- \n
- Ensure that the wiring that connects the sensor\/power pack to the power\/loads is correct. Incorrect wiring can reduce performance and\/or present a safety hazard. It is advisable to consult the installation manual closely or seek professional assistance if uncertainties arise during the installation process.<\/li>\n\n\n\n
- Ensure that the sensor is placed and oriented as it was in the original drawings. Deviations from the planned layout can significantly impact the sensor’s effectiveness. Additionally, consider environmental factors such as heat sources or air currents that might affect the sensor’s operation.<\/li>\n\n\n\n
- Real-world installation may require a series of adjustments in order to fine-tune and calibrate the sensor\u2019s operation. It’s crucial to test the sensor under various conditions to ensure it operates reliably under all expected circumstances. Consider environmental factors such as the placement of furniture or equipment that might obstruct the sensor’s field of view.<\/li>\n<\/ul>\n\n\n
Time-Delay<\/h2>\n\n\n
The time-delay setting allows the operator to adjust how long the lights will stay on after the last instance of motion is detected. The usual recommended minimum delay is 15 minutes. This does several things.<\/p>\n\n\n\n
First, it avoids on-off cycles that are too frequent, if occupants enter and leave the room on a regular basis. This prevents the occupants of the room from being distracted, and will also prolong the life of the bulb. It also prevents the lights from going off too soon if an occupant has entered the room but does not move after his or her entrance. Finally, it generates an acceptable compromise between energy savings and performance.<\/p>\n\n\n\n
For different environments, adjusting the time-delay to suit the specific usage patterns can optimize energy savings without sacrificing comfort. For instance, in a rarely used storeroom, a shorter delay might be more appropriate, whereas in a busy office, a longer delay ensures that the lights remain on as needed. In environments such as libraries or study areas, where occupants may remain still for longer periods, considering a longer time-delay may be beneficial to avoid disruptions.<\/p>\n\n\n
Motion Sensitivity<\/h2>\n\n\n
This setting allows for the sensor\u2019s sensitivity to motion to be adjusted. The lower the sensitivity, the more sensitive the sensor will be to motion, meaning even small motions will turn on the lights. Higher sensitivity settings will require more distinct motions to activate the sensor. Following the installation of the sensor, there is usually a trial period during which the operator can work with the room\u2019s occupants to fine-tune this setting to their satisfaction.<\/p>\n
Voc\u00ea Tamb\u00e9m Pode Se Interessar Por<\/h3>
![\"\"](\"https:\/\/staging.rayzeek.com\/wp-content\/uploads\/2023\/07\/rz050.jpg\")
<\/div><\/a><\/div>RZ053<\/a><\/h4><\/div>
<\/div><\/div>Detalhes do Produto <\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/a><\/div>RZ052<\/a><\/h4><\/div>
<\/div><\/div>Detalhes do Produto <\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/a><\/div>RZ051<\/a><\/h4><\/div>
<\/div><\/div>Detalhes do Produto <\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>![\"\"](\"https:\/\/staging.rayzeek.com\/wp-content\/uploads\/2025\/11\/rz037-front-view.jpg\")
<\/div><\/a><\/div>RZ037-DRY Sensor de Ocupa\u00e7\u00e3o PIR de Teto com Revezamento de Contato Seco<\/a><\/h4><\/div>
- Sensor de ocupa\u00e7\u00e3o PIR para montagem no teto com sa\u00edda de rel\u00e9 de contato seco<\/li>
- Alimenta\u00e7\u00e3o de baixa tens\u00e3o de 12\/24VDC ou 12\/24VAC<\/li>
- Contatos de rel\u00e9 isolados COM, NO e NC para entradas de EMS, HVAC e controle predial<\/li><\/ul> <\/div><\/div>Detalhes do Produto <\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
![\"Imagem](\"https:\/\/staging.rayzeek.com\/wp-content\/uploads\/2026\/06\/rz048-main-clean.jpg\")
<\/div><\/a><\/div>RZ048 Interruptor Sensor de Movimento de Micro-ondas Embutido de Teto 360 Graus 12V\/24V<\/a><\/h4><\/div>
