Détecteurs de mouvement sans fil

Sensor-and-receiver kits for flexible indoor lighting control

Accueil » Détecteurs de mouvement sans fil » Page 2

Détecteurs de mouvement sans fil

Rayzeek wireless motion sensors help add motion-based lighting control where the sensor should be placed away from the controlled load. Choose hardwired receiver kits, plug receiver kits, wall-switch kits, or low-voltage controller kits based on the load type, installation method, and control behavior required.

Wireless Sensor Plus Receiver Control

A wireless motion sensor kit separates detection from load control. The battery-powered sensor detects movement and sends a signal to a receiver or controller that switches the connected light or device.

RZ039 uses a wireless PIR sensor and a hardwired receiver at the light fixture; it is not a plug kit or an in-wall switch.

Match the Receiver to the Load

Plug kits control plug-in devices, hardwired receiver kits control fixtures, in-wall switch kits replace wall-switch control, and low-voltage kits control DC lighting. The right wireless sensor depends on what is being switched.

Choose by receiver type first, then by region, load rating, and desired occupancy or vacancy behavior.

Wireless Motion Sensor Kit Options

RZ039 wireless motion sensor kit with hardwired fixture receiver

RZ039 Wireless Sensor + Fixture Receiver Kit

RZ061-S wireless motion sensor plug kit

RZ061-S Motion Sensor Plug Kit

RZ062-S wireless motion sensor plug kit

RZ062-S Motion Sensor Plug Kit

RZ063 wireless motion sensor plug kit

RZ063 Motion Sensor Plug Kit

RZ064 wireless motion sensor plug kit

RZ064 Motion Sensor Plug Kit

RZ016 low voltage wireless motion sensor controller kit

RZ016 Low-Voltage Wireless Controller Kit

RZ016 low voltage wireless motion sensor kit with two sensors

RZ016 Two-Sensor Wireless Controller Kit

Wireless Motion Sensor Applications

Hardwired Fixture Control

Use RZ039 where a receiver can be wired at the fixture and the motion sensor needs flexible placement away from the switch box.

Plug-In Device Control

Use regional plug receiver kits where the controlled device plugs into an outlet and does not require fixture wiring.

Low-Voltage Lighting Control

Use wireless low-voltage controller kits for LED strip, cabinet, stair, and display lighting projects that use DC power.

What is a wireless motion sensor kit?

A wireless motion sensor kit separates motion detection from load control. A battery-powered sensor detects movement and sends a wireless signal to a receiver, controller, plug, or switch that controls the connected light or device.

What is RZ039 used for?

RZ039 is a wireless motion sensor lighting-control kit with a battery-powered sensor and a hardwired receiver connected at the light fixture. It is useful when the sensor needs flexible placement without running new switch wiring.

Is RZ039 a plug kit?

No. RZ039 is not a plug kit. Its receiver is hardwired to the light fixture. For plug-in device control, choose the appropriate RZ061, RZ062, RZ063, or RZ064 plug kit by region and load requirements.

Can wireless motion sensors support occupancy and vacancy behavior?

RZ039 supports occupancy mode for auto on/auto off and vacancy mode for manual on/auto off. Product behavior varies by kit, so choose the model that matches the desired control mode.

When should I use a wireless sensor instead of an in-wall motion switch?

Use a wireless sensor when the best detection position is not the switch box, when fixture receiver control is preferred, or when a plug or low-voltage controller kit better matches the load.

Are wireless motion sensor kits for indoor use?

Treat Rayzeek wireless motion sensor kits as indoor products unless a specific product rating or project requirement confirms another use.

Commercial Energy Saving Solutions

Private Office

Discover energy-saving solutions for private offices with Rayzeek’s sensor design guide. Learn how to meet energy code requirements while optimizing lighting control for efficiency and comfort.

Open Office

Uncover the power of automated lighting control in enhancing efficiency and reducing energy waste. Learn how to optimize lighting control for efficiency and comfort in your workspace.

Conference Room

Discover the energy-saving potential of your conference room with Rayzeek’s occupancy sensor design guide.

Classroom

Discover the energy-saving potential of classrooms with Rayzeek’s sensor design guide. Learn how to meet energy code requirements while creating a more efficient learning environment.

Restaurant

Explore the energy-saving design guide for restaurants, where efficient lighting control is key to creating a welcoming ambiance while reducing energy consumption.

Restroom

Explore our energy-saving guide for restrooms, designed to help you understand and implement occupancy sensor solutions for efficient lighting control in compliance with US Energy Codes.

Storage Room

Discover the energy-saving potential of storage rooms with Rayzeek’s occupancy sensor design guide.

Corridor

Discover the energy-saving potential of corridors with Rayzeek’s sensor design guide. Uncover the power of automated lighting control in your commercial building’s passageways.

Lobby

Discover the energy-saving potential of your lobby. Learn how to meet energy codes and reduce energy waste with our tailored solutions.

Learn about Wireless Motion Sensors

Motion Sensors vs Presence Sensors
Motion sensors and presence sensors both have their unique functionalities and applications, but how do they differ? And more importantly, which one is the right choice for your specific needs?
Read More
What is a PIR Motion Sensor and How Does it Work?
Are you curious about how those automatic lights turn on as soon as you enter a room? Or maybe you’ve wondered how security systems detect movement and trigger alarms?
Read More
The Definitive Motion Sensor Buyer Guide
A motion sensor is essential in lighting energy-saving and security systems, the sensors will activate the connected lights or cameras only when they detect a motion.
Read More

French