What is Induction Lamp
An induction lamp is a type of lighting technology which operates based on the principle of magnetic induction, utilizing external radio-frequency or microwave radiation to stimulate the gases and metals within the lamp tube. This stimulation causes the emission of ultraviolet (UV) radiation. To produce visible light, a phosphor coating is applied to the lamp tube, which is then excited by the UV radiation and emits the desired wavelengths of visible light.
Mencari Solusi Hemat Energi Berbasis Sensor Gerak?
Hubungi kami untuk sensor gerak PIR lengkap, produk hemat energi berbasis sensor gerak, sakelar sensor gerak, serta solusi komersial Occupancy/Vacancy.
Induction lamps offer several advantages over traditional fluorescent lamps. They have a longer lifespan due to the absence of internal electrodes, which are a common point of failure in regular fluorescent lamps. Additionally, induction lamps are known for their energy efficiency, improved safety conditions, enhanced visual performance, and environmental friendliness.
There are two types of induction lamps: internal magnetic induction lamps and external magnetic induction lamps.
Mungkin Anda Tertarik Dengan
- Ceiling-mounted PIR occupancy sensor dengan output dry-contact relay
- Suplai tegangan rendah 12/24VDC atau 12/24VAC
- Kontak relai terisolasi COM, NO, dan NC untuk input EMS, HVAC, dan kontrol gedung
- Low-voltage DC recessed ceiling-mounted microwave motion sensor switch
- Input 12 VDC / 24 VDC dengan rentang 10-30 VDC
- Arus kerja maks 10A dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Higher-load recessed ceiling-mounted microwave motion sensor switch
- Input tegangan jala-jala 100-265 VAC, model 10A
- Penginderaan gelombang mikro 5.8 GHz dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Recessed ceiling-mounted microwave motion sensor switch
- Input tegangan jala-jala 100-265 VAC, model 5A
- Penginderaan gelombang mikro 5.8 GHz dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer untuk daya 220V
- Arus kerja maksimum 3A dengan beban pengenal 660W
- Tombol LUX mengontrol ON/OFF sensor cahaya dan kecerahan peredupan yang diatur pengguna
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer untuk daya 110V
- Arus kerja maksimum 3A dengan beban pengenal 330W
- Tombol LUX mengontrol ON/OFF sensor cahaya dan kecerahan peredupan yang diatur pengguna
- Sakelar sensor gerak gelombang mikro plafon DC tegangan rendah
- Input 12 VDC / 24 VDC dengan rentang 10-30 VDC
- Arus kerja maks 10A dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Sakelar sensor gerak gelombang mikro plafon beban lebih tinggi
- Input tegangan jala-jala 100-265 VAC, model 10A
- Penginderaan gelombang mikro 5.8 GHz dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Sakelar sensor gerak gelombang mikro plafon
- Input tegangan jala-jala 100-265 VAC, model 5A
- Penginderaan gelombang mikro 5.8 GHz dengan waktu tunda (time delay), ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Sakelar sensor gerak PIR tanam plafon DC tegangan rendah
- Input 12 VDC / 24 VDC dengan rentang 10-30 VDC
- Arus kerja maks 10A dengan jeda waktu, ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Sakelar sensor gerak PIR tanam plafon beban lebih tinggi
- Input tegangan jala-jala 100-265 VAC, model 10A
- Deteksi 360 derajat dengan jeda waktu, ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Sakelar sensor gerak PIR tanam plafon
- Input tegangan jala-jala 100-265 VAC, model 5A
- Deteksi 360 derajat dengan jeda waktu, ambang batas Lux, dan sensitivitas yang dapat disesuaikan
- Kit penerima dan sakelar nirkabel untuk kontrol pencahayaan ON/OFF dalam ruangan
- Penerima 100-230VAC, 50/60Hz dengan arus nominal 5A
- Sakelar nirkabel bertenaga CR2032 dengan komunikasi 2.4GHz
- Okupansi (Auto-ON/Auto-OFF)
- 12–24V DC (10–30VDC), hingga 10A
- Cakupan 360°, diameter 8–12 m
- Jeda waktu 15 dtk–30 mnt
- Sensor cahaya Mati/15/25/35 Lux
- Sensitivitas Tinggi/Rendah
- Mode okupansi Auto-ON/Auto-OFF
- 100–265V AC, 10A (diperlukan kabel netral)
- Cakupan 360°; diameter deteksi 8–12 m
- Jeda waktu 15 dtk–30 mnt; Lux MATI/15/25/35; Sensitivitas Tinggi/Rendah
- Mode okupansi Auto-ON/Auto-OFF
- 100–265V AC, 5A (diperlukan kabel netral)
- Cakupan 360°; diameter deteksi 8–12 m
- Jeda waktu 15 dtk–30 mnt; Lux MATI/15/25/35; Sensitivitas Tinggi/Rendah
- 100V-230VAC
- Jarak Transmisi: hingga 20m
- Sensor gerak nirkabel
- Kontrol berkabel
- Tegangan: 2x Baterai AAA / 5V DC (Micro USB)
- Mode Siang/Malam
- Jeda waktu: 15mnt, 30mnt, 1j (bawaan), 2j
- Adaptor daya colokan UE
- Adaptor daya colokan Inggris
- Internal magnetic induction lamps feature a light bulb-shaped glass lamp with a central cavity coated with phosphors. This cavity is filled with inert gas and a pellet of mercury amalgam. An induction coil, excited by high-frequency energy from an external electronic ballast or generator, is wound around a ferrite shaft inserted into the central cavity. The coil creates a magnetic field that excites the mercury atoms, leading to the emission of UV light that is converted to visible light by the phosphor coating.
- External magnetic induction lamps, on the other hand, are similar to fluorescent lamps but with electromagnets wrapped around a section of the lamp tube. High-frequency energy from an electronic ballast is sent through wires wrapped in a coil around a ferrite inductor, generating a powerful magnetic field. This field excites the mercury atoms inside the lamp, causing the emission of UV light that is then converted to visible light by the phosphor coating.
Frequently Asked Questions
What Does Induction Mean in Lighting
Induction lighting refers to a type of fluorescent lighting technology that utilizes electromagnetic energy to initiate a series of reactions, resulting in the production of light by phosphors. Unlike conventional fluorescent lighting, induction lighting does not have a filament or electrodes, making it more efficient and significantly longer-lasting.
What Is Induction Lamps Used For
This type of lighting has a long history of over 100 years and can last up to 100,000 hours. Due to its durability, induction lighting is commonly utilized in industrial settings like factories and for roadway lighting in street lights.
What Is a Major Advantage of Using Induction Type Lamps
The primary benefit of utilizing induction type lamps is that they do not have electrodes, which are a common point of failure in traditional fluorescent lamps. As a result, induction lamps have an exceptionally long lifespan, rated at 100,000 hours.
What Is the Difference Between Fluorescent Lamp and Induction Lamp
Induction lamps distinguish themselves from fluorescent lamps by not utilizing internal electrodes. Instead, they employ a high-frequency generator with a power coupler. This generator generates a radio frequency magnetic field to stimulate the gas fill.
