RZ038 12V/24V 360-graders indbygget loft-PIR bevægelsessensor afbryder
$10.00
RZ038 12V/24V is the low-voltage DC version of the recessed ceiling PIR motion sensor switch for constant-voltage lighting control.
It operates from 12 VDC or 24 VDC constant-voltage power, supports a 10-30 VDC input range, and uses DC wiring for projects that should not use the AC 5A or 10A RZ038 models.
- 12 VDC / 24 VDC input, 10-30 VDC range
- Max work current: 10A
- 360-graders PIR-detektion med 8-12 m detektionsdiameter
- Tidsforsinkelse: 15 s til 30 min
- Lux-indstilling: Fra, 15, 25 eller 35 Lux
Produkthøjdepunkter
- 12V/24V DC model: Low-voltage RZ038 version for constant-voltage DC lighting control.
- 10A max work current: Manual-specified max work current for the DC model.
- Loft PIR-dækning: 360-graders detektion med 8-12 m detektionsdiameter under manuelle forhold.
Er det ikke det, du leder efter? Se vores portefølje:
Konsulter en ekspert
Hurtig levering: 99% på lager
Fuld produktlinje til bevægelsesaktivering
Forespørg til bulk ODM/OEM-ordrer
Low-Voltage DC Ceiling Sensing For 12V/24V Lighting
The RZ038 12V/24V model is the low-voltage DC version of the recessed ceiling PIR motion sensor switch, intended for projects using a constant-voltage 12 VDC or 24 VDC power supply.
It keeps the same compact ceiling-mounted 360-degree sensing format while separating the DC product from the 100-265 VAC 5A and 10A RZ038 models.
Coverage For Storage, Utility, And Low-Voltage Lighting Areas
The sensor uses ceiling-mounted PIR coverage with high/low sensitivity adjustment, helping installers tune detection for rooms where people enter, move through, or work for short periods.
Use it when the project calls for DC lighting control and the power supply, load, and wiring path match the 12 VDC or 24 VDC manual requirements.
Funktioner, fordele, specifikationer
The RZ038 12V/24V model combines low-voltage DC power, 360-degree PIR detection, and adjustable timing and Lux controls so buyers can confirm DC supply fit and coverage before ordering.
Funktioner og fordele
- 12V/24V DC input: Works from a constant-voltage 12 VDC or 24 VDC supply, with the manual listing a 10-30 VDC input range.
- 10A max work current: The DC model is specified with a 10A max work current for compatible low-voltage loads.
- DC wiring path: The manual diagram separates Black to DC positive, White to DC negative, Red to Load positive, and Load negative back to DC negative.
- 360-graders PIR-detektion: Loftplacering giver bred rumdækning med en 8-12 m detektionsdiameter, når den installeres inden for de manuelle betingelser.
- Justerbar tidsforsinkelse: Vælg 15 s, 30 s, 1 min, 3 min, 5 min, 10 min eller 30 min for at matche rummets trafikmønster.
- Valgbar lux-tærskel: Indstil Fra, 15 Lux, 25 Lux eller 35 Lux for at styre, om bevægelse kan tænde lyset, når der er omgivende lys til stede.
- Funktioner
-
Model
RZ038-12V/24V
Produkttype
Indbygget loftmonteret PIR bevægelsessensor afbryder
Sensortype
Passiv infrarød (PIR)
Tidsforsinkelse
15 s, 30 s, 1 min (standard), 3 min, 5 min, 10 min, 30 min
Lysfølerniveau
Fra, 15 Lux, 25 Lux (standard), 35 Lux
Følsomhed
Høj eller Lav
Opstartsadfærd
1 minuts opvarmning efter strømmen er tændt eller gendannet
- Elektrisk
-
Input voltage
12 VDC / 24 VDC (10-30 VDC)
Max work current
10A
Power supply type
Constant-voltage DC power supply
Ledningsføring
Black to 12V/24VDC +; White to 12V/24VDC -; Red to Load +; Load – to 12V/24VDC –
- Registrering & Installation
-
Registreringsdiameter
8-12 m når omgivende temperatur er under 27 C
Registreringsområde
360-graders loftdækning
Bevægelsesdetektionshastighed
0,6-1,5 m/s
Installationhøjde
2,5-3,5 m
Driftstemperatur
-10 til +40 °C
Driftsfugtighed
< 93% RH
Loftudskæring
82-90 mm rundt hul til fjederclipsmontering
Frontdiameter
106 mm
FAQ
Is the RZ038 12V/24V model for AC line voltage?
No. This model is for a constant-voltage DC power supply. Use the RZ038-5A or RZ038-10A models for 100-265 VAC line-voltage applications.
What DC voltage does it use?
The manual lists 12 VDC / 24 VDC input with a 10-30 VDC input range.
How is the DC model wired?
The manual diagram connects Black to 12V/24VDC positive, White to 12V/24VDC negative, Red to Load positive, and Load negative back to 12V/24VDC negative.
What is the max work current?
The RZ038 12V/24V manual lists max work current as 10A. Confirm the load and power supply before installation.
Does it have the same time-delay and Lux settings as the AC models?
Yes. The manual lists the same time-delay options and Lux threshold options for the DC model.
Hvor skal denne loftsensor monteres?
Manualen anbefaler en installationshøjde på 2,5-3,5 m og råder til at undgå varmekilder, tvunget luft, ventilationssystemer, loftventilatorer og hængende lysarmaturer i nærheden af sensoren.
Anmeldelser
Der er endnu ikke nogle anmeldelser.