RZ048-10A 360도 매립형 천장 마이크로웨이브 모션 센서 스위치
RZ048-10A is the higher-load AC version of the recessed ceiling microwave motion sensor switch for automatic lighting control.
It keeps the same 5.8 GHz microwave sensing and recessed RZ048 ceiling form as the 5A model while using source-backed 10A load ratings for compatible 100-265 VAC lighting circuits.
- 100-265 VAC 라인 전압 입력, 10A 모델
- 360도 범위를 감지하는 5.8 GHz 마이크로웨이브 감지
- 수동 조건에서 8-12 m 감지 지름
- 시간 지연: 15초~30분
- Lux 설정: Off, 15, 25 또는 35 Lux
제품 주요 특징
- 10A AC model: 100-265 VAC recessed ceiling microwave sensor switch with higher source-backed load ratings than the 5A model.
- 마이크로웨이브 감지: 360도 천장 감지 범위를 제공하는 5.8 GHz 도플러 감지.
- Recessed mounting: Screw mount or spring clip mount with an 82-90 mm circular ceiling cutout.
찾으시는 제품이 아닌가요? 제품 포트폴리오 보기:
전문가 상담
Higher-Load AC Microwave Control In A Recessed Ceiling Form
The RZ048-10A is the higher-load AC model in the RZ048 recessed ceiling microwave sensor family, built for automatic lighting control where a ceiling sensor is the right detection position.
It uses 100-265 VAC live, neutral, and load wiring, with manual adjustment for time delay, Lux threshold, and high/low sensitivity after installation.
Higher-Load AC Sensing For Shared Indoor Lighting
Use the RZ048-10A when the project needs the recessed RZ048 microwave sensing platform and the higher verified AC load profile shown in the manual.
Ceiling placement can suit corridors, shared rooms, utility areas, and similar indoor spaces, provided the sensor is positioned to avoid unwanted detection through doors, windows, partitions, metal surfaces, or moving equipment.
기능, 장점, 사양
The RZ048-10A pairs 10A AC load ratings with recessed mounting and 5.8 GHz microwave detection so installers can compare load capacity, room coverage, and adjustment options.
주요 기능 및 장점
- 10A line-voltage control: Supports 100-265 VAC lighting circuits with the source-backed RZ048-10A load ratings shown in the specifications.
- Higher AC load profile: The 10A model is the RZ048 choice when the verified lighting load exceeds the 5A model rating.
- 5.8 GHz 마이크로웨이브 감지: 고주파 도플러 감지가 움직임을 능동적으로 감지하여 천장 설치형 자동 조명 제어를 제공합니다.
- 매립형 천장 형태: 나사 고정 또는 스프링 클립 설치를 통해 매뉴얼에 명시된 82-90 mm 타공 규격으로 돌출을 최소화한 천장 설치를 지원합니다.
- 360도 천장 감지 범위: Ceiling placement gives broad room coverage with an 8-12 m detection diameter under manual conditions.
- Non-metal material penetration: Microwave detection can pass through many plastics, glass, and thin partitions, while metal blocks detection.
- High/low sensitivity: The SENS button helps reduce nuisance detection through doors, glass, partitions, or adjacent spaces.
- 주요 기능
-
Model
RZ048-10A
Product type
천장 매립형 마이크로웨이브 동작 감지 센서 스위치
Sensor type
High-frequency microwave Doppler (HF)
Microwave frequency
5.8 GHz ISM band
Transmission power
0.4 mW
Time delay
15 s, 30 s, 1 min (default), 3 min, 5 min, 10 min, 30 min
Light sensor level
Off, 15 Lux, 25 Lux (default), 35 Lux
감도
High or Low
Material penetration
Detects through most plastics, glass, and thin partitions; metal blocks detection
- Electrical
-
전원
100 VAC ~ 265 VAC
Power frequency
50/60 Hz
배선
White to Neutral; Red to Load; Black to Live
Power consumption
0.5 W or less standby; 1 W operation
Incandescent / Halogen load
1000 W / 110 VAC; 2200 W / 220 VAC
Fluorescent / Ballast / LED load
500 W / 110 VAC; 1000 W / 220 VAC
- Detection & Installation
-
Detection diameter
8-12 m
Detection range
360-degree ceiling coverage
Installation height
2.5-5 m
Working temperature
-10 to +40 C
Working humidity
< 93% RH non-condensing
Mounting methods
Screw mount or spring clip mount
Ceiling cutout
82-90 mm circular hole for spring clip mounting
Face diameter
106 mm
Body diameter
78 mm
Height
64 mm overall; 25 mm lower visible section
Metal clearance
Keep at least 1 m from large metal or highly reflective surfaces; do not fully enclose in metal
Installation notes
Avoid windows, doors, automatic doors, rotating equipment, HVAC airflow, fans, moving machinery, vibrating fixtures, and direct view to public corridors or outdoor areas
FAQ
How is the RZ048-10A different from the 5A model?
The 10A model has higher verified AC load ratings. Both models use 100-265 VAC input, neutral-required wiring, the same recessed RZ048 ceiling form, and the same microwave sensing platform.
Does the RZ048-10A need a neutral wire?
Yes. The AC wiring diagram requires White to Neutral, Red to Load, and Black to Live.
What loads can the 10A model control?
The manual lists 1000 W / 110 VAC and 2200 W / 220 VAC for incandescent or halogen loads, and 500 W / 110 VAC and 1000 W / 220 VAC for fluorescent, ballast, or LED loads.
Can microwave sensing detect through glass or partitions?
Yes. The manual states that microwave sensing can detect through most plastics, glass, and thin partitions, while metal blocks detection. Placement and sensitivity should be adjusted accordingly.
How can nuisance triggering be reduced?
Reduce sensitivity to Low or relocate the sensor to avoid doors, windows, adjacent spaces, moving machinery, HVAC airflow, fans, vibrating fixtures, and large metal or reflective surfaces.
What time delay settings are available?
Time delay settings are 15 s, 30 s, 1 min, 3 min, 5 min, 10 min, and 30 min. The manual default is 1 min.
상품평
아직 상품평이 없습니다.