Kit: Low Voltage Controller + Wireless Motion Sensor

Kit: Low Voltage Controller + Wireless Motion Sensor

RZ016

$17.00

O RZ016A é o controlador principal, que se conecta à carga. O RZ016A liga/desliga a carga ao pressionar o botão ou ao receber o sinal sem fio do sensor de movimento (RZ016W). Se o sensor de movimento detectar movimento, ele enviará um sinal ao controlador principal (RZ016A) para ligar a carga.

If the motion sensor(RZ016W) does not detect the motion, after the time delay(adjustable) expires, the main controller will turn off the sensor. If the motion sensor detects the motion again, the motion sensor will give out a signal to turn on the load immediately. You can also adjust the time delay and the light level via the main controller if it’s connected to a light.
Saiba mais
Fale Conosco

Destaques do produto

  • RZ016A: Controlador principal plug-in
  • RZ016W: Sensores de movimento sem fio, alimentados por bateria
  • O RZ016A pode funcionar independentemente como um interruptor dimmer
  • O RZ016A pode ser emparelhado com 1 ou múltiplos RZ016W para expandir a cobertura de detecção

Consulte um Especialista

Entrega rápida: 99% em estoque

Linha completa de produtos ativados por movimento

Consulte para pedidos ODM/OEM em grande quantidade

Kit Interruptor com Sensor de Movimento RZ016

O sensor de movimento e controlador RZ016 é um kit de sensor de movimento com controle remoto para fitas de LED CC 12/24V. Com este kit, você pode transformar qualquer fita de LED em um modelo ativado por movimento num instante.

O kit consiste em dois dispositivos: O controlador RZ016A e o sensor de movimento RZ016W. Conecte o controlador às suas fitas de LED e está pronto. Quando o sensor de movimento detectar sua presença dentro do alcance, ele enviará um sinal ao controlador para ligar a luz conectada.

Multi-location Use Case

The RZ016 motion sensor kit can be used for multi-location control. The controller can pair with one, two, or multiple sensors. As long as either sensor detects motion and sends signals to the controller, the controller will turn on the light.

As the sensors are remotely connected with no wiring needed, it’s incredibly flexible and convenient for all types of complicated applications.

User-Friendly Operation

The RZ016 kit has 3 working modes. ON, OFF or Auto. In ON/OFF mode, the RZ016A controller can work standalone as a normal dimmer switch without the motion sensor.

  • Turn the light ON or OFF like a manual switch.
  • Adjust the light level like a dimmer switch.

In auto mode, the light is controlled by motion sensors automatically. You can additionally:

  • Select time delay from 15s to 900s.
  • Enable or disable the light sensor(35lux).

Plug and Play

The installation is as easy as it gets. The controller is a plug-in switch. You simply plug it in and replace the existing light strip inline switch.

Install two AAA batteries in the motion sensor. Turn on the motion sensor, and that’s it. The sensor and controller are already pre-paired from the factory.

Recursos, Benefícios, Especificações

Recursos e Benefícios

  • Time-Delay: Press this button to adjust the time delay, the time setting on the sensor from the last detected motion until the lights are turned OFF. There are 6 options for time delay:15s, 30s, 60s, 180s, 300s, 900s.
  • Light Level: Press this button to adjust the lighting light level. The light level will change from 20%~100%
  • Auto Mode: The main controller will be controlled by motion sensor (RZ016W) and turns on/off by receiving the signal from the motion sensor (RZ016W).
  • ON Mode: The main controller will turn on the load all the time. The motion sensor will not take effect.
  • OFF Mode: The main controller will turn off the load all the time. The motion sensor will not take effect.
RZ016A

Name

Controller-Receiver

Input Voltage

DC 12~24V

Output Voltage

Equal to input voltage

Load current

≤ 5A

Static power

≤ 10 uA

Mode

Auto/ON/OFF

Time Delay

15s, 30s, 60s, 180s, 300s, 900s Adjustable

Light Level

20%~100% Adjustable

RZ016W

Name

Motion Sensor-Emitter

Input Voltage

2pcs AAA batteries powered

Output Voltage

Equal to input voltage

Mode

1. Sensor ON/OFF, 2. Light Sensor ON(≤35lux)/OFF

Detect range

5~8 Meters

Wireless transmission range

7-20 Meters (7M when batteries voltage is lower than 2.5V)

Vídeos

RZ016 Installation

RZ016 User Guide

RZ016 Pairing Guide

EU rz022 occupancy sensor c2a

Expand Your Motion Sensors

View all our energy-saving products on motion sensors

Avaliações

Não há avaliações ainda.

Seja o primeiro a avaliar “Kit: Low Voltage Controller + Wireless Motion Sensor”

Você também pode gostar de…

Portuguese (Brazil)
English German French Spanish Portuguese (Portugal) Korean Indonesian Russian Arabic Japanese Turkish Italian Dutch Ukrainian Polish Greek Romanian Hebrew Czech Chinese Swedish Danish Hindi Thai Portuguese (Brazil)