Most boutique hotels notice split-AC waste in small, annoying ways. Housekeeping opens a room after checkout and finds the AC still running. A guest leaves for dinner with the balcony door cracked open. The owner sees the summer electricity bill and knows the rooms are part of the problem, but nobody at the front desk can police every remote control.
The hard part is that guest-room AC control has two jobs that pull against each other. It should stop the obvious waste, but it cannot make the room feel managed by a machine. A setting that saves power and creates a hot-room complaint at 10 p.m. has not solved the problem. It has moved the problem from the utility bill to the review page.
For boutique hotels, guesthouses, serviced apartments, and short-term rentals using ductless split AC units, the useful question is not “Can we automate this?” It is “Which room behavior are we trying to control, and how quietly can we do it?”
Il modello di spreco non è solo “camera vuota”
An empty room with the AC left on is the easy case to understand. Real rooms are messier. A guest may leave for breakfast and expect the room to recover quickly when they return. Housekeeping may enter for five minutes and accidentally make the room look active again. Someone may nap with almost no movement. A balcony room may be occupied, comfortable, and still wasting energy because the door is open while the split AC keeps cooling.
That is why a simple timer is often too crude for hotel rooms. A timer only knows how long it has been running. It does not know whether the guest is asleep, whether the room has an open thermal boundary, or whether the AC should be turned off completely instead of shifted to a less aggressive command. Good guest-room control starts with the failure pattern, not with the device.
Parti dal problema della stanza, poi scegli il controller Rayzeek
If the main problem is guests leaving split AC units running after they leave the room, the Sensore di movimento per condizionatore Rayzeek RZ050-DP Dual Power is the direct fit. It detects occupancy and sends learned commands from the existing AC remote after the configured delay. For many sealed-window rooms, that is the problem worth solving first.
If the room has a balcony door, patio door, terrace door, or operable window, vacancy is only part of the story. The room can be occupied and still be wasting power because the AC is fighting outdoor air. For those rooms, the Rayzeek RZ050-DS kit with two RZ001 door/window sensors is the better application match. The controller still handles occupancy, while the door/window sensors add a signal that motion alone cannot see.
A quick room audit usually makes the choice clear. Interior room with sealed windows and guests leaving the AC on: start with the RZ050-DP. Balcony or garden room where the door is often open while cooling: use the RZ050-DS kit with RZ001 sensors. Mixed property: do not force one answer across every room. Standardize by room type, not by the cheapest hardware line.
Forse siete interessati a
- Dimmer con sensore di presenza PIR RZ037 da montaggio a soffitto per alimentazione 220V
- Corrente di lavoro massima 3A con carico nominale 660W
- Il pulsante LUX controlla l'accensione/spegnimento del sensore di luce e la luminosità di dimmerazione impostata dall'utente
- Dimmer con sensore di presenza PIR RZ037 da montaggio a soffitto per alimentazione 110V
- Corrente di lavoro massima 3A con carico nominale 330W
- Il pulsante LUX controlla l'accensione/spegnimento del sensore di luce e la luminosità di dimmerazione impostata dall'utente
- Sensore di presenza PIR da montaggio a soffitto con uscita relè a contatto secco
- Alimentazione a bassa tensione 12/24VDC o 12/24VAC
- Contatti relè isolati COM, NO e NC per ingressi di controllo EMS, HVAC e building
- Interruttore a sensore di movimento a microonde a bassa tensione DC da incasso a soffitto
- Ingresso 12 VDC / 24 VDC con range 10-30 VDC
- Corrente di lavoro max 10A con ritardo temporale, soglia Lux e sensibilità regolabili
- Interruttore a sensore di movimento a microonde da incasso a soffitto per carichi superiori
- Ingresso tensione di linea 100-265 VAC, modello 10A
- Rilevamento a microonde 5.8 GHz con ritardo temporale, soglia Lux e sensibilità regolabili
- Interruttore a sensore di movimento a microonde da incasso a soffitto
- Ingresso tensione di linea 100-265 VAC, modello 5A
- Rilevamento a microonde 5.8 GHz con ritardo temporale, soglia Lux e sensibilità regolabili
- Interruttore a sensore di movimento a microonde a bassa tensione DC da montaggio a soffitto
- Ingresso 12 VDC / 24 VDC con range 10-30 VDC
- Corrente di lavoro max 10A con ritardo temporale, soglia Lux e sensibilità regolabili
- Interruttore a sensore di movimento a microonde da montaggio a soffitto per carichi superiori
- Ingresso tensione di linea 100-265 VAC, modello 10A
- Rilevamento a microonde 5.8 GHz con ritardo temporale, soglia Lux e sensibilità regolabili
- Interruttore a sensore di movimento a microonde da montaggio a soffitto
- Ingresso tensione di linea 100-265 VAC, modello 5A
- Rilevamento a microonde 5.8 GHz con ritardo temporale, soglia Lux e sensibilità regolabili
- Kit interruttore e ricevitore wireless per controllo ON/OFF dell'illuminazione interna
- Ricevitore 100-230VAC, 50/60Hz con corrente nominale 5A
- Interruttore wireless alimentato da CR2032 con comunicazione a 2.4GHz
- Occupazione (Auto-ON/Auto-OFF)
- 12–24V DC (10–30VDC), fino a 10A
- Copertura a 360°, diametro 8–12 m
- Ritardo temporale 15 s–30 min
- Sensore di luce Spento/15/25/35 Lux
- Sensibilità Alta/Bassa
- Modalità di occupazione Auto-ON/Auto-OFF
- 100–265V CA, 10A (neutro richiesto)
- Copertura di 360°; diametro di rilevamento 8–12 m
- Ritardo temporale 15 s–30 min; Lux SPENTO/15/25/35; Sensibilità Alta/Bassa
- Modalità di occupazione Auto-ON/Auto-OFF
- 100–265V AC, 5A (fase neutra richiesta)
- Copertura di 360°; diametro di rilevamento 8–12 m
- Ritardo temporale 15 s–30 min; Lux SPENTO/15/25/35; Sensibilità Alta/Bassa
- 100V-230VAC
- Distanza di trasmissione: fino a 20m
- Sensore di movimento wireless
- Controllo cablato
- Voltaggio: 2 batterie AAA / 5 V CC (Micro USB)
- Modalità giorno/notte
- Ritardo: 15min, 30min, 1h (default), 2h
- Adattatore di alimentazione con spina EU
- Adattatore di alimentazione con spina UK
- Adattatore di alimentazione con spina US
- DC 5V
- Distanza di trasmissione: fino a 30 m
- Modalità giorno/notte
- DC 5V
- Distanza di trasmissione: fino a 30 m
- Modalità giorno/notte
Il caso RZ050-DP: alimentazione flessibile e comandi appresi
The RZ050-DP is most useful when the installation needs to stay simple and the room envelope is mostly closed. Think interior rooms, sealed-window rooms, serviced apartments without balcony doors, or retrofits where replacing the AC system is not on the table. Because it can be powered by battery or USB, placement can follow the room’s motion pattern instead of the nearest convenient outlet.
