점유/부재/수동 동작 감지 센서 스위치, 중성선 필요, UL 인증
$18.00
RZ021-10A-N 동작 감지 센서 스위치, 120V, 10A. 미국 1구 스위치 박스 직접 교체형. 중성선 필요. 정확한 동작 감지를 위한 고급 PIR 동작 감지 센서. Rayzeek 전용 수동 ON/OFF 모드가 포함된 점유/부재 모드.
Rayzeek의 수동 ON/OFF 모드를 통해 사용자는 일반 벽 스위치처럼 부하를 항상 ON 또는 OFF 상태로 유지할 수 있습니다. 패널의 버튼을 누르기만 하면 설정을 유지한 채 점유/부재 모드에서 수동 모드로, 또는 그 반대로 전환할 수 있습니다. 이 기능을 통해 사용자는 부하를 영구적으로 수동 제어할 수 있으며 필요할 때 동작 감지 모드를 무시하고 직접 제어할 수 있습니다.
또한 이 동작 감지 센서 조명 스위치는 사용자가 현재 감지 모드를 이탈하지 않고도 조명을 임시로 켜거나 끌 수 있으며, 15초에서 30분까지 6단계 시간 지연 조절 및 OFF, 15 lux, 35 lux의 3단계 광센서 조절을 지원합니다. RZ021-10A-N은 최고의 유연성을 제공하며 모든 주거 및 상업용 환경에 완벽하게 대응합니다.
- 센서 모드: 점유, 부재 및 수동 모드.
- 센서: PIR 동작 감지 센서. 광센서(조도센서).
- 주요 기능: 조절 가능한 시간 지연 및 광센서.
- 배선: 하트선(Hot), 활선(Live), 중성선(Neutral), 접지선(Ground).
- 사용처: 거실, 욕실, 사무실. ON/OFF 모드 기능 덕분에 일반 단극 조명 스위치가 사용되는 모든 곳.
제품 주요 특징
- 수동 모드를 사용하면 스위치가 일반 조명 스위치와 동일하게 작동합니다.
- 120V 선로 전압, 10A 정격 전류
- 중성선 필요.
- 점유, 부재, 수동 제어 3-in-1
- UL 인증
찾으시는 제품이 아닌가요? 제품 포트폴리오 보기:
전문가 상담
동작 감지 스위치
It’s never too late to experience convenient, energy-saving, and hands-free motion-activated lighting. Easily save up to 60% of energy and reduce your electricity bills with a simple upgrade to motion sensor light switches.
The versatile RZ021 motion sensor switch is applicable for every residential and commercial application with occupancy, vacancy, and ON/OFF modes integrated for max compatibility, flexibility, and ease of use.
10 Minute Quick Installation
The RZ021-10A-N series is designed for the US markets for single-pole applications. The 120V voltage range works well in homes and offices and the 10A current rating is competent for daily uses.
RZ021-10A-N is a 4-wire switch and requires a neutral wire to work.
Exclusive ON/OFF Mode
One significant drawback after upgrading to motion-activated light switches is that you partially lose the ability to manually control your lights. It’s not possible to keep the lights ON like you’re used to with the good old wall switch.
The Best Of Both Worlds?
Rayzeek introduces the exclusive ON/OFF mode, allowing users to permanently keep the load ON or OFF the same as a standard light switch. It’s so convenient that users can seamlessly switch between detection mode and manual mode with only one tap.
Say goodbye to all these real-life headaches.
Pets Activate the Light at Night
Dogs and cats are active at night and might frequently trigger your motion light to turn on. That’s their nature. While most motion sensor switches do not have pet-immune features, false positives at night can be a real headache.
Select vacancy or OFF mode, especially in laundry rooms or the kitchen where your pets usually play around.
Take a Relaxing Long Bath
On average, people spend at least 8 minutes in the shower. When taking a relaxing bath at night, the light might unexpectedly turn off if the sensor can’t detect your presence in the bathing area. It can be an unpleasant experience that spoils the mood
Enter ON mode to keep the light always ON during the shower. Enjoy your hot and relaxing bath for as long as your like.
Lighting in Your Kids’ Bedroom
A vacancy sensor switch is used in bedrooms to reduce the electricity waste from the lighting left on by forgetful kids. Occupancy sensors aren’t suitable because they might activate the light at night, waking up kids, but it’s still handier in the daytime.
Now you can use occupancy sensor mode in your kid’s bedroom for the whole day. When it’s bedtime, touch the OFF button to keep the light off for the whole night.
Light False on in Empty Spaces
A fixed heat source(HVAC or hot wind) or even mirror reflection may send false positive IR signals that keep the light on when the space is unoccupied. Most of the time, it’s impossible to relocate the sensor’s position or the heat source as they’re fixed.
When the PIR sensor constantly detects signals and is falsely triggered, select OFF Mode to bypass motion detection
False off With People in the Room
Lights might falsely turn off if the sensor fails to detect the presence of people, e.g., the room is large, has obstacles blocking the IR signal, or fine motion activities such as reading or typing. It’s frustrating to repeatedly re-activate lights by moving your body.
When we need to permanently keep the light ON, enter ON mode by tapping the small button and exit without losing previous settings.
Features, Benefits, Specs
The ultimate energy-saving & lighting automation solution – switch from Auto ON/Auto OFF, Manal ON/Auto OFF, and Manal ON/Manual OFF operating mode for your multi-purpose room.
