What is Bayonet Cap
Bayonet Cap, also known as BC, is a type of lamp base. It is named after its design, which resembles a bayonet fitting. The Bayonet Cap features a 22mm diameter (B22d) and is characterized by a twist and lock mechanism. This mechanism involves two pins on the bulb that retract and then expand into slots inside the fitting when twisted, ensuring a secure connection.
The Bayonet Cap is distinguished from the Edison Screw (ES) fitting, which uses a screw thread instead of pins. It is important to note that the Bayonet Cap is the most commonly used bulb base in the UK. Additionally, there are smaller sizes available, known as Small Bayonet Cap (SBC), with a diameter of 15mm (B15d).
Maybe You Are Interested In
- 吸頂安裝 PIR 佔有感應器，帶乾接點繼電器輸出
- 12/24VDC 或 12/24VAC 低壓電源
- COM、NO 和 NC 隔離繼電器觸點，用於 EMS、HVAC 和建築控制輸入
- Low-voltage DC recessed ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- 吸頂安裝 RZ037 PIR 佔有感應器調光器（適用於 220V 電源）
- 最大工作電流 3A，額定負載 660W
- LUX 按鈕可控制光感應器的開/關以及用戶設定的調光亮度
- 吸頂安裝 RZ037 PIR 佔有感應器調光器（適用於 110V 電源）
- 最大工作電流 3A，額定負載 330W
- LUX 按鈕可控制光感應器的開/關以及用戶設定的調光亮度
- Low-voltage DC ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Low-voltage DC recessed ceiling mount PIR motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- Max work current 10A with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Wireless switch and receiver kit for indoor ON/OFF lighting control
- 100-230VAC, 50/60Hz receiver with 5A rated current
- CR2032-powered wireless switch with 2.4GHz communication
- Occupancy (Auto-ON/Auto-OFF)
- 12–24V DC (10–30VDC), up to 10A
- 360° coverage, 8–12 m diameter
- Time delay 15 s–30 min
- Light sensor Off/15/25/35 Lux
- High/Low sensitivity
- Auto-ON/Auto-OFF occupancy mode
- 100–265V AC, 10A (neutral required)
- 360° coverage; 8–12 m detection diameter
- Time delay 15 s–30 min; Lux OFF/15/25/35; Sensitivity High/Low
- Auto-ON/Auto-OFF occupancy mode
- 100–265V AC, 5A (neutral required)
- 360° coverage; 8–12 m detection diameter
- Time delay 15 s–30 min; Lux OFF/15/25/35; Sensitivity High/Low
- 100V-230VAC
- Transmission Distance: up to 20m
- Wireless motion sensor
- Hardwired control
- Voltage: 2x AAA Batteries / 5V DC (Micro USB)
- Day/Night Mode
- Time delay: 15min, 30min, 1h(default), 2h
- EU plug power adapter
- UK plug power adapter
