What is Anchor Light
An anchor light, also known as an all-round light, is a specific type of light used on boats or ships to indicate their position or location when anchored or tied to a mooring. It is typically a visible white light that provides 360-degree, unbroken visibility to other vessels in the vicinity. The anchor light is required to be displayed from dusk to dawn, ensuring safety during nighttime operations.
The anchor light serves as an essential safety feature, allowing other boats to identify the presence and location of an anchored vessel in the dark. It helps prevent collisions and ensures compliance with maritime regulations. The light should be positioned at the highest point of the vessel, such as the top of the mast, to ensure it is not obstructed by any person or object.
從 Rayzeek 動態感測器產品組合中獲得靈感。
找不到您想要的產品？別擔心。總有其他方法可以解決您的問題。也許我們的其中一個產品組合可以幫到您。
LED anchor lights are commonly used due to their energy efficiency and long lifespan. They minimize battery drain and provide reliable illumination. By opting for LED anchor lights, boat owners can meet safety requirements while conserving power.
您可能也會感興趣
- 吸頂式 PIR 人體感應器，配備乾觸點繼電器輸出
- 12/24VDC 或 12/24VAC 低電壓供電
- 用於 EMS、HVAC 和建築控制輸入的 COM、NO 和 NC 隔離繼電器觸點
- 低壓直流嵌入式天花安裝微波人體感應開關
- 12 VDC / 24 VDC 輸入，支援 10-30 VDC 範圍
- 最大工作電流 10A，配備可調節延時、光感閾值及靈敏度
- 高負載嵌入式天花安裝微波人體感應開關
- 100-265 VAC 市電輸入，10A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 嵌入式天花安裝微波人體感應開關
- 100-265 VAC 市電輸入，5A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 適用於 220V 電源的天花安裝 RZ037 PIR 被動式紅外線佔空感應調光開關
- 最大工作電流 3A，額定負載 660W
- LUX 按鈕控制光線感應器開關及用戶設定之調光亮度
- 適用於 110V 電源的天花安裝 RZ037 PIR 被動式紅外線佔空感應調光開關
- 最大工作電流 3A，額定負載 330W
- LUX 按鈕控制光線感應器開關及用戶設定之調光亮度
- 低壓直流天花安裝微波人體感應開關
- 12 VDC / 24 VDC 輸入，支援 10-30 VDC 範圍
- 最大工作電流 10A，配備可調節延時、光感閾值及靈敏度
- 高負載吸頂式微波動態感應器開關
- 100-265 VAC 市電輸入，10A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 吸頂式微波動態感應器開關
- 100-265 VAC 市電輸入，5A 型號
- 5.8 GHz 微波感應，配備可調節延時、光感閾值及靈敏度
- 低壓直流嵌頂式 PIR 動態感應器開關
- 12 VDC / 24 VDC 輸入，支援 10-30 VDC 範圍
- 最大工作電流 10A，具備可調式時間延遲、光照度閾值及靈敏度
- 高負載嵌頂式 PIR 動態感應器開關
- 100-265 VAC 市電輸入，10A 型號
- 360度偵測，具備可調式時間延遲、光照度閾值及靈敏度
- 嵌頂式 PIR 動態感應器開關
- 100-265 VAC 市電輸入，5A 型號
- 360度偵測，具備可調式時間延遲、光照度閾值及靈敏度
- 用於室內開關照明控制的無線開關及接收器套裝
- 100-230VAC，50/60Hz 接收器，額定電流 5A
- CR2032 電池供電無線開關，採用 2.4GHz 通訊
- 佔用感應（自動開啟/自動關閉）
- 12–24V DC (10–30VDC)，最高 10A
- 360° 覆蓋，直徑 8–12 米
- 延遲時間 15 秒至 30 分鐘
- 光感應器 關閉/15/25/35 Lux
- 高/低靈敏度
- 自動開啟/自動關閉佔用模式
- 100–265V AC，10A（需接零線）
- 360° 全方位覆蓋；8–12 米偵測直徑
- 延遲時間 15 秒至 30 分鐘；Lux 關閉/15/25/35；靈敏度 高/低
- 自動開啟/自動關閉佔用模式
- 100–265V AC，5A（需接零線）
- 360° 全方位覆蓋；8–12 米偵測直徑
- 延遲時間 15 秒至 30 分鐘；Lux 關閉/15/25/35；靈敏度 高/低
- 100V-230VAC
- 傳輸距離：最遠 20 米
- 無線動態感應器
- 有線控制
常見問題
What Is an Anchor Light
An anchor light is a type of light used in nautical settings. It is a 32-point light that is visible from a distance of at least two miles. This light is typically shown at night near the bow of a vessel that is at anchor. It is important that the light is not positioned more than 20 feet (6 meters) above the deck of the vessel.
When Should Anchor Light Be On
All boats that are anchored should display an all-around white light that is visible for a minimum distance of two nautical miles.
How High Should My Anchor Light Be
For boats of this size, it is recommended to position the all-around white light at a minimum height of 39 inches above the sidelights.
Do You Run With the Anchor Light On
When running with the anchor light on, you should have the red, green, and white all around light illuminated. However, when anchored, only the all around light should be on.
What Lights Should Be on a Boat at Night
The necessary lights for a boat at night are red and green sidelights that can be seen from a minimum distance of one mile on a dark, clear night. Additionally, the boat should have either an all-round white light or both a masthead light and a sternlight. These lights must be visible from a minimum distance of two miles on a dark, clear night.
