What is Inverse-Square Law
The Inverse-square law is a fundamental principle that describes the relationship between the intensity of light and the distance from the light source. According to this law, the intensity of light decreases in inverse proportion to the square of the distance from the source.
In simpler terms, the Inverse-square law states that as you move further away from a light source, the intensity of the light decreases. This decrease follows a specific pattern where the intensity is inversely proportional to the square of the distance. For example, if you double the distance from the light source, the intensity will decrease to one-fourth (1/2^2) of its original value. Similarly, if you triple the distance, the intensity will decrease to one-ninth (1/3^2) of its original value.
Get Inspired by Rayzeek Motion Sensor Portfolios.
Doesn't find what you want? Don't worry. There are always alternate ways to solve your problems. Maybe one of our portfolios can help.
Understanding the Inverse-square law helps determine the intensity of light at different distances from the source. Lighting designers and engineers take this principle into account when calculating the lux or lumen per square meter (lumen/m^2) at a specific point. By applying the Inverse-square law, they can make informed decisions about the placement and spacing of light sources to achieve the desired level of illuminance.
The Inverse-square law is not limited to the lighting industry. It is a fundamental principle that applies to various phenomena, including gravity, electric fields, sound, and radiation. In the context of lighting, the Inverse-square law provides insights into how light intensity changes with distance and enables professionals to create balanced and consistent lighting setups.
Maybe You Are Interested In
- 吸頂安裝 PIR 佔有感應器，帶乾接點繼電器輸出
- 12/24VDC 或 12/24VAC 低壓電源
- COM、NO 和 NC 隔離繼電器觸點，用於 EMS、HVAC 和建築控制輸入
- Low-voltage DC recessed ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- 吸頂安裝 RZ037 PIR 佔有感應器調光器（適用於 220V 電源）
- 最大工作電流 3A，額定負載 660W
- LUX 按鈕可控制光感應器的開/關以及用戶設定的調光亮度
- 吸頂安裝 RZ037 PIR 佔有感應器調光器（適用於 110V 電源）
- 最大工作電流 3A，額定負載 330W
- LUX 按鈕可控制光感應器的開/關以及用戶設定的調光亮度
- Low-voltage DC ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Low-voltage DC recessed ceiling mount PIR motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- Max work current 10A with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Wireless switch and receiver kit for indoor ON/OFF lighting control
- 100-230VAC, 50/60Hz receiver with 5A rated current
- CR2032-powered wireless switch with 2.4GHz communication
- Occupancy (Auto-ON/Auto-OFF)
- 12–24V DC (10–30VDC), up to 10A
- 360° coverage, 8–12 m diameter
- Time delay 15 s–30 min
- Light sensor Off/15/25/35 Lux
- High/Low sensitivity
- Auto-ON/Auto-OFF occupancy mode
- 100–265V AC, 10A (neutral required)
- 360° coverage; 8–12 m detection diameter
- Time delay 15 s–30 min; Lux OFF/15/25/35; Sensitivity High/Low
- Auto-ON/Auto-OFF occupancy mode
- 100–265V AC, 5A (neutral required)
- 360° coverage; 8–12 m detection diameter
- Time delay 15 s–30 min; Lux OFF/15/25/35; Sensitivity High/Low
- 100V-230VAC
- Transmission Distance: up to 20m
- Wireless motion sensor
- Hardwired control
- Voltage: 2x AAA Batteries / 5V DC (Micro USB)
- Day/Night Mode
- Time delay: 15min, 30min, 1h(default), 2h
- EU plug power adapter
- UK plug power adapter
