בלוג

What is Crest Factor

הורס ה

עודכן לאחרונה: דצמבר 26, 2023

What is Crest Factor

Crest factor is the ratio between the peak value and the root mean square (RMS) value of a current or voltage signal. It is a measurement instrument specification that describes the size of the dynamic range of a waveform or signal. Crest Factor is used to indicate the quality of an input signal and can be a measure of the peak-to-RMS ratio.

In the lighting industry, different types of loads exhibit different current waveforms, which can have varying crest factors. Resistive loads, such as heaters and incandescent lights, have nearly sinusoidal current waveforms with a crest factor near 1.4. Power factor corrected loads, like electronic lighting ballasts and computer power supplies, typically have crest factors ranging from 1.4 to 1.5. Nonlinear loads, such as battery chargers and VSD motor controls, can have crest factors ranging from 2.0 to 3.0 or even higher.

Maybe You Are Interested In

  • גלאי תפוסה PIR מותקן בתקרה עם פלט ממסר מגע יבש
  • מתח נמוך 12/24VDC או 12/24VAC
  • מגעי ממסר מבודדים COM, NO ו-NC עבור קלטי EMS, HVAC ובקרת בניין
RZ048 recessed ceiling microwave motion sensor product image
  • Low-voltage DC recessed ceiling-mounted microwave motion sensor switch
  • קלט 12 VDC / 24 VDC עם טווח 10-30 VDC
  • זרימת עבודה מקסימלית 10A עם השהיה מתכווננת, סף לומן ורגישות
RZ048 recessed ceiling microwave motion sensor product image
  • Higher-load recessed ceiling-mounted microwave motion sensor switch
  • קלט מתח קו 100-265 VAC, דגם 10A
  • חיישן מיקרוגל 5.8 GHz עם השהיה מתכווננת, סף לומן ורגישות
RZ048 recessed ceiling microwave motion sensor product image
  • Recessed ceiling-mounted microwave motion sensor switch
  • קלט קו מתח 100-265 VAC, דגם 5A
  • חיישן מיקרוגל 5.8 GHz עם השהיה מתכווננת, סף לומן ורגישות
  • מכוונן תפוסה PIR RZ037 מותקן בתקרה לכוח 220V
  • זרם עבודה מרבי 3A עם עומס מדורג 660W
  • כפתור LUX שולט על הפעלת/כיבוי חיישן האור ועל עמעום הבהירות שנקבע על ידי המשתמש
  • מכוונן תפוסה PIR RZ037 מותקן בתקרה לכוח 110V
  • זרם עבודה מרבי 3A עם עומס מדורג 330W
  • כפתור LUX שולט על הפעלת/כיבוי חיישן האור ועל עמעום הבהירות שנקבע על ידי המשתמש
מתג חיישן תנועה מיקרוגל להרכבה על תקרה RZ047
  • מתג חיישן תנועה מיקרוגל DC מותקן בתקרה
  • קלט 12 VDC / 24 VDC עם טווח 10-30 VDC
  • זרימת עבודה מקסימלית 10A עם השהיה מתכווננת, סף לומן ורגישות
מתג חיישן תנועה מיקרוגל להרכבה על תקרה RZ047
  • מתג חיישן תנועה מיקרוגל מותקן בתקרה בעומס גבוה יותר
  • קלט מתח קו 100-265 VAC, דגם 10A
  • חיישן מיקרוגל 5.8 GHz עם השהיה מתכווננת, סף לומן ורגישות
מתג חיישן תנועה מיקרוגל להרכבה על תקרה RZ047
  • מתג חיישן תנועה מיקרוגל מותקן בתקרה
  • קלט קו מתח 100-265 VAC, דגם 5A
  • חיישן מיקרוגל 5.8 GHz עם השהיה מתכווננת, סף לומן ורגישות
מבט צד ועליון של חיישן תנועה פסיבי אינפרא אדום (PIR) שקוע בתקרה RZ038
  • מתג תנועה PIR שקוע לתקרה במתח נמוך DC
  • קלט 12 VDC / 24 VDC עם טווח 10-30 VDC
  • זרם עבודה מרבי 10A עם השהיית זמן, סף LUX ורגישות מתכווננים
מבט קדמי של חיישן תנועה פסיבי אינפרא אדום (PIR) שקוע בתקרה RZ038
  • מתג תנועה PIR שקוע לתקרה לעומס גבוה יותר
  • קלט מתח קו 100-265 VAC, דגם 10A
  • זיהוי 360 מעלות עם השהיה מתכווננת, סף לומן ורגישות
מבט קדמי של חיישן תנועה פסיבי אינפרא אדום (PIR) שקוע בתקרה RZ038
  • מתג חיישן תנועה PIR מותקן בתקרה שקוע
  • קלט קו מתח 100-265 VAC, דגם 5A
  • זיהוי 360 מעלות עם השהיה מתכווננת, סף לומן ורגישות
RZ040 wireless switch and receiver kit
  • Wireless switch and receiver kit for indoor ON/OFF lighting control
  • 100-230VAC, 50/60Hz receiver with 5A rated current
  • CR2032-powered wireless switch with 2.4GHz communication
  • Occupancy (Auto-ON/Auto-OFF)
  • 12–24V DC (10–30VDC), up to 10A
  • 360° coverage, 8–12 m diameter
  • Time delay 15 s–30 min
  • Light sensor Off/15/25/35 Lux
  • High/Low sensitivity
  • Auto-ON/Auto-OFF occupancy mode
  • 100–265V AC, 10A (neutral required)
  • 360° coverage; 8–12 m detection diameter
  • Time delay 15 s–30 min; Lux OFF/15/25/35; Sensitivity High/Low
  • Auto-ON/Auto-OFF occupancy mode
  • 100–265V AC, 5A (neutral required)
  • 360° coverage; 8–12 m detection diameter
  • Time delay 15 s–30 min; Lux OFF/15/25/35; Sensitivity High/Low
  • 100V-230VAC
  • Transmission Distance: up to 20m
  • Wireless motion sensor
  • Hardwired control
  • Voltage: 2x AAA Batteries / 5V DC (Micro USB)
  • Day/Night Mode
  • Time delay: 15min, 30min, 1h(default), 2h

ה crest factor becomes particularly important when measuring individual loads with high current crest factors. If the peak current exceeds the capacity of the measuring instrument, such as a current transformer (CT), the readings can become inaccurate. Therefore, it is crucial to select a CT with a rated current that can handle the expected peak current.

Get Inspired by Rayzeek Motion Sensor Portfolios.

Doesn't find what you want? Don't worry. There are always alternate ways to solve your problems. Maybe one of our portfolios can help.

כתיבת תגובה

Hebrew