{"id":20172,"date":"2026-06-05T02:24:47","date_gmt":"2026-06-05T02:24:47","guid":{"rendered":"https:\/\/staging.rayzeek.com\/?post_type=product&p=20172"},"modified":"2026-06-05T02:25:21","modified_gmt":"2026-06-05T02:25:21","slug":"rz037-dim-220v","status":"publish","type":"product","link":"https:\/\/staging.rayzeek.com\/sv\/produkter\/rz037-dim-220v\/","title":{"rendered":"RZ037-DIM 220V takmonterad PIR-n\u00e4rvarosensor med dimmer"},"content":{"rendered":"\n
\n
\n
\"RZ037<\/figure>\n<\/div><\/div>\n\n\n\n

Ceiling PIR Dimming For 220V Lighting<\/h2>\n\n\n

The RZ037-DIM 220V version adds dimming behavior to the RZ037 ceiling PIR sensor format for line-voltage lighting circuits that should respond to occupancy and ambient light.<\/p>\n\n\n\n

This is a dedicated 220V product, not a universal-voltage sensor. Match the version to the supply, then confirm the 3A maximum working current and 660W rated load against the connected lighting load.<\/p>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n

\n
\n
\"RZ037<\/figure>\n<\/div><\/div>\n\n\n\n

Set The Dimmed Brightness From The LUX Button<\/h2>\n\n\n

The LUX button handles both daylight sensing and dimming setup. A short press toggles the light sensor function ON or OFF.<\/p>\n\n\n\n

For brightness setup, hold the LUX button for 3 seconds. The connected load loops from minimum to maximum brightness while the ON\/OFF indicators flash; release at the preferred level and wait 5 seconds for the setting to save.<\/p>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n

\n

Features, Benefits, Specs<\/h2>\n\n\n\n

RZ037-DIM 220V combines ceiling PIR sensing, Lux-based dimming behavior, and a 660W load rating so installers can verify control logic and electrical fit before ordering.<\/p>\n<\/div><\/div>\n\n\n\n

\n
\n
\"RZ037<\/figure>\n<\/div><\/div>\n\n\n\n

Features & Benefits<\/h2>\n\n\n
    \n
  • 220V-only version:<\/strong> The voltage version is fixed, helping buyers avoid treating the 110V and 220V products as interchangeable.<\/li>\n\n\n\n
  • 3A dimming load control:<\/strong> The 220V model supports a 660W rated load with 3A maximum working current.<\/li>\n\n\n\n
  • Occupancy and daylight logic:<\/strong> The sensor changes output according to presence detection and the light sensor state, rather than using one simple on\/off rule.<\/li>\n\n\n\n
  • User-set dimmed brightness:<\/strong> In defined low-light or mid-light conditions, the connected light can turn on at the saved dimming brightness instead of full output.<\/li>\n\n\n\n
  • 100% occupied output:<\/strong> With presence detected, the light turns on at 100% brightness when the light sensor is OFF or when ambient light is below 150 Lux with the light sensor ON.<\/li>\n\n\n\n
  • LUX button configuration:<\/strong> Short press toggles the light sensor, while a 3-second long press enters brightness setup and saves after release plus a 5-second wait.<\/li>\n\n\n\n
  • RZ037 ceiling PIR platform:<\/strong> The sensor keeps the 360-degree ceiling-mounted PIR coverage and adjustable time-delay behavior from the RZ037 family.<\/li>\n<\/ul>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n
    \n
    \n
    Features<\/dt>\n
    \n

    Product type<\/p>\n

    Ceiling-mounted PIR occupancy sensor dimmer<\/p>\n

    Voltage version<\/p>\n

    220V only; not interchangeable with the other voltage version<\/p>\n

    Maximum working current<\/p>\n

    3A<\/p>\n

    Rated load<\/p>\n

    660W<\/p>\n

    Wiring pattern<\/p>\n

    Line-voltage Live, Neutral, and Load wiring<\/p>\n

    Sensor type<\/p>\n

    Passive infrared (PIR)<\/p>\n

    Detection range<\/p>\n

    360 degrees<\/p>\n

    Detection diameter<\/p>\n

    8-12m when ambient temperature is below 27C<\/p>\n

    Motion detection speed<\/p>\n

    0.6-1.5m\/s<\/p>\n

    Installation height<\/p>\n

    2.5-3.5m<\/p>\n

    Time delay<\/p>\n

    15s, 30s, 1min default, 3min, 5min, 10min, 30min<\/p>\n

    Sensitivity<\/p>\n

    High or Low<\/p>\n

    Light sensor ON, no presence<\/p>\n

    Ambient light above 150 Lux: OFF; below 150 Lux: ON at user-set dimming brightness<\/p>\n

