Kit: Ceiling Occupancy Sensor + Wireless Motion Sensor Wall Switch

RZ036A: Occupancy Sensor Switch

The RZ036A motion detectors are equipped with an integrated wireless module, incorporate wireless technology and motion sensing capabilities for wireless communication and motion sensing capabilities. When paired with the RZ023WG wireless sensor, these two devices work in tandem to provide an extended range for motion detection, ensuring reliable lighting control. Particularly useful in narrow corridors, stairs and some large spaces.

Pairing

Transmitter(RZ023WG): the device powered by battery

Receiver(RZ036A): the device connected to mains power

Add New Pairings

• To prevent battery interference, firstly remove the battery from the transmitter or turn it back to people, there should be no other transmitters working nearby.
• Press and hold the big button of the receiver, the red indicator will flash 1-6 times, and then release the big button after the indicator light stays on, new parings can be added at least 10 sets.
• Install the battery on the transmitter and wait for 2-3 seconds, short press the big button of the transmitter, the learning will be successful after the indicator light flashes and goes out.

Delete Existing Pairings

• To prevent battery interference, firstly remove the battery from the transmitter or turn it back to people, there should be no other transmitters working nearby.
• Press and hold the small button of the receiver, the red indicator flash 1-3 times, and then release the small button after the indicator light stays on, it will erase the existing pairings.
• Install the battery on the transmitter and wait for 2-3 seconds, short press the big button of the transmitter, the learning will be successful after the indicator light flashes and goes out36