What is Double Pole Light Switch
A double pole light switch is a type of switch designed to control two separate circuits, making it essentially two switches in one unit. This allows for the independent control of two different lights or groups of lights. The switch can be in the form of a rocker switch or an axial switch, with the button or rocker indicating the position of the switch (on or off).
您可能也會感興趣
- 吸頂式 PIR 人體感應器，配備乾觸點繼電器輸出
- 12/24VDC 或 12/24VAC 低電壓供電
- 用於 EMS、HVAC 和建築控制輸入的 COM、NO 和 NC 隔離繼電器觸點
- 低壓直流嵌入式天花安裝微波人體感應開關
- 12 VDC / 24 VDC 輸入，支援 10-30 VDC 範圍
- 最大工作電流 10A，配備可調節延時、光感閾值及靈敏度
- 高負載嵌入式天花安裝微波人體感應開關
- 100-265 VAC 市電輸入，10A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 嵌入式天花安裝微波人體感應開關
- 100-265 VAC 市電輸入，5A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 適用於 220V 電源的天花安裝 RZ037 PIR 被動式紅外線佔空感應調光開關
- 最大工作電流 3A，額定負載 660W
- LUX 按鈕控制光線感應器開關及用戶設定之調光亮度
- 適用於 110V 電源的天花安裝 RZ037 PIR 被動式紅外線佔空感應調光開關
- 最大工作電流 3A，額定負載 330W
- LUX 按鈕控制光線感應器開關及用戶設定之調光亮度
- 低壓直流天花安裝微波人體感應開關
- 12 VDC / 24 VDC 輸入，支援 10-30 VDC 範圍
- 最大工作電流 10A，配備可調節延時、光感閾值及靈敏度
- 高負載吸頂式微波動態感應器開關
- 100-265 VAC 市電輸入，10A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 吸頂式微波動態感應器開關
- 100-265 VAC 市電輸入，5A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 低壓直流嵌頂式 PIR 動態感應器開關
- 12 VDC / 24 VDC 輸入，支援 10-30 VDC 範圍
- 最大工作電流 10A，具備可調式時間延遲、光照度閾值及靈敏度
- 高負載嵌頂式 PIR 動態感應器開關
- 100-265 VAC 市電輸入，10A 型號
- 360度偵測，具備可調式時間延遲、光照度閾值及靈敏度
- 嵌頂式 PIR 動態感應器開關
- 100-265 VAC 市電輸入，5A 型號
- 360度偵測，具備可調式時間延遲、光照度閾值及靈敏度
- 用於室內開關照明控制的無線開關及接收器套裝
- 100-230VAC，50/60Hz 接收器，額定電流 5A
- CR2032 電池供電無線開關，採用 2.4GHz 通訊
- 佔用感應（自動開啟/自動關閉）
- 12–24V DC (10–30VDC)，最高 10A
- 360° 覆蓋，直徑 8–12 米
- 延遲時間 15 秒至 30 分鐘
- 光感應器 關閉/15/25/35 Lux
- 高/低靈敏度
- 自動開啟/自動關閉佔用模式
- 100–265V AC，10A（需接零線）
- 360° 全方位覆蓋；8–12 米偵測直徑
- 延遲時間 15 秒至 30 分鐘；Lux 關閉/15/25/35；靈敏度 高/低
- 自動開啟/自動關閉佔用模式
- 100–265V AC，5A（需接零線）
- 360° 全方位覆蓋；8–12 米偵測直徑
- 延遲時間 15 秒至 30 分鐘；Lux 關閉/15/25/35；靈敏度 高/低
- 100V-230VAC
- 傳輸距離：最遠 20 米
- 無線動態感應器
- 有線控制
A double pole light switch has the ability to handle heavier loads compared to a single pole switch. This makes it suitable for controlling appliances with high power requirements, such as cookers and showers. The wires used to connect the switch to the electrical circuit are typically larger in size to accommodate the higher voltage and current associated with double pole switches.
A double pole light switch also provides the important function of isolating appliances from the power source. When the switch is turned off, it completely cuts off the power supply to the connected appliance, ensuring safety during maintenance or repair work.
There are different types of double pole switches available, and their ratings should be checked to ensure compatibility with the specific appliance. For example, a 20A double pole switch may be suitable for smaller appliances, while larger appliances may require a 45A double pole switch.
正在尋找動態感應節能解決方案？
歡迎聯絡我們以獲取完整的 PIR 動態感應器、動態感應節能產品、動態感應器開關以及人體感應／無人感應商業解決方案。
常見問題
What Is a Double Pole Light Switch Used For
The double pole switch is specifically designed for household appliances that require a heavy electrical load, such as cookers, washing machines, ovens, and refrigerators.
How Do I Know if My Light Switch Is Single or Double Pole
It can be easily identified by the number of wires connected to it and in the gang box. A Single Pole/Single Throw light switch, which only controls the ON and OFF function of a light, typically has two screw terminals with the black Load/Line wires connected to it.
Can You Use Double Pole Switch for 120v
Double-pole switches are designed with two hot wires connected by a single neutral wire. This configuration allows for both poles to trip in the event of a short circuit on either hot wire. These switches can be utilized to power two independent 120-volt circuits or a single 240-volt circuit, such as the circuit for a central AC unit.
Can I Replace a Double Pole Switch With a Single Pole Switch
Yes, it is possible to replace a double pole switch with a single pole switch. The process involves using only one side of the double pole switch instead of both. Essentially, a double pole switch is essentially two single switches combined, allowing for control in two different locations.
