Kit: Low Voltage Controller + Wireless Motion Sensor

RZ016

$17.00

Связаться с нами

Купить сейчас

Купить на Amazon

Основные характеристики продукта

RZ016A: Main plug-in controller
RZ016W: Wireless, battery-powered, motion sensors
The RZ016A can work independently as a dimmer switch
The RZ016A can pair with 1 or multiple RZ016W to extend the detecting coverage

Не то, что вы ищете? Посмотреть наше портфолио:

Проконсультироваться со специалистом

Быстрая доставка: 99% в наличии

Полная линейка продуктов с активацией по движению

Запросить информацию для оптовых заказов ODM/OEM

Motion Sensor Switch Kit RZ016

The RZ016 motion sensor & controller is a remote control motion sensor kit for DC 12/24V light strips. With this kit, you can transform any light strip into motion activated style in no time.

The kit consists of two devices: The RZ016A controller and the RZ016W motion sensor. Connect the controller with your light strips, and it’s done. When the motion sensor detects your presence within the range, it will send a signal to the controller to turn on the connected light.

Multi-location Use Case

The RZ016 motion sensor kit can be used for multi-location control. The controller can pair with one, two, or multiple sensors. As long as either sensor detects motion and sends signals to the controller, the controller will turn on the light.

As the sensors are remotely connected with no wiring needed, it’s incredibly flexible and convenient for all types of complicated applications.

User-Friendly Operation

The RZ016 kit has 3 working modes. ON, OFF or Auto. In ON/OFF mode, the RZ016A controller can work standalone as a normal dimmer switch without the motion sensor.

Turn the light ON or OFF like a manual switch.
Adjust the light level like a dimmer switch.

In auto mode, the light is controlled by motion sensors automatically. You can additionally:

Select time delay from 15s to 900s.
Enable or disable the light sensor(35lux).

Plug and Play

The installation is as easy as it gets. The controller is a plug-in switch. You simply plug it in and replace the existing light strip inline switch.

Install two AAA batteries in the motion sensor. Turn on the motion sensor, and that’s it. The sensor and controller are already pre-paired from the factory.

Особенности, преимущества, характеристики

Особенности и преимущества

Задержка времени: Press this button to adjust the time delay, the time setting on the sensor from the last detected motion until the lights are turned OFF. There are 6 options for time delay:15s, 30s, 60s, 180s, 300s, 900s.
Light Level: Press this button to adjust the lighting light level. The light level will change from 20%~100%
Auto Mode: The main controller will be controlled by motion sensor (RZ016W) and turns on/off by receiving the signal from the motion sensor (RZ016W).
ON Mode: The main controller will turn on the load all the time. The motion sensor will not take effect.
OFF Mode: The main controller will turn off the load all the time. The motion sensor will not take effect.

RZ016A

Имя

Controller-Receiver

Input Voltage

DC 12~24V

Output Voltage

Equal to input voltage

Load current

≤ 5A

Static power

≤ 10 uA

Mode

Auto/ON/OFF

Задержка времени

15s, 30s, 60s, 180s, 300s, 900s Adjustable

Light Level

20%~100% Adjustable

RZ016W

Имя

Motion Sensor-Emitter

Input Voltage

2pcs AAA batteries powered

Output Voltage

Equal to input voltage

Mode

1. Sensor ON/OFF, 2. Light Sensor ON(≤35lux)/OFF

Detect range

5~8 Meters

Wireless transmission range

7-20 Meters (7M when batteries voltage is lower than 2.5V)

Видео

RZ016 Installation

RZ016 User Guide

RZ016 Pairing Guide

Расширьте свою систему датчиков движения

Посмотреть все наши энергосберегающие продукты в категории датчиков движения

Датчики движения

Выключатели с датчиком движения

Датчики присутствия

Отзывы

Отзывов пока нет.

Будьте первым, кто оставил отзыв на «Kit: Low Voltage Controller + Wireless Motion Sensor»