What is High Pressure Sodium (HPS)
HPS, which stands for High Pressure Sodium, is a type of grow light widely used in indoor gardening and horticulture. These lights are specifically designed to stimulate plant growth by emitting a specific portion of the electromagnetic spectrum that is ideal for photosynthesis. HPS lights mimic natural sunlight, providing plants with the necessary light spectrum for healthy development.
Mencari Solusi Hemat Energi Berbasis Sensor Gerak?
Hubungi kami untuk sensor gerak PIR lengkap, produk hemat energi berbasis sensor gerak, sakelar sensor gerak, serta solusi komersial Occupancy/Vacancy.
HPS lights are part of the high intensity discharge (HID) category of grow lights, known for their high light output and efficiency. They are particularly popular among growers due to their affordability and effectiveness in promoting plant growth. HPS systems require additional equipment, including a ballast, reflector, and a specific light bulb.
The ballast is responsible for converting the electrical current from the home outlet to a voltage suitable for the HPS light bulb. There are two types of ballasts: magnetic and digital, with digital ballasts being more common and efficient. The reflector, typically made of polished aluminum, maximizes light reflection and focuses the maximum amount of light energy on the plants. The reflector may include a socket that plugs into the ballast or be combined with the ballast to minimize wire connections and reduce magnetic interference.
Mungkin Anda Tertarik Dengan
- Ceiling-mounted PIR occupancy sensor dengan output dry-contact relay
- Suplai tegangan rendah 12/24VDC atau 12/24VAC
- Kontak relai terisolasi COM, NO, dan NC untuk input EMS, HVAC, dan kontrol gedung
- Low-voltage DC recessed ceiling-mounted microwave motion sensor switch
- Input 12 VDC / 24 VDC dengan rentang 10-30 VDC
- Arus kerja maks 10A dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Higher-load recessed ceiling-mounted microwave motion sensor switch
- Input tegangan jala-jala 100-265 VAC, model 10A
- Penginderaan gelombang mikro 5.8 GHz dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Recessed ceiling-mounted microwave motion sensor switch
- Input tegangan jala-jala 100-265 VAC, model 5A
- Penginderaan gelombang mikro 5.8 GHz dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer untuk daya 220V
- Arus kerja maksimum 3A dengan beban pengenal 660W
- Tombol LUX mengontrol ON/OFF sensor cahaya dan kecerahan peredupan yang diatur pengguna
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer untuk daya 110V
- Arus kerja maksimum 3A dengan beban pengenal 330W
- Tombol LUX mengontrol ON/OFF sensor cahaya dan kecerahan peredupan yang diatur pengguna
- Sakelar sensor gerak gelombang mikro plafon DC tegangan rendah
- Input 12 VDC / 24 VDC dengan rentang 10-30 VDC
- Arus kerja maks 10A dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Sakelar sensor gerak gelombang mikro plafon beban lebih tinggi
- Input tegangan jala-jala 100-265 VAC, model 10A
- Penginderaan gelombang mikro 5.8 GHz dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Sakelar sensor gerak gelombang mikro plafon
- Input tegangan jala-jala 100-265 VAC, model 5A
- Penginderaan gelombang mikro 5.8 GHz dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Sakelar sensor gerak PIR tanam plafon DC tegangan rendah
- Input 12 VDC / 24 VDC dengan rentang 10-30 VDC
- Arus kerja maks 10A dengan jeda waktu, ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Sakelar sensor gerak PIR tanam plafon beban lebih tinggi
- Input tegangan jala-jala 100-265 VAC, model 10A
- Deteksi 360 derajat dengan jeda waktu, ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Sakelar sensor gerak PIR tanam plafon
- Input tegangan jala-jala 100-265 VAC, model 5A
- Deteksi 360 derajat dengan jeda waktu, ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Kit penerima dan sakelar nirkabel untuk kontrol pencahayaan ON/OFF dalam ruangan
- Penerima 100-230VAC, 50/60Hz dengan arus nominal 5A
- Sakelar nirkabel bertenaga CR2032 dengan komunikasi 2.4GHz
- Okupansi (Auto-ON/Auto-OFF)
- 12–24V DC (10–30VDC), hingga 10A
- Cakupan 360°, diameter 8–12 m
- Jeda waktu 15 dtk–30 mnt
- Sensor cahaya Mati/15/25/35 Lux
- Sensitivitas Tinggi/Rendah
- Mode okupansi Auto-ON/Auto-OFF
- 100–265V AC, 10A (diperlukan kabel netral)
- Cakupan 360°; diameter deteksi 8–12 m
- Jeda waktu 15 dtk–30 mnt; Lux MATI/15/25/35; Sensitivitas Tinggi/Rendah
- Mode okupansi Auto-ON/Auto-OFF
- 100–265V AC, 5A (diperlukan kabel netral)
- Cakupan 360°; diameter deteksi 8–12 m
- Jeda waktu 15 dtk–30 mnt; Lux MATI/15/25/35; Sensitivitas Tinggi/Rendah
- 100V-230VAC
- Jarak Transmisi: hingga 20m
- Sensor gerak nirkabel
- Kontrol berkabel
- Tegangan: 2x Baterai AAA / 5V DC (Micro USB)
- Mode Siang/Malam
- Jeda waktu: 15mnt, 30mnt, 1j (bawaan), 2j
- Adaptor daya colokan UE
- Adaptor daya colokan Inggris
The HPS light bulb consists of an external glass shell and an internal glass tube containing sodium gas. When an electric current passes through the pressurized tube, the sodium gas vaporizes and emits a reddish light, which is beneficial for plant growth. It is important to handle the light bulb with gloves and avoid touching it with bare hands, as the oils on the skin can degrade and crack the bulb over time.
Frequently Asked Questions
Are High Pressure Sodium Lights Being Phased Out
A variety of popular lighting types, including certain ‘standard’ high-pressure sodium lights (including retrofit), high-pressure mercury lights, and standard performance metal halide lights, will need to be phased out by 2017.
Which Bulb Is Better High Pressure Sodium or Metal Halide
MH lamps are preferred for plants that have limited access to natural light because they offer a more natural color appearance. On the other hand, HPS lamps are ideal for plants that are in the fruiting and flowering stage as they provide a yellow/red spectrum.
How Much LED Will a 400 Watt HPS Convert To
As a point of interest, a 400-watt HPS luminaire typically produces approximately 50,000 lumens. To estimate the LED lumen output, it is generally recommended to halve the HPS lumen output. Therefore, in this scenario, the LED lumen output would be approximately 25,000 lumens.
What Is the Disadvantage of Metal Halide Lighting
One major drawback of metal halide lighting is its tendency to generate excessive heat. This can pose a challenge in environments that are already hot, like greenhouses or during the summer season. Furthermore, the intense brightness of metal halide lights can lead to issues such as glare and the formation of shadows.
What LED Is Equivalent to 600 Watt HPS
For instance, the Platinum P450 274W LED grow light from the United States is a suitable alternative to a 600 watt HPS. This LED grow light provides 11 different bands of light, spanning from ultraviolet to infrared.
How Much Does 1000w HPS Cost Run Per Month
You can calculate the monthly cost of running a 1000w HPS by dividing the wattage by 1,000 (1,000 kilowatts in 1 watt). Assuming we run the 1000 watt grow light for 18 hours a day and use the kWh rate mentioned earlier, the formula would be: 1 x $0.1559 x 18 x 30 = $84.186/month.
