BLOG

What is IEEE

Horace He

Last Updated: Desember 26, 2023

What is IEEE

IEEE refers to the Institute of Electrical and Electronics Engineers. It is an international professional organization that focuses on advancing technology in various fields, including the lighting industry. The IEEE Bombay Section is responsible for organizing the IEEE Sustainable Smart Lighting World Conference & Expo (LS:18), which is a charter IEEE Conference sponsored by IEEE Power & Energy Society and IEEE Industrial Application Society.

Dapatkan Inspirasi dari Portofolio Sensor Gerakan Rayzeek.

Tidak menemukan apa yang Anda inginkan? Jangan khawatir. Selalu ada cara alternatif untuk menyelesaikan masalah Anda. Mungkin salah satu portofolio kami dapat membantu.

The main objective of this conference is to facilitate collaboration between the Lighting Symposium Series (LS) community, which specializes in lighting systems and is expanding into smart and human-centric lighting, and the IEEE community, which emphasizes innovation, advancement, and energy efficiency in lighting solutions. By bringing together these two communities, the conference aims to promote knowledge exchange and advancements in the field of lighting.

The IEEE Sustainable Smart Lighting World Conference & Expo (LS:18) invites contributions in the form of full papers or abstracts in various tracks such as Solid-State Lighting, Lighting 4.0, Connected Lighting Systems (CLS), Human Centric Lighting (HCL), and Micro-grids/Sustainable Lighting. The topics covered in these papers or abstracts encompass a wide range of areas, including Residential Lighting, LEDification of Illumination, Visual Light Communications (VLC), Outdoor Lighting, Light-as-a-service (LaaS), Efficiency/Clean Power, Smart Devices and Appliances, Smart Grid/Smart Energy, Smart Village/Communities, Lighting Standards, Smart Lighting in Developing Economies, Smart Lighting in Emerging Economies, and Commercial Models of Lighting Projects.