That placement matters. A controller pointed only at the entrance may miss the guest reading in bed or working at the desk. Before installing across a property, test the intended mounting position from the bed, desk, luggage area, and path to the bathroom. Also confirm that the learned IR command reliably reaches the split AC receiver from that same position. A setup that works in your hand but fails from the wall is not commissioned.
The learned-command approach gives operators a practical choice: full off, or a gentler command such as a higher set temperature, depending on the room. Full off may be fine in mild weather or in rooms that recover quickly. In humid climates, premium rooms, or slow-cooling spaces, a softer away command can reduce waste without making the guest return to a stale room. The tradeoff is simple: shorter delays and stronger commands save more energy, but they need more careful testing against comfort.
Cercate soluzioni per il risparmio energetico attivate dal movimento?
Contattateci per avere sensori di movimento PIR completi, prodotti per il risparmio energetico attivati dal movimento, interruttori per sensori di movimento e soluzioni commerciali Occupancy/Vacancy.
Il caso dei sensori porta/finestra: smettere di raffrescare l’esterno
Open-window and open-balcony waste is a different problem because the room may still be occupied. A guest can sit inside with the balcony door open and the AC running. To a motion-only controller, that still looks like a valid occupied room. To the electricity bill, it looks like hours of cooling with no closed boundary.
The RZ001 door/window sensors are useful because they respond to the opening itself. In a room with one balcony door and one operable window, the two-sensor kit covers the likely leak points without asking staff to inspect the room manually. It is not about stopping guests from using the balcony. It is about preventing the AC from running as if the door were closed.
This option does add commissioning work. The sensor and magnet need to align after the door or window is opened and closed the way guests actually use it, not just during a quick test with the door barely moving. The response delay also matters. Too fast, and the room feels fussy. Too slow, and the AC spends too long cooling outdoor air. For balcony rooms, that extra setup is usually worth it because occupancy sensing cannot solve this failure on its own.
Non mettere in servizio le camere per gli ospiti come se fossero ripostigli
Le camere degli ospiti hanno lunghi periodi di scarso movimento. Un ospite potrebbe dormire, guardare la TV, leggere o lavorare in silenzio. Se il ritardo per il rilevamento della stanza libera è troppo aggressivo, il controller può fare esattamente ciò che gli è stato indicato e comunque creare un soggiorno spiacevole. Inizia con tempistiche conservative, poi riducile solo dopo aver testato i reali schemi di utilizzo della camera.
A practical pilot should include more than one room type. Test a sealed-window room, a balcony room, and any room that usually attracts comfort complaints. For each room, document the chosen away command, the vacancy delay, the controller location, and whether door/window sensors are installed. Then test the normal guest paths: entering, leaving for a short time, lying in bed, working at the desk, using the bathroom at night, and opening the balcony door long enough to match real behavior.
Ispiratevi ai portafogli dei sensori di movimento Rayzeek.
Non trovate quello che volete? Non preoccupatevi. Ci sono sempre modi alternativi per risolvere i vostri problemi. Forse uno dei nostri portafogli può aiutarvi.
The goal is a boring result. The guest leaves and the AC stops wasting energy after a sensible delay. The guest sleeps and the room does not surprise them. The balcony door stays open and the AC control responds to the open boundary. Staff have fewer rooms to chase manually, and managers can explain the policy without apologizing for it.
Una semplice regola di scelta
Use the RZ050-DP when the main goal is occupancy-based split AC control in rooms without a serious open-door or open-window problem. Use the RZ050-DS kit with RZ001 door/window sensors when the room can be open to outdoor air while occupied.
If you are unsure, do not start with the whole property. Pick a few rooms that represent the real mix: one sealed room, one balcony room, and one room with a history of comfort complaints. Commission those properly, watch where the tradeoffs show up, then roll out by room type. The product choice should follow the failure you actually need to stop, not the other way around.
