Product video
RZ038-10A 360-Degree Recessed Ceiling PIR Motion Sensor Switch
$17.00
RZ038-10A is the higher-load AC version of the recessed ceiling PIR motion sensor switch for automatic lighting control.
It uses the same 360-degree ceiling PIR platform as the 5A model, with 100-265 VAC input, neutral-required AC wiring, and source-backed 10A load ratings for larger compatible lighting loads.
- 100-265 VAC line-voltage input, 10A model
- 360-degree PIR detection with 8-12 m detection diameter
- タイムディレイ：15秒〜30分
- 照度設定：オフ、15、25、または35 Lux
- Neutral wire required for AC wiring
製品の特長
- 10A AC model: 100-265 VAC recessed ceiling sensor switch with higher source-backed load ratings than the 5A model.
- Ceiling PIR coverage: 360-degree detection with 8-12 m detection diameter under manual conditions.
- 設置設定： タイムディレイ、照度閾値、および高/低感度をプッシュボタンで設定可能。
お探しの製品ではありませんか？ 製品ポートフォリオを見る：
専門家に相談する
Higher-Load AC Ceiling Sensing In A Recessed Form
The RZ038-10A is the higher-load AC model in the recessed RZ038 ceiling sensor family, built for automatic lighting control where a ceiling-mounted PIR switch is the right fit.
It keeps the same compact 360-degree sensing format while using 100-265 VAC live, neutral, and load wiring for projects that need the 10A load-rating profile.
Time Delay Control For Hallways And Shared Rooms
The time-delay button lets installers choose how long the load remains on after the last detected motion, from quick test timing through longer room-occupancy delays.
For hallways, stair areas, storage rooms, and shared indoor spaces, that setting helps the lighting stay on through normal movement and turn off after the area is vacant.
特長、メリット、仕様
The RZ038-10A pairs the recessed 360-degree PIR sensing platform with higher verified AC load ratings so installers can compare wiring, timer settings, and load fit.
特長とメリット
- 10A line-voltage control: Supports 100-265 VAC lighting circuits with the source-backed RZ038-10A load ratings shown in the specifications.
- Higher AC load profile: The 10A model is the RZ038 choice when the verified lighting load exceeds the 5A model rating.
- 360-degree PIR detection: Ceiling placement gives broad room coverage with an 8-12 m detection diameter when installed within the manual conditions.
- 調整可能な遅延時間: Choose 15 s, 30 s, 1 min, 3 min, 5 min, 10 min, or 30 min to match the room traffic pattern.
- 選択可能な照度（Lux）しきい値: Set Off, 15 Lux, 25 Lux, or 35 Lux to control whether motion can switch lights on when ambient light is present.
- Spring clip or screw mounting: Mount into an 82-90 mm ceiling cutout or secure to a ceiling/junction box using the documented methods.
- 機能・特徴
-
型番
RZ038-10A
製品タイプ
Recessed ceiling mount PIR motion sensor switch
センサータイプ
Passive infrared (PIR)
遅延時間
15秒、30秒、1分（デフォルト）、3分、5分、10分、30分
明暗センサーレベル
OFF、15 Lux、25 Lux（デフォルト）、35 Lux
感度
高または低
Power-up behavior
1-minute warm-up after power is turned on or restored
- 電気仕様
-
電源
100 VAC ~ 265 VAC
電源周波数
50/60 Hz
配線
白：中性線（Neutral）、赤：負荷側（Load）、黒：電圧線（Live）
白熱電球 / ハロゲン負荷
1000 W / 110 VAC; 2200 W / 220 VAC
蛍光灯 / 安定器 / LED負荷
500 W / 110 VAC; 1000 W / 220 VAC
- 検知および設置
-
検知直径
8-12 m when ambient temperature is below 27 C
検知範囲
360度天井カバー
Motion detection speed
0.6-1.5 m/s
設置高さ
2.5-3.5 m
動作温度
-10〜+40 C
動作湿度
< 93% RH
Ceiling cutout
82-90 mm circular hole for spring clip mounting
Face diameter
106 mm
よくあるご質問
How is the RZ038-10A different from the 5A model?
The 10A model has higher verified AC load ratings. Both use 100-265 VAC input, neutral-required wiring, and the same RZ038 recessed ceiling PIR sensing platform.
Does the RZ038-10A need a neutral wire?
はい。AC配線図に従い、白を中性線（Neutral）、赤を負荷（Load）、黒を電圧線（Live）に接続する必要があります。
What loads can the 10A model control?
The manual lists 1000 W / 110 VAC and 2200 W / 220 VAC for incandescent or halogen loads, and 500 W / 110 VAC and 1000 W / 220 VAC for fluorescent, ballast, or LED loads.
Can I adjust how long the lights stay on?
Yes. Time delay options are 15 s, 30 s, 1 min, 3 min, 5 min, 10 min, and 30 min.
Can the sensor respond only when the room is dark enough?
Yes. The Lux button supports Off, 15 Lux, 25 Lux, and 35 Lux settings.
What ceiling opening does the spring clip mount need?
The manual lists an 82-90 mm circular ceiling hole for spring clip mounting.
レビュー
レビューはまだありません。