Mungkin Anda Tertarik Dengan

  • Ceiling-mounted PIR occupancy sensor dengan output dry-contact relay
  • Suplai tegangan rendah 12/24VDC atau 12/24VAC
  • Kontak relai terisolasi COM, NO, dan NC untuk input EMS, HVAC, dan kontrol gedung
Gambar produk sensor gerak gelombang mikro plafon tersembunyi RZ048
  • Low-voltage DC recessed ceiling-mounted microwave motion sensor switch
  • Input 12 VDC / 24 VDC dengan rentang 10-30 VDC
  • Arus kerja maks 10A dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
Gambar produk sensor gerak gelombang mikro plafon tersembunyi RZ048
  • Higher-load recessed ceiling-mounted microwave motion sensor switch
  • Input tegangan jala-jala 100-265 VAC, model 10A
  • Penginderaan gelombang mikro 5.8 GHz dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
Gambar produk sensor gerak gelombang mikro plafon tersembunyi RZ048
  • Recessed ceiling-mounted microwave motion sensor switch
  • Input tegangan jala-jala 100-265 VAC, model 5A
  • Penginderaan gelombang mikro 5.8 GHz dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
  • Ceiling-mounted RZ037 PIR occupancy sensor dimmer untuk daya 220V
  • Arus kerja maksimum 3A dengan beban pengenal 660W
  • Tombol LUX mengontrol ON/OFF sensor cahaya dan kecerahan peredupan yang diatur pengguna
  • Ceiling-mounted RZ037 PIR occupancy sensor dimmer untuk daya 110V
  • Arus kerja maksimum 3A dengan beban pengenal 330W
  • Tombol LUX mengontrol ON/OFF sensor cahaya dan kecerahan peredupan yang diatur pengguna
Sakelar sensor gerak gelombang mikro terpasang di plafon RZ047
  • Sakelar sensor gerak gelombang mikro plafon DC tegangan rendah
  • Input 12 VDC / 24 VDC dengan rentang 10-30 VDC
  • Arus kerja maks 10A dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
Sakelar sensor gerak gelombang mikro terpasang di plafon RZ047
  • Sakelar sensor gerak gelombang mikro plafon beban lebih tinggi
  • Input tegangan jala-jala 100-265 VAC, model 10A
  • Penginderaan gelombang mikro 5.8 GHz dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
Sakelar sensor gerak gelombang mikro terpasang di plafon RZ047
  • Sakelar sensor gerak gelombang mikro plafon
  • Input tegangan jala-jala 100-265 VAC, model 5A
  • Penginderaan gelombang mikro 5.8 GHz dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
Tampilan atas dan samping sensor gerak PIR plafon tersembunyi RZ038
  • Sakelar sensor gerak PIR tanam plafon DC tegangan rendah
  • Input 12 VDC / 24 VDC dengan rentang 10-30 VDC
  • Arus kerja maks 10A dengan jeda waktu, ambang batas Lux, dan sensitivitas yang dapat disesuaikan
Tampilan depan sensor gerak PIR plafon tersembunyi RZ038
  • Sakelar sensor gerak PIR tanam plafon beban lebih tinggi
  • Input tegangan jala-jala 100-265 VAC, model 10A
  • Deteksi 360 derajat dengan jeda waktu, ambang batas Lux, dan sensitivitas yang dapat disesuaikan
Tampilan depan sensor gerak PIR plafon tersembunyi RZ038
  • Sakelar sensor gerak PIR tanam plafon
  • Input tegangan jala-jala 100-265 VAC, model 5A
  • Deteksi 360 derajat dengan jeda waktu, ambang batas Lux, dan sensitivitas yang dapat disesuaikan
Kit penerima dan sakelar nirkabel RZ040
  • Kit penerima dan sakelar nirkabel untuk kontrol pencahayaan ON/OFF dalam ruangan
  • Penerima 100-230VAC, 50/60Hz dengan arus nominal 5A
  • Sakelar nirkabel bertenaga CR2032 dengan komunikasi 2.4GHz
  • Okupansi (Auto-ON/Auto-OFF)
  • 12–24V DC (10–30VDC), hingga 10A
  • Cakupan 360°, diameter 8–12 m
  • Jeda waktu 15 dtk–30 mnt
  • Sensor cahaya Mati/15/25/35 Lux
  • Sensitivitas Tinggi/Rendah
  • Mode okupansi Auto-ON/Auto-OFF
  • 100–265V AC, 10A (diperlukan kabel netral)
  • Cakupan 360°; diameter deteksi 8–12 m
  • Jeda waktu 15 dtk–30 mnt; Lux MATI/15/25/35; Sensitivitas Tinggi/Rendah
  • Mode okupansi Auto-ON/Auto-OFF
  • 100–265V AC, 5A (diperlukan kabel netral)
  • Cakupan 360°; diameter deteksi 8–12 m
  • Jeda waktu 15 dtk–30 mnt; Lux MATI/15/25/35; Sensitivitas Tinggi/Rendah
  • 100V-230VAC
  • Jarak Transmisi: hingga 20m
  • Sensor gerak nirkabel
  • Kontrol berkabel
  • Tegangan: 2x Baterai AAA / 5V DC (Micro USB)
  • Mode Siang/Malam
  • Jeda waktu: 15mnt, 30mnt, 1j (bawaan), 2j

Frequently Asked Questions

What Is the IEEE Standard PAR1789

The formation of the IEEE Standards Working Group, known as IEEE PAR1789, aims to address the issue of flicker in LED lighting and provide recommendations for modulating current in High Brightness LEDs to mitigate health risks to viewers. This group advises various organizations, including the lighting industry, ANSI/NEMA, IEC, and EnergyStar, on this emerging concern.

What Are the Requirements for IEEE

An individual who has obtained a degree from an accredited institution or program, lasting three to five years or more, and has a minimum of three years of professional work experience in teaching, creating, developing, practicing, or managing within the field designated by IEEE.

What Are the Most Important IEEE Standards

The IEEE 802 standards encompass a range of important technologies, including Ethernet, Bridging and Virtual Bridged LANs, Wireless LAN, Wireless PAN, Wireless MAN, Wireless Coexistence, Media Independent Handover Services, and Wireless RAN. Each of these areas has a dedicated Working Group within IEEE to ensure their development and implementation.

What Is IEEE Standard Voltage

IEEE C37 standards cover typical circuit breakers with maximum voltage ratings ranging from 4.76 kV to 800 kV. These standards also specify continuous current ratings of 600 A, 1200 A, 2000 A, 3000 A, and 4000 A, which are associated with the different maximum voltage ratings.

What Are the Voltage Levels for IEEE Standard

IEEE Standard for Metal-Clad Switchgear specifies a range of rated maximum voltage levels, which vary from 4.76 kV to 38 kV. Additionally, the main bus continuous current ratings for this type of switchgear are available in options of 1200 A, 2000 A, 3000 A, and 4000 A.

Tinggalkan komentar

Indonesian