Features & Benefits
- Occupancy, Vacancy, Manual ON/OFF mode 3 in 1
- Exclusive ON/OFF mode allows the sensor switch to work the same as a standard light switch
- Time delay options: 15s, 1 min, 3 mins, 5 mins, 15 mins, 30 mins
- Enable ambient light sensor to keep lights off when there is ample natural light
- Low and high sensitivity adjustable
- Adjust settings by tapping buttons without removing the switch plate
- Magnetic latching relay provides better performance
- Made of fire-resistant materials for your safety
- RoHS, CE, FCC, UL certified
- 주요 기능
Sensor Mode
Vacancy mode, Occupancy mode, Manual ON/OFF mode
Time-Delay
15 s, 1 min (default), 3 mins, 5 mins, 15 mins, 30 mins
조도 센서
Off, 15 Lux, 25 Lux (default), 35 Lux
Sensor Sensitivity
Low Sensitivity, High Sensitivity
- Working Conditions
Power Source
120 VAC
Power Frequency
50 / 60Hz
Installation Height
1.2 m ~ 1.6 m
Working Humidity
< 93%RH
Working Temperature
-20 ~ +40℃
- Detection Capability
Detection Distance
7 m ~ 9 m (<27℃)
Detection Range
< 150°
Detection Speed
0.6 ~ 1.5m/s
- Bulb Compatibility
Resistive / Tungsten
120Vac, 50/60Hz, 10.0A
Standard Ballast
120Vac, 50/60Hz, 5.5A
Electronic Ballast / LED
120Vac, 50/60Hz, 5.0A
Motor
120 Vac, 50/60Hz, 1/6 HP
The Ideal Repalcement
The Rayzeek RZ021 motion sensor switch is the ideal motion-activated wall switch solution for the US market. It can fit in the US standard One-Gang switch box and replace your current light switch within minutes. The 120V wide voltage range makes RZ021 applicable for home and commercial applications. Both “Neutral Required” and “No Neutral” versions are available for new installations and old house retrofit projects.
RZ021-10A-N
- 10A Load: Ideal for high load applications, i,e, controlling multiple lights or HVAC
- Neutral Required: Hot Wire, Load Wire, Neutral Wire, Ground Wire
US Standard Switch
RZ021 motion sensor switch fits in the “Single Gang” or “One Gang” electrical switch box and can replace standard light switches in the US market. Also suitable for countries using the US standard switch boxes:
- United States
- Canada
- Argentina
- Australia
- Japan
- Mexico
- New Zealand
- Central America
Versatile Applications
Rayzeek RZ021 motion sensor switch is the ultimate solution for automating your home lighting. It can act as an occupancy sensor, vacancy sensor, or a standard light switch to suit the diverse needs of every space. Simply upgrade all your light switches with RZ021 without a second thought because you can always change it to a manual ON/OFF switch when needed.
Bathroom
Occupancy sensor with light sensor enabled is the ideal mode for bathroom usage, especially when you need to use it at night. Manual ON mode can be suitable for long showers.
Garage
Walk in and out of your home garage without the need to reach the light switch with an occupancy sensor switch. Enable daylight sensing to save more energy in the daytime.
Laundry Room
Enjoy the automatic lighting turned on and off for you when arm-full with piles of laundry to wash or clean clothes to take away.
Kitchen
Place an occupancy sensor switch at the entrance and enjoy the automatic lighting while you’re busy cooking and preparing food for your family.
Hallway
Occupancy/vacancy sensor switches can reduce the hours of lighting used by approximately 53% on dark hallways in your basement.
Breakroom
Occupancy sensors can reduce energy waste by 39% and increase energy-saving up to 17% with a 20-minute time delay for breakrooms.
개인 사무실
Rayzeek motion sensor switches provide max flexibility for office use cases. Occurpnay, vacancy or manual mode, your office, your call.
회의실
Vacancy switch with manual override feature is perfect for conference rooms where it’s not frequently used and requires manual turn on and off for presentations.
동영상
RZ021 올인원 동작 감지 센서 스위치
RZ021 사용자 가이드
RZ021 프로그래밍 가이드
RZ021-G (중성선 미필요) – 설치 동영상
RZ021-N (중성선 필요) – 설치 동영상
Fire Resistance Testing – RZ021
Load Testing
자료실
관심 상품…
-
점유 / 공실 / 수동 동체 감지 센서 스위치, 중성선 미필요, UL 인증
RZ021-5A-G- 점유(Occupancy), 공실(Vacancy), ON/OFF 모드
- 120V, 5A
- 접지선(Ground Wire) 필요
- 미국 표준 1구(1-Gang) 벽면 박스 호환
-
Ceiling Mount Line Voltage Occupancy Motion Sensor
RZ036-10A- 점유 모드(Occupancy mode)
- 100~265V, 10A
- 중성선(Neutral Wire) 필요
- 1600 sq ft
-
Occupancy / Vacancy / Manual Motion Sensor Switch, Neutral Required, UK
RZ023-5A- 점유(Occupancy), 공실(Vacancy), ON/OFF 모드
- 100~265V, 5A
- 중성선(Neutral Wire) 필요
- Fits the UK square pattress box
-
Occupancy / Vacancy / Manual Motion Sensor Switch, Neutral Required, EU
RZ022-5A- 점유(Occupancy), 공실(Vacancy), ON/OFF 모드
- 100~265V, 5A
- 중성선(Neutral Wire) 필요
- Fits the European round backbox
상품평
아직 상품평이 없습니다.