Kit: Low Voltage Controller+ 2X Wireless Motion Sensor
$22.00
Rayzeek passive infrared technology is more advanced and accurate with an improved MCU for better human motion detections. Our unique motion sensor design makes our motion sensors stand out and are highly favored by customers worldwide.
If the motion sensor(RZ016W) does not detect the motion, after the time delay(adjustable) expires, the main controller will turn off the sensor.If the motion sensor detects the motion again, the motion sensor will give out a signal to turn on the load immediately. You can also adjust the time delay and the light level via the main controller if it’s connected to a light.
產品亮點
- RZ016A: Main plug-in controller
- RZ016W: Wireless, battery-powered, motion sensors
- The RZ016A can work independently as a dimmer switch
- The RZ016A can pair with 1 or multiple RZ016W to extend the detecting coverage
未找到您需要的產品？ 瀏覽我們的產品系列：
諮詢專家
Motion Sensor Switch Kit RZ016
The RZ016 motion sensor & controller is a remote control motion sensor kit for DC 12/24V light strips. With this kit, you can transform any light strip into motion activated style in no time.
The kit consists of two devices: The RZ016A controller and the RZ016W motion sensor. Connect the controller with your light strips, and it’s done. When the motion sensor detects your presence within the range, it will send a signal to the controller to turn on the connected light.
Multi-location Use Case
The RZ016 motion sensor kit can be used for multi-location control. The controller can pair with one, two, or multiple sensors. As long as either sensor detects motion and sends signals to the controller, the controller will turn on the light.
As the sensors are remotely connected with no wiring needed, it’s incredibly flexible and convenient for all types of complicated applications.
User-Friendly Operation
The RZ016 kit has 3 working modes. ON, OFF or Auto. In ON/OFF mode, the RZ016A controller can work standalone as a normal dimmer switch without the motion sensor.
- Turn the light ON or OFF like a manual switch.
- Adjust the light level like a dimmer switch.
In auto mode, the light is controlled by motion sensors automatically. You can additionally:
- Select time delay from 15s to 900s.
- Enable or disable the light sensor(35lux).
Plug and Play
The installation is as easy as it gets. The controller is a plug-in switch. You simply plug it in and replace the existing light strip inline switch.
Install two AAA batteries in the motion sensor. Turn on the motion sensor, and that’s it. The sensor and controller are already pre-paired from the factory.
功能、優勢、規格
功能與優勢
- 延遲時間: Press this button to adjust the time delay, the time setting on the sensor from the last detected motion until the lights are turned OFF. There are 6 options for time delay:15s, 30s, 60s, 180s, 300s, 900s.
- 光照度: Press this button to adjust the lighting light level. The light level will change from 20%~100%
- Auto Mode: The main controller will be controlled by motion sensor (RZ016W) and turns on/off by receiving the signal from the motion sensor (RZ016W).
- ON Mode: The main controller will turn on the load all the time. The motion sensor will not take effect.
- OFF Mode: The main controller will turn off the load all the time. The motion sensor will not take effect.
- RZ016A
名稱
控制器-接收器
輸入電壓
DC 12~24V
輸出電壓
等同於輸入電壓
負載電流
≤ 5A
靜態功耗
≤ 10 uA
模式
自動/開啟/關閉
延時
15秒, 30秒, 60秒, 180秒, 300秒, 900秒 可調
光照度
20%~100% 可調
- RZ016W
名稱
感應開關-發射器
輸入電壓
2 節 AAA 電池供電
輸出電壓
等同於輸入電壓
模式
1. 感應器 開/關，2. 光感應器 開(≤35lux)/關
偵測範圍
5~8 米
無線傳輸範圍
7-20 米（當電池電壓低於 2.5V 時為 7米）
商品評價
目前沒有評價。