What is Load Wire
In a light switch, load wire refers to the wire that carries electricity from the switch to the light fixture or device. This wire is responsible for delivering power to the load when the switch is turned on. It is important to note that the load wire is distinct from the line wire, which carries power from the source to the switch.
When the switch is in the on position, the load wire enables the flow of electricity to the light fixture, allowing it to be powered. Conversely, when the switch is turned off, the load wire interrupts the power supply, resulting in the light being turned off.
正在尋找動態感應節能解決方案？
歡迎聯絡我們以獲取完整的 PIR 動態感應器、動態感應節能產品、動態感應器開關以及人體感應／無人感應商業解決方案。
In the context of a series of outlets wired in sequence, the load wire plays a crucial role. It is the wire that feeds electricity from the first outlet to the remaining outlets on the same line. This ensures that power is distributed to all the outlets in the circuit.
Identifying the load wire is essential when working with electrical components to ensure proper installation and operation. It is typically connected to the switch along with the wire that goes from the switch to the lights. The load wire is commonly colored black, although it may vary depending on the country or the specific wiring configuration, such as in the case of a three-way switch.
您可能也會感興趣
- 吸頂式 PIR 人體感應器，配備乾觸點繼電器輸出
- 12/24VDC 或 12/24VAC 低電壓供電
- 用於 EMS、HVAC 和建築控制輸入的 COM、NO 和 NC 隔離繼電器觸點
- 低壓直流嵌入式天花安裝微波人體感應開關
- 12 VDC / 24 VDC 輸入，支援 10-30 VDC 範圍
- 最大工作電流 10A，配備可調節延時、光感閾值及靈敏度
- 高負載嵌入式天花安裝微波人體感應開關
- 100-265 VAC 市電輸入，10A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 嵌入式天花安裝微波人體感應開關
- 100-265 VAC 市電輸入，5A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 適用於 220V 電源的天花安裝 RZ037 PIR 被動式紅外線佔空感應調光開關
- 最大工作電流 3A，額定負載 660W
- LUX 按鈕控制光線感應器開關及用戶設定之調光亮度
- 適用於 110V 電源的天花安裝 RZ037 PIR 被動式紅外線佔空感應調光開關
- 最大工作電流 3A，額定負載 330W
- LUX 按鈕控制光線感應器開關及用戶設定之調光亮度
- 低壓直流天花安裝微波人體感應開關
- 12 VDC / 24 VDC 輸入，支援 10-30 VDC 範圍
- 最大工作電流 10A，配備可調節延時、光感閾值及靈敏度
- 高負載吸頂式微波動態感應器開關
- 100-265 VAC 市電輸入，10A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 吸頂式微波動態感應器開關
- 100-265 VAC 市電輸入，5A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 低壓直流嵌頂式 PIR 動態感應器開關
- 12 VDC / 24 VDC 輸入，支援 10-30 VDC 範圍
- 最大工作電流 10A，具備可調式時間延遲、光照度閾值及靈敏度
- 高負載嵌頂式 PIR 動態感應器開關
- 100-265 VAC 市電輸入，10A 型號
- 360度偵測，具備可調式時間延遲、光照度閾值及靈敏度
- 嵌頂式 PIR 動態感應器開關
- 100-265 VAC 市電輸入，5A 型號
- 360度偵測，具備可調式時間延遲、光照度閾值及靈敏度
- 用於室內開關照明控制的無線開關及接收器套裝
- 100-230VAC，50/60Hz 接收器，額定電流 5A
- CR2032 電池供電無線開關，採用 2.4GHz 通訊
- 佔用感應（自動開啟/自動關閉）
- 12–24V DC (10–30VDC)，最高 10A
- 360° 覆蓋，直徑 8–12 米
- 延遲時間 15 秒至 30 分鐘
- 光感應器 關閉/15/25/35 Lux
- 高/低靈敏度
- 自動開啟/自動關閉佔用模式
- 100–265V AC，10A（需接零線）
- 360° 全方位覆蓋；8–12 米偵測直徑
- 延遲時間 15 秒至 30 分鐘；Lux 關閉/15/25/35；靈敏度 高/低
- 自動開啟/自動關閉佔用模式
- 100–265V AC，5A（需接零線）
- 360° 全方位覆蓋；8–12 米偵測直徑
- 延遲時間 15 秒至 30 分鐘；Lux 關閉/15/25/35；靈敏度 高/低
- 100V-230VAC
- 傳輸距離：最遠 20 米
- 無線動態感應器
- 有線控制
常見問題
Does It Matter Which Wire Goes Where on a Light Switch
It is not important which wire goes where on a light switch because the switch terminals can be interchanged.
How Do You Tell Which Wire Is Hot When Both Are Black
Use a test lamp, which is essentially a light bulb with two wires extending from the holder. To determine which wire is hot when both are black, simply connect one lamp wire to one of the black wires and the other lamp wire to the ground wire. If the bulb illuminates, it indicates that the wire is hot.
What Happens if You Mix Up Hot and Neutral Wires on Light Fixture
If you mistakenly swap the hot and neutral wires, the circuit will not function properly. The light or appliance will fail to turn on, and there is a possibility of tripping a circuit breaker.
Which Wire Is Load and Which Is Line
In the electrical industry, the terms “line” and “load” are commonly used to distinguish between the wires that transmit power from the source to a device (line) and the wires that carry power to other devices along the circuit (load).
What Is the Difference Between a Live Wire and a Load Wire
Line wires are constantly carrying electricity, making them live at all times. On the other hand, load wires are only live when they are connected to an active outlet or switch. This means that load wires are only carrying electricity when they are in use. In most homes, there are two hot wires (line wires) and one neutral wire (load wire). The hot wires are typically colored black or red, while the neutral wire is colored white.
Do All Light Switches Have a Load Wire
A load wire is necessary for a switch to function properly and control the on and off functions. In the case of 3-way switches, it is common for the white wire to be used as a current carrier. To distinguish it as potentially hot, the white wire may have a black mark or black tape on it.
Is Load Wire Same as Neutral
Load wires and neutral wires serve different purposes in an electrical system. Load wires are responsible for delivering power directly to the controlled appliance or device, while neutral wires carry the return current back to the control from the load. Line wires, on the other hand, originate from the source, such as a transformer, substation, or power plant. Therefore, load wires and neutral wires are not the same.
