常見問題
How Many Lumens Is Good for Eyes
Below 3500 lumens, our eyes experience a comfortable level of brightness. However, once the brightness of direct or reflected light exceeds 4000 lumens, the human eye begins to have difficulty receiving the light.
Is Higher Lumens Always Better
If you intend to use the device outdoors or in a room with significant ambient light, a high lumen count is crucial. This also applies to scenarios where you are utilizing a projector in a spacious area and/or need a larger screen size.
Is 1500 Lumens Too Much
If you are using candles as a light source, you will save a significant amount of money on electricity, but the amount of light emitted will be limited. For general lighting purposes, the U.S. Department of Energy recommends looking for light bulbs that have a brightness level ranging from 450 to 1,600 lumens.