- Interruptor sensor de movimento de micro-ondas embutido no teto em baixa tens\u00e3o CC<\/li>
- Entrada de 12 VDC \/ 24 VDC com faixa de 10-30 VDC<\/li>
- Corrente m\u00e1xima de trabalho de 10A com tempo de retardo, limite Lux e sensibilidade ajust\u00e1veis<\/li><\/ul> <\/div><\/div>Detalhes do Produto <\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/a><\/div>
RZ048-10A Interruptor Sensor de Movimento de Micro-ondas Embutido de Teto 360 Graus<\/a><\/h4><\/div>
- Interruptor sensor de movimento de micro-ondas embutido no teto para maior carga<\/li>
- Entrada de tens\u00e3o de rede de 100-265 VAC, modelo 10A<\/li>
- Detec\u00e7\u00e3o de micro-ondas de 5,8 GHz com tempo de atraso, limite de Lux e sensibilidade ajust\u00e1veis<\/li><\/ul> <\/div><\/div>Detalhes do Produto <\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/a><\/div>
Interruptor de Sensor de Movimento de Micro-ondas de Teto Embutido de 360 Graus RZ048-5A<\/a><\/h4><\/div>
- Interruptor de sensor de movimento de micro-ondas embutido para teto<\/li>
- Entrada de tens\u00e3o de rede de 100-265 VAC, modelo 5A<\/li>
- Detec\u00e7\u00e3o de micro-ondas de 5,8 GHz com tempo de atraso, limite de Lux e sensibilidade ajust\u00e1veis<\/li><\/ul> <\/div><\/div>Detalhes do Produto <\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/a><\/div>
Dimmer de Sensor de Presen\u00e7a PIR de Teto 220V RZ037-DIM<\/a><\/h4><\/div>
- Dimmer de sensor de presen\u00e7a PIR para teto RZ037 para alimenta\u00e7\u00e3o de 220V<\/li>
- Corrente m\u00e1xima de trabalho de 3A com carga nominal de 660W<\/li>
- O bot\u00e3o LUX controla o Ligar\/Desligar do sensor de luz e o brilho de dimeriza\u00e7\u00e3o definido pelo usu\u00e1rio<\/li><\/ul> <\/div><\/div>Detalhes do Produto <\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/a><\/div>
Dimmer de Sensor de Presen\u00e7a PIR de Teto 110V RZ037-DIM<\/a><\/h4><\/div>
- Dimmer de sensor de presen\u00e7a PIR para teto RZ037 para alimenta\u00e7\u00e3o de 110V<\/li>
- Corrente m\u00e1xima de trabalho de 3A com carga nominal de 330W<\/li>
- O bot\u00e3o LUX controla o Ligar\/Desligar do sensor de luz e o brilho de dimeriza\u00e7\u00e3o definido pelo usu\u00e1rio<\/li><\/ul> <\/div><\/div>Detalhes do Produto <\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
![\"RZ047](\"https:\/\/staging.rayzeek.com\/wp-content\/uploads\/2026\/06\/rz047-main-product-square-1200.jpg\")
<\/div><\/a><\/div>Interruptor de Sensor de Movimento de Micro-ondas de Teto de 360 Graus 12V\/24V RZ047<\/a><\/h4><\/div>
- Interruptor de sensor de movimento de micro-ondas para teto em baixa tens\u00e3o CC<\/li>
- Entrada de 12 VDC \/ 24 VDC com faixa de 10-30 VDC<\/li>
- Corrente m\u00e1xima de trabalho de 10A com tempo de retardo, limite Lux e sensibilidade ajust\u00e1veis<\/li><\/ul> <\/div><\/div>Detalhes do Produto <\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/a><\/div>
Interruptor de Sensor de Movimento de Micro-ondas de Teto de 360 Graus RZ047-10A<\/a><\/h4><\/div>
- Interruptor de sensor de movimento de micro-ondas para teto de maior carga<\/li>
- Entrada de tens\u00e3o de rede de 100-265 VAC, modelo 10A<\/li>
- Detec\u00e7\u00e3o de micro-ondas de 5,8 GHz com tempo de atraso, limite de Lux e sensibilidade ajust\u00e1veis<\/li><\/ul> <\/div><\/div>Detalhes do Produto <\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/a><\/div>
Interruptor de Sensor de Movimento de Micro-ondas de Teto de 360 Graus RZ047-5A<\/a><\/h4><\/div>
- Interruptor com sensor de movimento por micro-ondas para montagem no teto<\/li>
- Entrada de tens\u00e3o de rede de 100-265 VAC, modelo 5A<\/li>
- Detec\u00e7\u00e3o de micro-ondas de 5,8 GHz com tempo de atraso, limite de Lux e sensibilidade ajust\u00e1veis<\/li><\/ul> <\/div><\/div>Detalhes do Produto <\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
![\"Vis\u00e3o](\"https:\/\/staging.rayzeek.com\/wp-content\/uploads\/2026\/06\/rz038-main-top-side.png\")
<\/div><\/a><\/div>![\"Vis\u00e3o](\"https:\/\/staging.rayzeek.com\/wp-content\/uploads\/2026\/06\/rz038-main-front.png\")
<\/div><\/a><\/div>