RZ048-10A 360-Degree Recessed Ceiling Microwave Motion Sensor Switch
RZ048-10A هو إصدار التيار المتردد الأعلى حمولة من مفتاح مستشعر الحركة بالميكروويف المدمج في السقف للتحكم التلقائي في الإضاءة.
يحافظ على نفس استشعار الميكروويف بتردد 5.8 GHz ونفس تصميم RZ048 السقفي المدمج مثل طراز 5A، مع استخدام تصنيفات حمل 10A مدعومة من المصدر لدوائر الإضاءة المتوافقة بجهد 100-265 VAC.
- مدخل جهد خط 100-265 VAC، موديل 10A
- استشعار ميكروويف بتردد 5.8 GHz مع تغطية 360 درجة
- قطر كشف 8-12 m في الظروف اليدوية
- تأخير زمني: من 15 s إلى 30 min
- إعداد Lux: إيقاف، 15 أو 25 أو 35 Lux
يسلط الضوء على المنتج
- طراز التيار المتردد 10A: مفتاح مستشعر ميكروويف سقفي مدمج بجهد 100-265 VAC مع تصنيفات حمل أعلى مدعومة من المصدر مقارنة بطراز 5A.
- استشعار بالميكروويف: كشف دوبلر بتردد 5.8 GHz مع تغطية سقفية بزاوية 360 درجة.
- تركيب مدمج: تركيب بالبراغي أو بمشبك زنبركي مع فتحة سقف دائرية مقاس 82-90 mm.
ليس ما تبحث عنه؟ عرض محفظتنا:
استشارة خبير
Higher-Load AC Microwave Control In A Recessed Ceiling Form
The RZ048-10A is the higher-load AC model in the RZ048 recessed ceiling microwave sensor family, built for automatic lighting control where a ceiling sensor is the right detection position.
It uses 100-265 VAC live, neutral, and load wiring, with manual adjustment for time delay, Lux threshold, and high/low sensitivity after installation.
Higher-Load AC Sensing For Shared Indoor Lighting
Use the RZ048-10A when the project needs the recessed RZ048 microwave sensing platform and the higher verified AC load profile shown in the manual.
Ceiling placement can suit corridors, shared rooms, utility areas, and similar indoor spaces, provided the sensor is positioned to avoid unwanted detection through doors, windows, partitions, metal surfaces, or moving equipment.
الميزات والفوائد والمواصفات
The RZ048-10A pairs 10A AC load ratings with recessed mounting and 5.8 GHz microwave detection so installers can compare load capacity, room coverage, and adjustment options.
الميزات والفوائد
- 10A line-voltage control: Supports 100-265 VAC lighting circuits with the source-backed RZ048-10A load ratings shown in the specifications.
- Higher AC load profile: The 10A model is the RZ048 choice when the verified lighting load exceeds the 5A model rating.
- 5.8 GHz microwave sensing: High-frequency Doppler detection actively senses movement for ceiling-mounted automatic lighting control.
- Recessed ceiling form: Screw mount or spring clip mounting supports a low-profile ceiling installation with the documented 82-90 mm cutout.
- 360-degree ceiling coverage: Ceiling placement gives broad room coverage with an 8-12 m detection diameter under manual conditions.
- Non-metal material penetration: Microwave detection can pass through many plastics, glass, and thin partitions, while metal blocks detection.
- High/low sensitivity: The SENS button helps reduce nuisance detection through doors, glass, partitions, or adjacent spaces.
- سمات
-
Model
RZ048-10A
Product type
Recessed ceiling-mounted microwave motion sensor switch
Sensor type
High-frequency microwave Doppler (HF)
Microwave frequency
5.8 GHz ISM band
Transmission power
0.4 mW
تأخير الوقت
15 s, 30 s, 1 min (default), 3 min, 5 min, 10 min, 30 min
Light sensor level
إيقاف، 15 لوكس، 25 لوكس (افتراضي)، 35 لوكس
حساسية
High or Low
Material penetration
Detects through most plastics, glass, and thin partitions; metal blocks detection
- Electrical
-
مصدر الطاقة
100 فولت تيار متردد ~ 265 فولت تيار متردد
Power frequency
50/60 Hz
الأسلاك
White to Neutral; Red to Load; Black to Live
استهلاك الطاقة
0.5 W or less standby; 1 W operation
Incandescent / Halogen load
1000 W / 110 VAC; 2200 W / 220 VAC
Fluorescent / Ballast / LED load
500 W / 110 VAC; 1000 W / 220 VAC
- Detection & Installation
-
Detection diameter
8-12 m
Detection range
360-degree ceiling coverage
Installation height
2.5-5 m
Working temperature
-10 to +40 C
Working humidity
< 93% RH non-condensing
Mounting methods
Screw mount or spring clip mount
Ceiling cutout
82-90 mm circular hole for spring clip mounting
Face diameter
106 mm
Body diameter
78 mm
Height
64 mm overall; 25 mm lower visible section
Metal clearance
Keep at least 1 m from large metal or highly reflective surfaces; do not fully enclose in metal
Installation notes
Avoid windows, doors, automatic doors, rotating equipment, HVAC airflow, fans, moving machinery, vibrating fixtures, and direct view to public corridors or outdoor areas
التعليمات
How is the RZ048-10A different from the 5A model?
The 10A model has higher verified AC load ratings. Both models use 100-265 VAC input, neutral-required wiring, the same recessed RZ048 ceiling form, and the same microwave sensing platform.
Does the RZ048-10A need a neutral wire?
Yes. The AC wiring diagram requires White to Neutral, Red to Load, and Black to Live.
What loads can the 10A model control?
The manual lists 1000 W / 110 VAC and 2200 W / 220 VAC for incandescent or halogen loads, and 500 W / 110 VAC and 1000 W / 220 VAC for fluorescent, ballast, or LED loads.
Can microwave sensing detect through glass or partitions?
Yes. The manual states that microwave sensing can detect through most plastics, glass, and thin partitions, while metal blocks detection. Placement and sensitivity should be adjusted accordingly.
How can nuisance triggering be reduced?
Reduce sensitivity to Low or relocate the sensor to avoid doors, windows, adjacent spaces, moving machinery, HVAC airflow, fans, vibrating fixtures, and large metal or reflective surfaces.
What time delay settings are available?
Time delay settings are 15 s, 30 s, 1 min, 3 min, 5 min, 10 min, and 30 min. The manual default is 1 min.
المراجعات
لا توجد مراجعات بعد.