DC Motion Sensor BS010
$7.00
The BS010 is a low voltage DC12-30V motion sensor switch which uses advanced passive infrared sensor(PIR) and MCU control. It can automatically turn lights on by detecting heat emitted from the motion, and turn off automatically if no movement is detected. Widely applied on the Motion-activated lighting, LED strips Security System, automatic sensory device and more.
¿No es lo que está buscando? Consulte nuestro catálogo:
Consultar a un experto
Envío rápido: 99% en stock
Gama completa de productos activados por movimiento
Consultar para pedidos al por mayor ODM/OEM
DC Motion Sensor BS010
When people enter the sensing range, the motion sensor will output a voltage equal to the input voltage, and after the delay time, it will output 0V. During the delay time, if a motion is detected, the delay time will reset and start a new delay time.
Features, Benefits, Specs
Features & Benefits
- Motion activated: You can use this small motion sensor switch to control lighting like LED strip lights.
- Sensor de luz: This allows you to let the motion sensor function only in pre-set ambient brightness conditions.
- Delay Time: The delay time controls how long the light stays on once it gets triggered. During the delay time, if motion is detected, the delay time will reset.
- Sensitivity: The sensitivity controls how far you are able to activate the sensor.
- Wide Applications: You can use this sensor on different occasions like entryway lighting, cabinet lighting, gun safe lighting, pantry lighting, under the bed rails lighting.
- Características
-
Output voltage
DC12V-30V
Delay time
5~25s(2~280 Seconds adjustable)
Light sensor(Black lens)
No
Light sensor(White lens)
Yes
Detecting range
≤ 110 degrees cone angle, 4M-7M(10CM-7M adjustable)
Trigger way
Continuous triggering
Size
48*25*14 mm
1 valoración en DC Motion Sensor BS010
También te recomendamos…
-
Sensor de movimiento y presencia para montaje en techo de voltaje de red
RZ036-10A- Occupancy mode
- 100~265V, 10A
- Neutral Wire Required
- 1600 sq ft
-
Interruptor con sensor de movimiento para presencia / vacancia / manual, neutro necesario, UE
RZ022-5A- Occupancy, Vacancy, ON/OFF mode
- 100~265V, 5A
- Neutral Wire Required
- Fits the European round backbox
-
Occupancy / Vacancy / Manual Motion Sensor Switch, Neutral Required, UK
RZ023-5A- Occupancy, Vacancy, ON/OFF mode
- 100~265V, 5A
- Neutral Wire Required
- Fits the UK square pattress box
-
Interruptor con sensor de movimiento de ocupación / vacancia / manual, no requiere neutro, certificado UL
RZ021-5A-G- Occupancy, Vacancy, ON/OFF mode
- 120V, 5A
- Ground Wire Required
- Fits the US 1-Gang wall box
Bernard kim –
Can increase delay time to 20 or 30 Minutes?
I want to turn on our UV light for 20 to 30 minutes after vacancy.
Rayzeek –
Hi Bernard,
It’s possible. Our sales will contact you by email.