What is Semi Flush
Semi flush refers to a type of lighting fixture that is mounted to the ceiling with a small gap between the base of the fixture and the ceiling. This gap, typically ranging from 4 to 8 inches, distinguishes semi flush lights from flush mount lights. The purpose of this design is to create a visually appealing and decorative lighting solution for spaces with low ceilings, usually below 9 feet.
One of the key advantages of semi flush lights is their ability to provide better illumination compared to flush mount lights. The gap between the fixture and the ceiling allows for a more uplifting effect, as the light reflects off the ceiling and creates a softer and more indirect lighting effect. This makes semi flush lights particularly suitable for various settings, including kitchens, bedrooms, dining rooms, restaurants, and retail stores.
Get Inspired by Rayzeek Motion Sensor Portfolios.
Doesn't find what you want? Don't worry. There are always alternate ways to solve your problems. Maybe one of our portfolios can help.
Semi flush lights are also chosen for their ability to enhance the ambiance of a room. Their attractive design adds charm and detail to the interior without overwhelming the space. By offering a stylish alternative to pendants or chandeliers, semi flush lights are often used in rooms with limited space, as they can add an illusion of extra space while providing ample illumination to large areas.
Maybe You Are Interested In
- 吸頂安裝 PIR 佔有感應器，帶乾接點繼電器輸出
- 12/24VDC 或 12/24VAC 低壓電源
- COM、NO 和 NC 隔離繼電器觸點，用於 EMS、HVAC 和建築控制輸入
- Low-voltage DC recessed ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- 吸頂安裝 RZ037 PIR 佔有感應器調光器（適用於 220V 電源）
- 最大工作電流 3A，額定負載 660W
- LUX 按鈕可控制光感應器的開/關以及用戶設定的調光亮度
- 吸頂安裝 RZ037 PIR 佔有感應器調光器（適用於 110V 電源）
- 最大工作電流 3A，額定負載 330W
- LUX 按鈕可控制光感應器的開/關以及用戶設定的調光亮度
- Low-voltage DC ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Low-voltage DC recessed ceiling mount PIR motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- Max work current 10A with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Wireless switch and receiver kit for indoor ON/OFF lighting control
- 100-230VAC, 50/60Hz receiver with 5A rated current
- CR2032-powered wireless switch with 2.4GHz communication
- Occupancy (Auto-ON/Auto-OFF)
- 12–24V DC (10–30VDC), up to 10A
- 360° coverage, 8–12 m diameter
- Time delay 15 s–30 min
- Light sensor Off/15/25/35 Lux
- High/Low sensitivity
- Auto-ON/Auto-OFF occupancy mode
- 100–265V AC, 10A (neutral required)
- 360° coverage; 8–12 m detection diameter
- Time delay 15 s–30 min; Lux OFF/15/25/35; Sensitivity High/Low
- Auto-ON/Auto-OFF occupancy mode
- 100–265V AC, 5A (neutral required)
- 360° coverage; 8–12 m detection diameter
- Time delay 15 s–30 min; Lux OFF/15/25/35; Sensitivity High/Low
- 100V-230VAC
- Transmission Distance: up to 20m
- Wireless motion sensor
- Hardwired control
- Voltage: 2x AAA Batteries / 5V DC (Micro USB)
- Day/Night Mode
- Time delay: 15min, 30min, 1h(default), 2h
- EU plug power adapter
- UK plug power adapter
