What is Color Shifting
Color shifting is the phenomenon where the color of light emitted by a lighting source changes or varies over time. This change in color is primarily caused by degradation mechanisms that occur in various components of the lighting system, including the semiconductor chip, phosphors, encapsulant materials, plastic resins, and lenses.
Looking For Motion-Activated Energy-Saving Solutions?
Contact us for complete PIR motion sensors, motion-activated energy-saving products, motion sensor switches, and Occupancy/Vacancy commercial solutions.
The degradation mechanisms are accelerated by factors such as high temperatures, high drive currents, inefficient heat dissipation, and chemical changes. These factors can lead to a decrease in the quantum efficiency of the LED chip and phosphor down-converter, resulting in a shift in the emitted color. Different types of color shifts can occur, including shifts in the blue, yellow, red, or green directions, depending on the specific degradation mechanisms involved.
The acceptable magnitude of color shift varies depending on the application. For example, residential lighting may allow for a maximum color shift of 0.007 Δu’v’ at 6,000 hours, while more demanding applications like hospitality, showroom, and museum lighting may require a much higher chromaticity stability, often desiring a color shift of up to 0.003 Δu’v’ over five years.
Maybe You Are Interested In
- 吸頂安裝 PIR 佔有感應器，帶乾接點繼電器輸出
- 12/24VDC 或 12/24VAC 低壓電源
- COM、NO 和 NC 隔離繼電器觸點，用於 EMS、HVAC 和建築控制輸入
- Low-voltage DC recessed ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- 吸頂安裝 RZ037 PIR 佔有感應器調光器（適用於 220V 電源）
- 最大工作電流 3A，額定負載 660W
- LUX 按鈕可控制光感應器的開/關以及用戶設定的調光亮度
- 吸頂安裝 RZ037 PIR 佔有感應器調光器（適用於 110V 電源）
- 最大工作電流 3A，額定負載 330W
- LUX 按鈕可控制光感應器的開/關以及用戶設定的調光亮度
- Low-voltage DC ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Low-voltage DC recessed ceiling mount PIR motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- Max work current 10A with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Wireless switch and receiver kit for indoor ON/OFF lighting control
- 100-230VAC, 50/60Hz receiver with 5A rated current
- CR2032-powered wireless switch with 2.4GHz communication
- Occupancy (Auto-ON/Auto-OFF)
- 12–24V DC (10–30VDC), up to 10A
- 360° coverage, 8–12 m diameter
- Time delay 15 s–30 min
- Light sensor Off/15/25/35 Lux
- High/Low sensitivity
- Auto-ON/Auto-OFF occupancy mode
- 100–265V AC, 10A (neutral required)
- 360° coverage; 8–12 m detection diameter
- Time delay 15 s–30 min; Lux OFF/15/25/35; Sensitivity High/Low
- Auto-ON/Auto-OFF occupancy mode
- 100–265V AC, 5A (neutral required)
- 360° coverage; 8–12 m detection diameter
- Time delay 15 s–30 min; Lux OFF/15/25/35; Sensitivity High/Low
- 100V-230VAC
- Transmission Distance: up to 20m
- Wireless motion sensor
- Hardwired control
- Voltage: 2x AAA Batteries / 5V DC (Micro USB)
- Day/Night Mode
- Time delay: 15min, 30min, 1h(default), 2h
- EU plug power adapter
- UK plug power adapter