    Light sensor OFF, no presence<\/p>\n

    Light remains OFF<\/p>\n

    Light sensor ON, presence detected<\/p>\n

    Above 300 Lux: OFF; 150-300 Lux: ON at user-set dimming brightness; below 150 Lux: ON at 100% brightness<\/p>\n

    Light sensor OFF, presence detected<\/p>\n

    ON at 100% brightness<\/p>\n

    LUX button short press<\/p>\n

    Toggle light sensor function ON or OFF<\/p>\n

    LUX button long press<\/p>\n

    Hold for 3 seconds to enter dimming configuration mode<\/p>\n

    Dimming save behavior<\/p>\n

    Release at the desired brightness and wait 5 seconds for automatic save and exit<\/p>\n

    Working temperature<\/p>\n

    -10 to +40C<\/p>\n

    Working humidity<\/p>\n

    <93% RH<\/p>\n<\/dd>\n<\/dl>\n<\/div><\/div>\n\n\n\n

    FAQ<\/h2><\/div><\/div>\n\n\n\n
    \n
    \n
    \n

    Can the 220V version be used on a different voltage?<\/h3><\/div><\/div>\n\n\n\n
    \n

    No. RZ037-DIM is supplied in separate 110V and 220V versions. This 220V product must only be powered by 220V.<\/p>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n

    \n

    What load can this 220V model control?<\/h3><\/div><\/div>\n\n\n\n
    \n

    The supplied specification for this version is 3A maximum working current with a 660W rated load.<\/p>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n

    \n

    How does the sensor behave when no presence is detected?<\/h3><\/div><\/div>\n\n\n\n
    \n

    With the light sensor ON, ambient light above 150 Lux keeps the light OFF, while ambient light below 150 Lux turns the light ON at the user-set dimming brightness. With the light sensor OFF, the light remains OFF.<\/p>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n

    \n

    How does the sensor behave when presence is detected?<\/h3><\/div><\/div>\n\n\n\n
    \n

    With the light sensor ON, ambient light above 300 Lux keeps the light OFF, 150-300 Lux turns the light ON at the user-set dimming brightness, and below 150 Lux turns the light ON at 100% brightness. With the light sensor OFF, presence turns the light ON at 100% brightness.<\/p>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n

    \n

    How do installers set the dimming brightness?<\/h3><\/div><\/div>\n\n\n\n
    \n

    Hold the LUX button for 3 seconds to enter dimming configuration mode. The load loops from minimum to maximum brightness while the indicators flash. Release the button at the desired level, then wait 5 seconds for automatic save and exit.<\/p>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n

    \n

    What does a short press of the LUX button do?<\/h3><\/div><\/div>\n\n\n\n
    \n

    A short press toggles the light sensor function ON and OFF. That setting changes whether the Lux thresholds participate in the output logic.<\/p>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n

    \n

    What coverage should installers expect?<\/h3><\/div><\/div>\n\n\n\n
    \n

    The referenced RZ037 ceiling PIR manual specifies 360-degree detection with an 8-12m detection diameter when ambient temperature is below 27C, and an installation height of 2.5-3.5m.<\/p>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n

    \n

    Which setup values come from the shared RZ037 platform?<\/h3><\/div><\/div>\n\n\n\n
    \n

    The shared RZ037 manual specifies adjustable time delay, high\/low sensitivity, 360-degree PIR detection, and the ceiling-mount installation pattern. The RZ037-DIM-specific values are the fixed voltage versions, 3A current, load rating, Lux-threshold output logic, and LUX-button dimming setup.<\/p>\n<\/div><\/div>\n<\/div><\/div>\n<\/div><\/div>\n<\/div><\/div>\n\n\n\n