RZ048 12V/24V 360-Degree Recessed Ceiling Microwave Motion Sensor Switch
RZ048 12V/24V is the low-voltage DC version of the recessed ceiling microwave motion sensor switch for compatible DC lighting projects.
It follows the same low-voltage pattern as the comparable Rayzeek 12V/24V ceiling sensor models, using 12 VDC or 24 VDC constant-voltage input, a 10-30 VDC input range, and 10A max work current.
- 12 VDC / 24 VDC input, 10-30 VDC range
- Max work current: 10A
- 360度をカバーする5.8 GHzマイクロ波検知
- 8-12 m detection diameter under RZ048 family conditions
- タイムディレイ：15秒〜30分
製品の特長
- 12V/24V DC model: Low-voltage RZ048 version for constant-voltage DC lighting control.
- 10A max work current: Low-voltage DC model for compatible DC loads.
- マイクロ波検知： 360度の天井カバー範囲を備えた5.8 GHzドップラー検知。
お探しの製品ではありませんか？ 製品ポートフォリオを見る：
専門家に相談する
Low-Voltage DC Microwave Sensing For 12V/24V Lighting
The RZ048 12V/24V model is the low-voltage DC version of the recessed RZ048 ceiling microwave sensor family, intended for projects using a constant-voltage 12 VDC or 24 VDC power supply.
It keeps the same recessed 360-degree microwave sensing concept while separating DC lighting projects from the 100-265 VAC 5A and 10A RZ048 models.
Low-Voltage DC Sensing For 12V/24V Lighting Projects
Use this version when the lighting control design is built around compatible low-voltage DC power rather than standard AC line voltage.
The microwave sensing behavior still requires careful placement because movement through glass, thin partitions, or nearby spaces may be detected unless sensitivity and location are adjusted for the room.
特長、メリット、仕様
The RZ048 12V/24V model combines low-voltage DC power, recessed mounting, and 5.8 GHz microwave detection so buyers can confirm DC supply fit and placement.
特長とメリット
- 12V/24V DC input: Works from a constant-voltage 12 VDC or 24 VDC supply with a 10-30 VDC input range.
- 10A max work current: Supports compatible low-voltage DC loads within the 10A max work current limit.
- DC wiring path: Separates Black to DC positive, White to DC negative, Red to Load positive, and Load negative back to DC negative.
- 5.8 GHz マイクロ波検知： 高周波ドップラー検知が動きを能動的に感知し、天井設置による照明の自動制御を実現します。
- Recessed ceiling form: Screw mount or spring clip mounting supports a low-profile ceiling installation with the documented 82-90 mm cutout.
- 360度 天井検知エリア： Ceiling placement gives broad room coverage with an 8-12 m detection diameter under RZ048 family conditions.
- 高/低感度設定: SENSボタンにより、ドア、ガラス、パーテーション、隣接するスペース越しによる誤検知を削減します。
- 機能・特徴
-
型番
RZ048-12V/24V
製品タイプ
Recessed ceiling-mounted microwave motion sensor switch
センサータイプ
高周波マイクロ波ドップラー（HF）
マイクロ波周波数
5.8 GHz ISMバンド
送信出力
0.4 mW
遅延時間
15秒、30秒、1分（デフォルト）、3分、5分、10分、30分
明暗センサーレベル
OFF、15 Lux、25 Lux（デフォルト）、35 Lux
感度
高または低
素材の透過性
ほとんどのプラスチック、ガラス、薄い仕切りを透過して検知（金属は検知を遮断）
- 電気仕様
-
Input voltage
12 VDC / 24 VDC (10-30 VDC)
Max work current
10A
Power supply type
Constant-voltage DC power supply
配線
Black to 12V/24VDC +; White to 12V/24VDC -; Red to Load +; Load – to 12V/24VDC –
- 検知および設置
-
検知直径
8-12 m
検知範囲
360度天井カバー
設置高さ
2.5〜5 m
動作温度
-10〜+40 C
動作湿度
< 93% RH（結露なきこと）
Mounting methods
Screw mount or spring clip mount
Ceiling cutout
82-90 mm circular hole for spring clip mounting
Face diameter
106 mm
Body diameter
78 mm
Height
64 mm overall; 25 mm lower visible section
金属からの離隔距離
大型の金属表面や高反射面から少なくとも1 m離してください。金属で完全に囲わないでください。
設置上の注意点
Avoid windows, doors, automatic doors, rotating equipment, HVAC airflow, fans, moving machinery, vibrating fixtures, and direct view to public corridors or outdoor areas
よくあるご質問
Is the RZ048 12V/24V model for AC line voltage?
No. This model is for a constant-voltage DC power supply. Use the RZ048-5A or RZ048-10A models for 100-265 VAC line-voltage applications.
What DC voltage does it use?
It uses 12 VDC / 24 VDC input with a 10-30 VDC input range.
How is the DC model wired?
Black connects to 12V/24VDC positive, White connects to 12V/24VDC negative, Red connects to Load positive, and Load negative returns to 12V/24VDC negative.
What is the max work current?
The low-voltage DC model uses a 10A max work current. Confirm the load and power supply before installation.
Does it use the same microwave sensing concept as the AC models?
Yes. It is positioned as the low-voltage DC version of the RZ048 recessed ceiling microwave sensor family, with the same 5.8 GHz microwave sensing concept and adjustable settings.
Can microwave sensing detect outside the intended area?
Yes. Microwave sensing can detect through many non-metal materials, so reduce sensitivity or relocate the sensor if doors, glass, partitions, or adjacent spaces cause nuisance triggering.
レビュー
レビューはまだありません。