What is Kilowatt (Kw)
A Kilowatt (kW) is a unit of measurement used to quantify the rate at which electrical power is consumed by lighting fixtures or devices. It represents 1000 watts of power. For example, if ten 100W light bulbs are turned on, the total energy usage would be 1kW. This indicates that each light bulb consumes 100W of power, and when multiplied by the number of bulbs, the total power consumption is calculated.
Furthermore, the term “kW” is also synonymous with “demand” when communicating with a utility company. It refers to the amount of power required by electrical devices at a specific moment. For instance, if ten light bulbs and a 3,000-watt clothes dryer are simultaneously turned on, the total demand or power required would be 4kW. This highlights the importance of the utility company being able to supply sufficient electricity to meet the power requirements of the connected devices.
Maybe You Are Interested In
- 吸頂安裝 PIR 佔有感應器，帶乾接點繼電器輸出
- 12/24VDC 或 12/24VAC 低壓電源
- COM、NO 和 NC 隔離繼電器觸點，用於 EMS、HVAC 和建築控制輸入
- Low-voltage DC recessed ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- 吸頂安裝 RZ037 PIR 佔有感應器調光器（適用於 220V 電源）
- 最大工作電流 3A，額定負載 660W
- LUX 按鈕可控制光感應器的開/關以及用戶設定的調光亮度
- 吸頂安裝 RZ037 PIR 佔有感應器調光器（適用於 110V 電源）
- 最大工作電流 3A，額定負載 330W
- LUX 按鈕可控制光感應器的開/關以及用戶設定的調光亮度
- Low-voltage DC ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Low-voltage DC recessed ceiling mount PIR motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- Max work current 10A with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Wireless switch and receiver kit for indoor ON/OFF lighting control
- 100-230VAC, 50/60Hz receiver with 5A rated current
- CR2032-powered wireless switch with 2.4GHz communication
- Occupancy (Auto-ON/Auto-OFF)
- 12–24V DC (10–30VDC), up to 10A
- 360° coverage, 8–12 m diameter
- Time delay 15 s–30 min
- Light sensor Off/15/25/35 Lux
- High/Low sensitivity
- Auto-ON/Auto-OFF occupancy mode
- 100–265V AC, 10A (neutral required)
- 360° coverage; 8–12 m detection diameter
- Time delay 15 s–30 min; Lux OFF/15/25/35; Sensitivity High/Low
- Auto-ON/Auto-OFF occupancy mode
- 100–265V AC, 5A (neutral required)
- 360° coverage; 8–12 m detection diameter
- Time delay 15 s–30 min; Lux OFF/15/25/35; Sensitivity High/Low
- 100V-230VAC
- Transmission Distance: up to 20m
- Wireless motion sensor
- Hardwired control
- Voltage: 2x AAA Batteries / 5V DC (Micro USB)
- Day/Night Mode
- Time delay: 15min, 30min, 1h(default), 2h
- EU plug power adapter
- UK plug power adapter
