블로그

What is Cutoff Distribution

Horace He

최종 수정일: 2023년 12월 26일

What is Cutoff Distribution

Cutoff distribution, in the context of the lighting industry, refers to a classification system that regulates the light distribution from a luminaire. It is designed to control the amount of glare produced by a luminaire, particularly at specific vertical angles, in order to enhance the comfort and safety of drivers. The cutoff distribution classification system categorizes luminaires based on the intensity of light emitted at certain vertical angles. There are different categories within this classification, each with specific criteria for intensity limitation.

The first category is the Non-Cutoff distribution, which refers to a luminaire light distribution without any intensity limitation. In other words, there are no restrictions on the amount of light emitted at any vertical angle.

관심 있는 다른 제품

  • 무전압 접점 리레이 출력을 갖춘 천장 설치형 PIR 재실 감지 센서
  • 12/24VDC 또는 12/24VAC 저전압 전원 공급
  • EMS, HVAC 및 빌딩 제어 입력을 위한 COM, NO 및 NC 절연 리레이 접점
RZ048 매립형 천장 마이크로웨이브 동작 감지 센서 제품 이미지
  • 저전압 DC 매립형 천장 설치형 마이크로웨이브 모션 센서 스위치
  • 10-30 VDC 범위를 지원하는 12 VDC / 24 VDC 입력
  • 조절 가능한 지연 시간, Lux 임계값 및 감도 기능을 갖춘 최대 10A 동작 전류
RZ048 매립형 천장 마이크로웨이브 동작 감지 센서 제품 이미지
  • 고부하용 매립형 천장 설치형 마이크로웨이브 모션 센서 스위치
  • 100-265 VAC 라인 전압 입력, 10A 모델
  • 조절 가능한 지연 시간, Lux 임계값 및 감도를 갖춘 5.8 GHz 마이크로웨이브 감지
RZ048 매립형 천장 마이크로웨이브 동작 감지 센서 제품 이미지
  • 천장 매립형 마이크로웨이브 동작 감지 센서 스위치
  • 100-265 VAC 라인 전압 입력, 5A 모델
  • 조절 가능한 지연 시간, Lux 임계값 및 감도를 갖춘 5.8 GHz 마이크로웨이브 감지
  • 220V 전원용 천장 부착형 RZ037 PIR 재실 감지 센서 디머
  • 660W 정격 부하 및 최대 동작 전류 3A
  • LUX 버튼으로 조도 센서 ON/OFF 및 사용자 설정 디밍 밝기 제어
  • 110V 전원용 천장 부착형 RZ037 PIR 재실 감지 디머 스위치
  • 330W 정격 부하 및 최대 동작 전류 3A
  • LUX 버튼으로 조도 센서 ON/OFF 및 사용자 설정 디밍 밝기 제어
RZ047 천장 장착형 마이크로웨이브 동작 감지 센서 스위치
  • 저전압 DC 천장 부착형 마이크로웨이브 동작 감지 센서 스위치
  • 10-30 VDC 범위를 지원하는 12 VDC / 24 VDC 입력
  • 조절 가능한 지연 시간, Lux 임계값 및 감도 기능을 갖춘 최대 10A 동작 전류
RZ047 천장 장착형 마이크로웨이브 동작 감지 센서 스위치
  • 고부하용 천장 부착형 마이크로웨이브 동작 감지 센서 스위치
  • 100-265 VAC 라인 전압 입력, 10A 모델
  • 조절 가능한 지연 시간, Lux 임계값 및 감도를 갖춘 5.8 GHz 마이크로웨이브 감지
RZ047 천장 장착형 마이크로웨이브 동작 감지 센서 스위치
  • 천장 부착형 마이크로웨이브 동작 감지 센서 스위치
  • 100-265 VAC 라인 전압 입력, 5A 모델
  • 조절 가능한 지연 시간, Lux 임계값 및 감도를 갖춘 5.8 GHz 마이크로웨이브 감지
RZ038 매립형 천장 PIR 동작 감지 센서 상면 및 측면도
  • 저전압 DC 매립형 천장 PIR 동작 감지 센서 스위치
  • 10-30 VDC 범위를 지원하는 12 VDC / 24 VDC 입력
  • 시간 지연, 조도 임계값, 감도 조절이 가능한 최대 동작 전류 10A 제품
RZ038 매립형 천장 PIR 동작 감지 센서 정면도
  • 고부하용 매립형 천장 PIR 동작 감지 센서 스위치
  • 100-265 VAC 라인 전압 입력, 10A 모델
  • 시간 지연, 조도 임계값, 감도 조절이 가능한 360도 감지
RZ038 매립형 천장 PIR 동작 감지 센서 정면도
  • 매립형 천장 PIR 동작 감지 센서 스위치
  • 100-265 VAC 라인 전압 입력, 5A 모델
  • 시간 지연, 조도 임계값, 감도 조절이 가능한 360도 감지
RZ040 무선 스위치 및 수신기 키트
  • 실내 ON/OFF 조명 제어용 무선 스위치 및 수신기 키트
  • 정격 전류 5A의 100-230VAC, 50/60Hz 수신기
  • 2.4GHz 통신 방식의 CR2032 배터리 구동 무선 스위치
  • 재실 모드(자동 ON/자동 OFF)
  • 12–24V DC (10–30VDC), 최대 10A
  • 360° 감지 범주, 직경 8–12m
  • 시간 지연 15초–30분
  • 조도 센서 Off/15/25/35 Lux
  • 높음/낮음 감도
  • 자동 ON/자동 OFF 재실 모드
  • 100–265V AC, 10A (중성선 필요)
  • 360° 감지 범위; 감지 직경 8–12m
  • 시간 지연 15초–30분; 조도 OFF/15/25/35; 감도 높음/낮음
  • 자동 ON/자동 OFF 재실 모드
  • 100–265V AC, 5A (중성선 필요)
  • 360° 감지 범위; 감지 직경 8–12m
  • 시간 지연 15초–30분; 조도 OFF/15/25/35; 감도 높음/낮음
  • 100V-230VAC
  • 전송 거리: 최대 20m
  • 무선 동작 감지 센서
  • 유선 제어

The second category is the Semi-Cutoff distribution, where the intensity of light does not exceed 20% of the rated light at 80 degrees vertical angle from above nadir. Additionally, the intensity must not exceed 5% of the rated light lumens at 90 degrees from nadir. This limitation applies to all lateral angles around the luminaire.

The third category is the Cutoff distribution, where the intensity of light does not exceed 2.5% at or above 90 degrees of the rated lamp lumens from nadir. Additionally, the intensity must be less than 10% of the rated light lumens at 80 degrees vertical angle above nadir.

The fourth and most restrictive category is the Full Cutoff distribution, where the intensity of light is zero above 90 degrees from nadir. This means that the light emitted by the luminaire will only hit the ground below. Additionally, the intensity must not exceed 10% of the rated light lumens at or above 80 degrees. Similar to the semi-cutoff classification, this limitation applies to all lateral angles around the luminaire.

By implementing the cutoff distribution classification, the lighting industry aims to minimize glare and light pollution by directing the light downward and preventing excessive light emission at specific angles. This helps to create a more comfortable and safer lighting environment, particularly for drivers on roadways.

동작 감지 기반의 에너지 절감 솔루션을 찾고 계십니까?

PIR 동작 감지 센서, 동작 감지 에너지 절감 제품, 동작 감지 센서 스위치, 상업용 점유/부재(Occupancy/Vacancy) 감지 솔루션에 대해 문의해 주시기 바랍니다.

댓글 남기기

Korean