RZ048-5A 360-Degree Recessed Ceiling Microwave Motion Sensor Switch
RZ048-5A is a 100-265 VAC recessed ceiling microwave motion sensor switch for automatic indoor lighting control.
The 5A model uses high-frequency microwave Doppler sensing, neutral-required AC wiring, adjustable time delay, selectable Lux threshold, and high/low sensitivity in the RZ048 recessed ceiling form.
- Input tegangan saluran 100-265 VAC, model 5A
- Penginderaan gelombang mikro 5.8 GHz dengan cakupan 360 derajat
- Diameter deteksi 8-12 m dalam kondisi manual
- Penundaan waktu: 15 dtk hingga 30 mnt
- Pengaturan Lux: Mati, 15, 25, atau 35 Lux
Keunggulan produk
- Model AC 5A: 100-265 VAC recessed ceiling microwave sensor switch for verified RZ048-5A load ratings.
- Penginderaan gelombang mikro: Deteksi Doppler 5.8 GHz dengan cakupan langit-langit 360 derajat.
- Recessed mounting: Screw mount or spring clip mount with an 82-90 mm circular ceiling cutout.
Bukan apa yang Anda cari? Lihat portofolio kami:
Konsultasikan dengan Ahli
Pengiriman cepat: 99% dalam stok
Lini produk lengkap bertenaga sensor gerak
Tanyakan untuk pesanan massal ODM/OEM
5A Recessed Ceiling Microwave Sensing For Automatic Lighting
The RZ048-5A is a recessed ceiling-mounted microwave motion sensor switch for indoor automatic lighting control where a low-profile ceiling form is preferred over a wall switch.
Sensor ini menggunakan kabel fasa, netral, dan beban 100-265 VAC, dengan penyesuaian tombol tekan untuk penundaan waktu, ambang batas Lux, dan sensitivitas tinggi/rendah setelah pemasangan.
Cakupan Gelombang Mikro 360 Derajat Untuk Ruangan Sehari-hari
Pendeteksian Doppler gelombang mikro dapat mendeteksi gerakan melalui banyak bahan non-logam seperti kaca, plastik, dan sekat tipis, yang membantu penempatan di plafon mencakup tata letak ruang dalam yang praktis.
Karena sensitivitas yang sama juga dapat mendeteksi gerakan di luar area yang ditujukan, pemasang harus mengurangi sensitivitas atau memindahkan lokasi sensor saat pintu, jendela, sekat, permukaan logam, atau perlengkapan yang bergerak menyebabkan pemicuan yang mengganggu.
Fitur, Manfaat, Spesifikasi
The RZ048-5A combines 5A AC lighting control, recessed mounting, and 5.8 GHz microwave detection so installers can verify load fit, placement, and setup before ordering.
Fitur & Manfaat
- Kontrol tegangan saluran 5A: Supports 100-265 VAC lighting circuits with the source-backed RZ048-5A load ratings shown in the specifications.
- 5.8 GHz microwave sensing: High-frequency Doppler detection actively senses movement for ceiling-mounted automatic lighting control.
- Recessed ceiling form: Screw mount or spring clip mounting supports a low-profile ceiling installation with the documented 82-90 mm cutout.
- 360-degree ceiling coverage: Ceiling placement gives broad room coverage with an 8-12 m detection diameter under manual conditions.
- Non-metal material penetration: Microwave detection can pass through many plastics, glass, and thin partitions, while metal blocks detection.
- Adjustable time delay: Choose 15 s, 30 s, 1 min, 3 min, 5 min, 10 min, or 30 min to match room traffic patterns.
- Selectable Lux threshold: Set Off, 15 Lux, 25 Lux, or 35 Lux so the load responds to motion only when the ambient-light condition fits the installation.
- Fitur
-
Model
RZ048-5A
Product type
Sakelar sensor gerak gelombang mikro terpasang rata (recessed) pada langit-langit
Sensor type
High-frequency microwave Doppler (HF)
Microwave frequency
5.8 GHz ISM band
Transmission power
0.4 mW
Time delay
15 s, 30 s, 1 min (default), 3 min, 5 min, 10 min, 30 min
Light sensor level
Off, 15 Lux, 25 Lux (default), 35 Lux
Sensitivitas
High or Low
Material penetration
Detects through most plastics, glass, and thin partitions; metal blocks detection
- Electrical
-
Power source
100 VAC ~ 265 VAC
Power frequency
50/60 Hz
Pengkabelan
White to Neutral; Red to Load; Black to Live
Power consumption
0.5 W or less standby; 1 W operation
Incandescent / Halogen load
500 W / 110 VAC; 1100 W / 220 VAC
Fluorescent / Ballast / LED load
250 W / 110 VAC; 500 W / 220 VAC
- Detection & Installation
-
Detection diameter
8-12 m
Detection range
360-degree ceiling coverage
Installation height
2.5-5 m
Working temperature
-10 to +40 C
Working humidity
< 93% RH non-condensing
Mounting methods
Screw mount or spring clip mount
Ceiling cutout
82-90 mm circular hole for spring clip mounting
Face diameter
106 mm
Body diameter
78 mm
Height
64 mm overall; 25 mm lower visible section
Metal clearance
Keep at least 1 m from large metal or highly reflective surfaces; do not fully enclose in metal
Installation notes
Avoid windows, doors, automatic doors, rotating equipment, HVAC airflow, fans, moving machinery, vibrating fixtures, and direct view to public corridors or outdoor areas
FAQ
How is the RZ048-5A different from a PIR ceiling sensor?
RZ048 uses high-frequency microwave Doppler sensing. It can detect through many non-metal materials such as glass, plastic, and thin partitions, while metal blocks detection.
Does the RZ048-5A need a neutral wire?
Yes. The AC wiring diagram requires White to Neutral, Red to Load, and Black to Live.
What loads can the 5A model control?
The manual lists 500 W / 110 VAC and 1100 W / 220 VAC for incandescent or halogen loads, and 250 W / 110 VAC and 500 W / 220 VAC for fluorescent, ballast, or LED loads.
What ceiling opening does the spring clip mount need?
The manual lists an 82-90 mm circular ceiling hole for spring clip mounting.
Can microwave sensing trigger from outside the room?
Yes. The manual warns that microwave sensing can detect through glass, doors, or partitions, so sensitivity should be reduced or the sensor relocated if nuisance detection occurs.
Where should the RZ048 be installed?
The manual lists a 2.5-5 m installation height and recommends avoiding windows, doors, automatic doors, rotating equipment, HVAC airflow, fans, moving machinery, vibrating fixtures, and large metal surfaces.
Ulasan
Belum ada ulasan.